Sensitivity analysis of steel hole plate by utilizing computational methods and newly developed creep model
Source abstract
Abstract
The rise in operational parameters, structural elements within power plants are exposed to heightened temperatures and pressures, reaching levels conducive to creep. Considerable work has been devoted in the previous decades to understand the basic mechanism of material’s creep deformation. Specifically for stainless steel, this article presents a modified model that builds upon the Norton-Bailey and Kachanov–Rabotnov constitutive models to thoroughly characterise all three phases of creep (primary, secondary, and tertiary). The proposed model undertakes numerical calculations to simulate damage development in thin-hole steel plate. The outcomes of the study reveal the efficacy of the novel model in generating complete creep curves for stainless steel, emphasising the notable impact of stress on creep behaviour and damage progression. Sensitivity studies are carried out using Response Surface Methodology (RSM) and Analysis of Variance (ANOVA) to analyse the new creep model data both statistically and qualitatively in relation to existing models.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Load-Bearing Analysis · Metallurgy and Material Forming · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Czech Technical University in Prague
Universiti Teknologi PETRONAS
Taif University
NED University of Engineering and Technology
Coventry University
Funding
Taif University, Saudi Arabia
References (40)
Show source-provided references
1. 10.1016/j.engfailanal.2021.10596810.1016/j.engfailanal.2021.105968 ↗
2. Norton F. The creep of steels at high temperatures. Mc Graw Hill, New Y. 1929;1(1):90.
3. 10.1115/1.284211110.1115/1.2842111 ↗
4. 10.1007/BF0302725510.1007/BF03027255 ↗
5. 10.1115/1.55618410.1115/1.556184 ↗
6. 10.1023/A:101867102200810.1023/A:1018671022008 ↗
7. 10.1115/IMECE2012-8838910.1115/IMECE2012-88389 ↗
8. 10.1177/105678951143051910.1177/1056789511430519 ↗
9. Chang Y, Xu H. The damage development and failure description under multiaxial creep. In Proceedings of the ASME 2014 Pressure Vessels and Piping Conference, Anaheim, CA, USA, 20-24. July 2014: pp 1–6.
10. 10.1115/1.55618510.1115/1.556185 ↗
11. 10.1007/BF0278241410.1007/BF02782414 ↗
12. 10.3390/ma705337110.3390/ma7053371 ↗
13. 10.1115/GT2013-9600810.1115/GT2013-96008 ↗
14. Stewart CM, Gordon AP. Analytical Method to determine the Tertiary Creep Damage constants of the Kachanov-Rabotnov Constitutive Model. ASME, Int Mech Engineering Congress & Exposition IMECE2010-39153. 2010:pp 1–8.
15. 10.1115/1.400311110.1115/1.4003111 ↗
16. 10.3390/met1311185410.3390/met13111854 ↗
17. ABAQUS Version 6.12. User’s documentation 3.4.6. Dassault Systemes: Waltham MA USA. 2013;Volume IV
18. Sattar M, Othman AR, Othman MF, et al. Regression Analysis of Omega Model to Norton- Bailey Law for Creep Prediction in fitness for service assessment of steel material. Solid State Technol. 2020 Vol. 63 1s pp 1228–1239.
19. Booker MK. Use of Generalized Regression Models for the analysis of stress-rupture data Oak Ridge National Laboratory Oak Ridge Tennessee 37830 USA. 1978:pp 459–499.
20. 10.1016/j.msea.2017.11.06110.1016/j.msea.2017.11.061 ↗
21. 10.4028/www.scientific.net/SSP.324.18810.4028/www.scientific.net/SSP.324.188 ↗
22. 10.1016/j.engfailanal.2008.08.00510.1016/j.engfailanal.2008.08.005 ↗
23. Kwon O, Thomas C, Knowles D, et al. Remnant life assessment of platformer Heater T9 tubes using API 579 omega method. In: Volume 9: Eighth International Conference on Creep and Fatigue at Elevated Temperatures, Proceedings of the ASME 2007 Pressure Vessels and Piping Conference; San Antonio, (TX), USA, (NY), NY (USA). ASME; 2007 July 22–26. p. 389–397.
24. ASME. American petroleum institute API-579, fitness for service, operation manual. 3rd ed. Washington (DC) (USA): The American Society of Mechanical Engineers; 2016.
25. 10.1016/B978-032303506-4.10361-X10.1016/B978-032303506-4.10361-X ↗
26. 10.11113/jt.v78.914610.11113/jt.v78.9146 ↗
27. Powers LM Arnold SM Baranski A. Using ABAQUS scripting interface for materials evaluation and life prediction NASA Glenn Research Center Cleveland Ohio 44135 USA. 2006:pp 1–11. ABAQUS Users’ Conf.
28. 10.1115/1.135753810.1115/1.1357538 ↗
29. 10.1051/matecconf/20171230001910.1051/matecconf/201712300019 ↗
30. 10.3390/PR804047310.3390/PR8040473 ↗
31. 10.1016/j.jmrt.2020.09.08710.1016/j.jmrt.2020.09.087 ↗
32. 10.18180/tecciencia.2022.33.510.18180/tecciencia.2022.33.5 ↗
33. 10.3390/met1302019710.3390/met13020197 ↗
34. 10.3390/ma1419551810.3390/ma14195518 ↗
35. 10.1177/105678952093962210.1177/1056789520939622 ↗
36. 10.1016/j.msea.2008.06.05210.1016/j.msea.2008.06.052 ↗
37. 10.1016/j.jclepro.2018.05.15810.1016/j.jclepro.2018.05.158 ↗
38. 10.1038/s41598-019-54902-810.1038/s41598-019-54902-8 ↗
39. 10.3390/su1309460610.3390/su13094606 ↗
40. 10.1016/j.conbuildmat.2020.12070110.1016/j.conbuildmat.2020.120701 ↗