journal article·1999-01

Crack growth under constant sustained load at elevated temperature in IN718 superalloy

C.M. Branco, J. Baptista, J. Byrne

Materials at High Temperatures· Volume 16· Issue 1
Publisher page

Abstract

Crack growth rate ( da/dt) in IN718 nickel base superalloy has been studied at 600 and 700°C, in both compact tension and corner crack specimens, under sustained constant load conditions, generating an intergranular fracture mode. Using the stress intensity factor, K, as the correlating parameter, slower growth rates are found for corner cracks than for the through cracks in CT specimens together with a greater degree of crack tunneling. In the CT specimens, the introduction of lateral side grooves increases the crack growth rate. Disparities found between growth rates in the CC geometry are found to correlate with the incubation time for re-initiation of crack growth, which is attributed to a crack tip blunting and creep mechanism. A limited assessment of the correlation of growth rates using the creep crack growth parameter C* is made.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Jeal R.H · 1983 · 528
2. 10.1007/978-94-009-1714-9_1710.1007/978-94-009-1714-9_17 ↗
3. 10.1299/jsmeb.36.110.1299/jsmeb.36.1 ↗
4. Landes, J.D. and Begley, J.A.A Fracture Mechanics Approach to Creep Crack Growth. Mechanics of crack growth,pp. 129–148, ASTM STP590 (1976).10.1520/STP33943S ↗
5. Smith, D.J.; Webster, G.A.Estimates of the C* Parameter for CrackGrowth in Creeping Materials. Elastic-Plastic Fracture SecondSymposium, pp. 654-674, ASTM (1984).10.1520/STP37321S ↗
6. Dimopulos V. · Influence of Cycling to Mean Load Ratio on Creep-Fatigue Crack Growth. Met. Trans. A, · 1988 · 19 · 873
7. American Society for Testing and Materials, ASTM. Standard Test Method for Measurement of Creep Crack Growth Rates in Metals. E1457-92, pp. 1031-1043 (1993).
8. 10.1007/978-94-009-1714-9_610.1007/978-94-009-1714-9_6 ↗
9. 10.1520/STP33107S10.1520/STP33107S ↗
10. 10.1520/STP23243S10.1520/STP23243S ↗
11. Gayda J. · 1987 · pp. 293
12. Skelton, R.P.Damage Factors during High Temperature Fatigue Crack Growth. ESIS 15, pp. 191–218. Ainsworth, R.A. and Skelton, R.P. (eds) Mechanical Engineering Publications, London (1993).
13. Skelton R.P. · Mat. High Temp. · 1994 · 12 · 6710.1080/09603409.1994.11689471 ↗
14. Ghonem H. · Depth of Intergranular Oxygen Diffusion during Environment Dependent Fatigue Crack Growth in Alloy 718. Mat. Sci. Eng. · 1992 · 150 · 151
15. 10.1111/j.1460-2695.1993.tb00103.x10.1111/j.1460-2695.1993.tb00103.x ↗
16. 10.1007/978-94-017-1771-710.1007/978-94-017-1771-7 ↗
17. 10.1016/0921-5093(92)90358-810.1016/0921-5093(92)90358-8 ↗
18. 10.1007/978-94-009-1714-9_710.1007/978-94-009-1714-9_7 ↗
19. Weerasooriya T. · 1987 · pp. 101
20. 10.1111/j.1460-2695.1987.tb01156.x10.1111/j.1460-2695.1987.tb01156.x ↗
21. Sadananda K. · Creep Crack Growth in Alloy 718. Met. Trans. · 1987 · 8 · 439
22. 10.1016/0020-7683(82)90071-310.1016/0020-7683(82)90071-3 ↗
23. Branco C.M. · Fatigue Behaviour of Nickel Based Superalloy IN718 at Elevated Temperature. Mat. High Temp. · 1994 · 12 · 261
24. Branco C.M. · 1996 · pp. 6
25. Wilkinson C. · 1991
26. Pickard A.C · 1986