Effect of creep deformation at 625°C on microstructure development of VM12 steel
Source abstract
Abstract
The microstructure in the new COST martensitic 12% chromium steel VM12 developed for advanced power stations operated around 625 – 650°C has been investigated in the ‘as-received condition’ and after long-term creep exposure at 625°C up for around 29,000 h. Quantitative TEM analyses of VM12 steel microstructure were undertaken to determine the dislocation density within the sub-grain, the width of the martensite laths/sub-grains and the particle parameters (shape, size, distribution). Phase identification was performed using electron diffraction and X-ray spectrometry.The TEM results showed that thermal exposure and creep deformation at 625°C caused some changes of the VM12 steel microstructure. The statistical quantitative analyses of the microstructural parameters, showed that the sub-grain size and the size of M23C6 precipitates slightly increased after exposure up to 29,000 h. In the creep-tested specimens, microstructural changes were much more pronounced than in the thermally-exposed specimens. This paper discusses the influence of the VM12 microstructure changes on long-term rupture strength.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.