journal article·2000-01

A comparison of breakaway oxidation in wedge-shaped and parallel sided coupons of FeCrAl alloys

H. Al-Badairy, G. J. Tatlock, M. J. Bennett

Materials at High Temperatures· Volume 17· Issue 1
Publisher page

Abstract

At elevated temperatures, FeCrAl based alloys go into non-protective breakaway oxidation when the aluminium content drops below a critical level and α-alumina ceases to form. For 2-mm thick coupons, even at 1,300°C, this may take several thousand hours of isothermal oxidation and it can be quite difficult to obtain samples in the critical period immediately before breakaway commences. An alternative approach has been developed, which involves the oxidation of wedge-shaped samples with a 7° taper. The surface to volume ratio varies along the wedge, hence the aluminium reservoir is depleted first at the thin end of the sample, where breakaway commences, and then moves progressively up to the wedge. There is always a region on each sample which can be studied next to the breakaway area. Although the test can be used to rank alloys by the ease with which breakaway progresses, there is clearly a difference between a parallel sided coupon just prior to breakaway and a wedge where one adjacent region has already gone into breakaway. Electron microscopy and analysis have been used to explore these differences and preliminary results are reported.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (4)

Show source-provided references
1. Itoh I. · Nippon Steel Technical Report · 1995 · 64 · 69
2. 10.1179/mst.1994.10.2.12610.1179/mst.1994.10.2.126 ↗
3. 10.1002/maco.1994045040410.1002/maco.19940450404 ↗
4. 10.4028/www.scientific.net/SSP.41.23510.4028/www.scientific.net/SSP.41.235 ↗