journal article·2024-11Open access

Estimating the Monkman−Grant relation in the presence of errors in measurement of times to failure and minimum creep rates: with application to some high temperature materials

Mark Evans

Materials at High Temperatures· Volume 41· Issue 5-6

Abstract

The Monkman−Grant relation has the potential to reduce the development cycle for new materials, as it provides a means of lifting based on minimum creep rates that are typically observed early on. This paper outlines problems in estimating the nature of this relation using the least squares technique that stems from errors made in measuring failure times and minimum creep rates. The paper outlines some solutions to this problem that have been proposed within the scientific literature – such as reverse regression and the Deming regression. The evidence from the materials studied in this paper, suggest that the use of least squares results in overly conservative lifetime predictions when using the Monkman-Grant relation. It was found that for 2.25Cr-1Mo steel, the life expected for a minimum creep rate of 3.67E-12s−1 was 57 years when the least squares technique was used, but this increased to 78 years when using the Deming regression.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Probabilistic and Robust Engineering Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Structural Materials, Swansea University, Bay Campus, Swansea, UK

References (19)

Show source-provided references
1. Allen D Garwood S. Energy materials-strategic research agenda. 2007. Available online [cited 2019 May 28]. Available from: www.matuk.co.uk/docs/1_StrategicResearchAgenda%20FINAL.pdf
2. Monkman FC, Grant NJ. An empirical relationship between rupture life and minimum creep rate in creep-rupture tests. Proc Am Soc Test Mater. 1956;56:593–620.
3. Foster DJ. The determination of uncertainties in creep testing to European standard prEN 10291. Stand Meas & Test Project No SMT4-CT97-2165. 2000;1:1–35.
4. 10.1179/mst.1989.5.7.69910.1179/mst.1989.5.7.699 ↗
5. NIMS Creep Data Sheet No. 3B. Data sheets on the elevated-temperature properties of 2.25Cr-1Mo steel for boiler and heat exchanger seamless tubes (SUS 403-B). Tokyo, Japan: National Research Institute for Metals; 1986.
6. NIMS Creep Data Sheet No.15B. Data sheets on the elevated-temperature properties of 18Cr-12Ni-Mo stainless steel bars for general application (SUS 316-B). Tokyo, Japan: National Research Institute for Metals; 1988.
7. NIMS Creep Data Sheet No. 34B. Data sheets on the elevated-temperature properties of nickel based 19Cr-18Co-4Mo-3Ti-3Al-B superalloy castings and forgings for gas turbine blades. Tokyo, Japan: National Research Institute for Metals; 1993.
8. 10.1080/07350015.1983.1050932610.1080/07350015.1983.10509326 ↗
9. 10.1021/acs.analchem.0c0217810.1021/acs.analchem.0c02178 ↗
10. 10.1093/clinchem/39.3.42410.1093/clinchem/39.3.424 ↗
11. Gillard JW Iles TC. Method of moments estimation in linear regression with errors in both variables. Cardiff University School of mathematics technical paper. 2005.
12. 10.1007/978-1-4612-0795-5_710.1007/978-1-4612-0795-5_7 ↗
13. 10.1093/biomet/39.1-2.9610.1093/biomet/39.1-2.96 ↗
14. 10.2307/140191710.2307/1401917 ↗
15. 10.1115/1.404426410.1115/1.4044264 ↗
16. 10.1016/S1359-6462(01)00953-810.1016/S1359-6462(01)00953-8 ↗
17. 10.1007/s11661-016-3587-310.1007/s11661-016-3587-3 ↗
18. 10.1179/mht.2004.00410.1179/mht.2004.004 ↗
19. 10.1119/1.163248610.1119/1.1632486 ↗