A new scatter band assessment procedure for multi-heat fatigue life data
Source abstract
Abstract
Two methods for fatigue life data assessment were introduced and verified for low cycle fatigue (LCF) tests on a 10%Cr-steel grade. With these methods mean fatigue life curves were calculated withregression analysis for single temperaturestemperature dependent approach on the basis of a cycle-temperature-parameterThe first method shows an acceptable fit of the experimental data. However, an unfavourable cross-over of mean curves could only be avoided with a graphical optimization, which affects the repeatability of the assessment procedure adversely. Further the description of the plastic strain amplitude is unsatisfactory.The second method represents a new procedure. This temperature dependent description of the fatigue life behaviour is based on a cycle-temperature-parameter which is developed from the hysteresis loop at mid fatigue life time. The necessary data can be derived from the standard assessment of LCF tests. This second method delivers an acceptable description of multi-heat fatigue life in comparison to the first method.Summarizing it can be stated that an analytic procedure was developed which considers the influence of temperature in a suitable way and which allows a determination of mean curves and scatter band parameters in a reproducible manner. Future work will focus on the influence of hold times and of strain rates. An extension of the assessment method for different materials and temperature ranges is also planned.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Berger C. · Conf on Advances in Materials Technology for Fossil Power Plants, Hilton Head Island, South Carolina (Session · 2004 · 4 · 19 S
2. Linn, S., Schwienheer, M. and Scholz, A. (2005)Manual for Software for Scatter Band Assessment of CreepDESA 3.0, Institut ffir Werkstoffkunde, TU Darmstadt (2005).
3. Larson ER. · Trans. ASME · 1952 · 74 · 765
4. Kloos K. H. · Mat.-wiss. und Werkstofftech · 1994 · 25 · 176
5. Krempl E · 1969
6. 10.1007/BF0232105610.1007/BF02321056 ↗
7. Coffin L. F · Waterloo, Canada, Vol · 1977 · 1 · 263
8. Berger, C., Scholz, A. and Znajda, R. (2004) Betriebsähn-ches Langzeitdehnwechselverhalten wichtiger Stahlsorten, Forschungsvorhaben AVIF-Nr. A 165, FKM-Nr. 052500, Institut ffir Werkstoffkunde, TU Darmstadt, final report.
9. Znajda R. · 2004
10. Schwienheer M. · 2002 · 1418
11. Scholz, A. and Berger, C. (2005) Deformation and Life Assessment of High Temperature Materials under Creep Fatigue Loading,Proc. 1st Symp. on Structural Durability, Darmstadt, 311–328.10.1002/mawe.200500941 ↗
12. Moos, K. H., Granacher, J. and Rieth, P. (1980)Proc. Int. Conf Engineering Aspects of Creep, Sheffield, pp. 91–96.