journal article·2019-01-02

High temperature tensile properties of 316LN stainless steel investigated using automated ball indentation technique

J. Ganesh Kumar, V. Ganesan, K. Laha

Materials at High Temperatures· Volume 36· Issue 1
Publisher page

Abstract

Type 316LN stainless steel (SS) is the principal structural material for the components of sodium cooled fast reactors operating under elevated temperature conditions. In order to assess the degradation in strength of service exposed components using a small specimen testing technique such as automated ball indentation (ABI), it is necessary to carry out prior detailed ABI studies on the virgin material. In this investigation, the tensile behaviour of as-received 316LN SS were investigated at several temperatures in the range 298–973 K using ABI technique. The load-depth of indentation data measured from ABI tests was analyzed using semi-empirical relationships to obtain the tensile properties. The yield stress and the flow curves were determined by correlating ABI results with corresponding uniaxial tensile test results. Trend curve for tensile strength with temperature, as estimated from ABI tests, exhibited a plateau region in the temperature around 823 K, similar to uniaxial tensile tests. The variations of strength coefficient, strain hardening exponent, yield ratio, hardness and uniform ductility with temperature were evaluated from ABI tests. The ABI technique was found to estimate the influence of temperature on tensile properties sensitively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Non-Destructive Testing Techniques · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research , Kalpakkam, India

References (28)

Show source-provided references
1. Haggag FM · 1989 · 170 · 101
2. 10.1016/j.nucengdes.2015.03.01510.1016/j.nucengdes.2015.03.015 ↗
3. 10.1016/j.proeng.2015.12.33310.1016/j.proeng.2015.12.333 ↗
4. 10.1016/S0308-0161(97)00114-210.1016/S0308-0161(97)00114-2 ↗
5. 10.1016/S0022-3115(97)00338-310.1016/S0022-3115(97)00338-3 ↗
6. 10.1016/S0308-0161(98)00093-310.1016/S0308-0161(98)00093-3 ↗
7. 10.1016/S0921-5093(99)00140-910.1016/S0921-5093(99)00140-9 ↗
8. 10.1016/S0308-0161(99)00006-X10.1016/S0308-0161(99)00006-X ↗
9. 10.1016/j.matlet.2005.01.07410.1016/j.matlet.2005.01.074 ↗
10. 10.1016/j.jnucmat.2012.07.03710.1016/j.jnucmat.2012.07.037 ↗
11. 10.1007/BF0270329310.1007/BF02703293 ↗
12. 10.1179/174328408X31706610.1179/174328408X317066 ↗
13. 10.1016/j.nucengdes.2010.02.03810.1016/j.nucengdes.2010.02.038 ↗
14. 10.1179/1878641314Y.000000002010.1179/1878641314Y.0000000020 ↗
15. 10.1007/978-1-4613-0155-410.1007/978-1-4613-0155-4 ↗
16. Karthik V · J Test Eval · 2007 · 35 · 43810.1520/JTE100713 ↗
17. RCC-MRx · 2012
18. Tabor D · 1951
19. 10.1115/1.344337810.1115/1.3443378 ↗
20. 10.1016/j.jmps.2005.04.00710.1016/j.jmps.2005.04.007 ↗
21. Haggag FM . Standard test methods for automated ball indentation (ABI) testing of metallic materials and structures to determine tensile properties and stress–strain curves. In: In-situ measurement of pipeline mechanical properties using stress-strain microprobe – validation of data for increased confidence & accuracy. Pipeline Research Council International (PRCI) Catalog no. L55280, April 2007. p. 37–60.10.55274/R0010668 ↗
22. 10.1016/j.msea.2010.06.03410.1016/j.msea.2010.06.034 ↗
23. 10.1520/STP12719S10.1520/STP12719S ↗
24. 10.1515/htmp-2014-011410.1515/htmp-2014-0114 ↗
25. Dieter George E . Mechanical metallurgy. 2nd ed. London: McGraw-Hill Book; 1988. p. 289.
26. 10.1179/1878641314Y.000000000910.1179/1878641314Y.0000000009 ↗
27. 10.1007/BF0274399310.1007/BF02743993 ↗
28. 10.1016/j.msea.2004.12.03310.1016/j.msea.2004.12.033 ↗