journal article·2024-01-02

Creep of IN738LC manufactured with laser powder bed fusion: effect of build orientation and twinning

Sandra Megahed, Karl Michael Krämer, Christoph Heinze, Christian Kontermann, Annett Udoh, Stefan Weihe, Matthias Oechsner

Materials at High Temperatures· Volume 41· Issue 1
Publisher page

Abstract

The microstructural anisotropy caused by the highly oriented solidification of the metal Laser Powder Bed Fusion (PBF-LB/M) process affects mechanical short- and long-term properties. Component build orientation influences grain morphology and orientation, and thus, mechanical properties. While the creep behaviour of samples manufactured parallel and perpendicular to the build direction are studied intensively, the 45° build orientation remains uncharacterised. In this study, IN738LC creep samples are manufactured via PBF-LB/M in three build orientations (0°, 45° and 90°). While the results of 90° and 0° are as expected, where 90° achieves the longest time to rupture and largest rupture strain, the 45° specimen shows the least fracture time. Differences in microstructure and twinning behaviour are identified as one of the root causes for this unexpected behaviour. This study discusses the correlation between microstructure, twinning and build orientation and their effect on creep behaviour, with special focus on the 45° build orientation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Chair and Institute for Materials Technology, Technical University Darmstadt, Darmstadt, Germany

Siemens Energy Global GmbH & Co. KG, Gas Services, Distributed, Additive Manufacturing, Technology Innovation and Digitalisation, Berlin, Germany

Materials Testing Institute, University of Stuttgart, Stuttgart, Germany

Funding

Institute of Materials Technology of the Technical University Darmstadt under the guidance of Prof. Dr.-Ing. Matthias Oechsner and by the Materials Testing Institute at the University of Stuttgart

References (38)

Show source-provided references
1. DIN EN ISO 17296-3:2016-12 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014). Berlin: Beuth Verlag GmbH.
2. DIN EN ISO 17296-4:2016-12 Additive manufacturing - General principles - Part 4: Overview of data processing (ISO 17296-4:2014). Berlin: Beuth Verlag GmbH.
3. DIN EN ISO/ASTM 52900:2022-03 Additive manufacturing - General principles - Fundamentals and vocabulary (ISO/ASTM 52900:2021);. Berlin: Beuth Verlag GmbH.
4. 10.1016/j.addma.2021.10194810.1016/j.addma.2021.101948 ↗
5. Bieber CG Galker JJ. Cast nickel-base Alloy. US3459545A. 1967.
6. Sims C. A history of superalloy metallurgy for superalloy metallurgists. Superalloys. 1984;399–419.
7. 10.1016/j.matdes.2015.10.02710.1016/j.matdes.2015.10.027 ↗
8. 10.1016/j.matchar.2016.02.00410.1016/j.matchar.2016.02.004 ↗
9. 10.1016/j.actamat.2017.02.00710.1016/j.actamat.2017.02.007 ↗
10. 10.1108/1355254131132328110.1108/13552541311323281 ↗
11. 10.1016/j.ijmachtools.2021.10372910.1016/j.ijmachtools.2021.103729 ↗
12. 10.1016/j.msea.2014.10.00310.1016/j.msea.2014.10.003 ↗
13. 10.1016/j.scriptamat.2016.10.03510.1016/j.scriptamat.2016.10.035 ↗
14. 10.4028/www.scientific.net/MSF.502.14510.4028/www.scientific.net/MSF.502.145 ↗
15. Tofighi Naeem M, Ali Jazayeri S, Rezamahdi N. Failure analysis of gas turbine blades; November 17-19, 2008; Proceedings of the 2008 IAJC-IJME International Conference, Nashville; 2008.
16. 10.1155/2018/765030310.1155/2018/7650303 ↗
17. 10.1038/s41524-017-0023-110.1038/s41524-017-0023-1 ↗
18. Callister WD, Rethwisch DG. Fundamentals of materials science and engineering. 4th edn ed. Hoboken, N.J: Wiley; 2013.
19. 10.1016/j.jallcom.2021.15886810.1016/j.jallcom.2021.158868 ↗
20. 10.1016/j.addma.2018.05.03010.1016/j.addma.2018.05.030 ↗
21. DIN EN ISO 204:2019-04, Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2018). Berlin: Beuth Verlag GmbH.
22. Porter DA, Easterling KE. Phase transformations in metals and alloys. 2nd edn ed. London, Weinheim: Chapman & Hall; 1997.
23. 10.1016/j.matdes.2021.10964710.1016/j.matdes.2021.109647 ↗
24. 10.1039/C6RA19982H10.1039/C6RA19982H ↗
25. Callister WD, Rethwisch DG. Fundamentals of materials science and engineering. 5th edn ed. Hoboken: Wiley; 2015.
26. Choi BG, Kim IS, Kim DH, et al. ETA phase formation during thermal exposure and its effect on mechanical properties in Ni-base superalloy GTD 111. In: Green KA, Pollock TM, Harada H, Howson TE, Reed RC,Schirra JJ, Walston S, editors. ‘Superalloys 2004 (tenth international symposium)’. Pittsburgh, PA, USA: TMS; 2004. p. 163–171.
27. 10.1016/j.actamat.2019.12.03810.1016/j.actamat.2019.12.038 ↗
28. 10.1007/978-3-030-51834-9_6210.1007/978-3-030-51834-9_62 ↗
29. 10.1016/j.actamat.2022.11820610.1016/j.actamat.2022.118206 ↗
30. 10.1016/j.scriptamat.2016.08.02910.1016/j.scriptamat.2016.08.029 ↗
31. 10.1016/j.actamat.2015.01.05010.1016/j.actamat.2015.01.050 ↗
32. 10.1007/978-3-662-55771-610.1007/978-3-662-55771-6 ↗
33. 10.1201/978042929391710.1201/9780429293917 ↗
34. 10.1007/BF0325795510.1007/BF03257955 ↗
35. 10.7449/1989/SUPERALLOYS_1989_79_9510.7449/1989/SUPERALLOYS_1989_79_95 ↗
36. Heat treating. Vol. 4. 10th edn ed. Ohio, ASM:Materials ParkInternational; 2007.
37. 10.1016/j.msea.2011.02.05210.1016/j.msea.2011.02.052 ↗
38. Koul AK, Immarigeon J-P, Castillo R, et al. Rejuvenation of service-exposed in 738 turbine blades. In: Reichman S, Duhl DN, Maurer G, Antolovich S, Lund C. editors, Superalloys. Vol. 1988. Pittsburgh, PA, USA: The Metallurgical Society; 1988. p. 755–764.