journal article·2019-05-04

Creep behaviour of AISI 316H stainless steel under stress-varying creep loading conditions: primary creep regeneration

X. Li, S. R. Holdsworth, E. Mazza, E. Hosseini

Materials at High Temperatures· Volume 36· Issue 3
Publisher page

Abstract

Primary creep regeneration (PCR) is an important reported observation from creep under stress-varying conditions for several alloys. For a specimen deforming in the secondary creep regime, a stress reversal leads to an enhanced creep rate upon reloading due to reactivation of the primary creep regime (i.e. PCR). This paper focuses on an investigation of the PCR phenomenon during stress-varying creep loading for AISI 316H stainless steel at 650°C. The experimental observations clarify the influence of different parameters (e.g. forward creep stress level, reverse stress magnitude and forward and reverse accumulated inelastic strain) on the extent of PCR activation. In addition, a correlation between the extent of PCR activation and inelastic strain accumulation during the reverse loading period was found, which was employed to develop an empirical–phenomenological model for prediction of the creep behaviour of the alloy after stress transients (e.g. stress reversals).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Empa, Swiss Federal Laboratories for Material Science and Technology, Dübendorf, Switzerland

ETH Zurich, Department of Mechanical and Process Engineering, Institute for Mechanical Systems, Zürich, Switzerland

Inspire Centre for Mechanical Integrity, c/o Empa, Dübendorf, Switzerland

Funding

SNSF, Swiss National Science Foundation

References (37)

Show source-provided references
1. Norton FH. · 1929
2. Evans RW · 1985
3. Ion J. The modelling of creep for engineering design. 1986. (NPL Report).
4. 10.1007/978-3-540-70839-110.1007/978-3-540-70839-1 ↗
5. 10.1533/978184569401210.1533/9781845694012 ↗
6. Kassner ME · 2015
7. 10.1115/1.289429610.1115/1.2894296 ↗
8. 10.1016/S0029-5493(99)00038-210.1016/S0029-5493(99)00038-2 ↗
9. 10.1007/s11661-007-9256-910.1007/s11661-007-9256-9 ↗
10. Bonora N, Esposito L. Transient creep modeling based on the dependence of the activation energy on the internal stress. In: Convegno Nazionale IGF XXI, Cassino (FR), Italia, 13-15 Giugno 2011, 120 -125.
11. 10.1115/1.400685610.1115/1.4006856 ↗
12. Parinov IA · 2013
13. 10.1098/rspa.1952.010710.1098/rspa.1952.0107 ↗
14. 10.1098/rspa.1960.002110.1098/rspa.1960.0021 ↗
15. 10.1098/rspa.1963.003010.1098/rspa.1963.0030 ↗
16. 10.1016/j.msea.2004.03.09810.1016/j.msea.2004.03.098 ↗
17. Sonnerup L · 1965
18. 10.1115/1.315378610.1115/1.3153786 ↗
20. 10.1115/1.316208410.1115/1.3162084 ↗
21. 10.1115/1.316709410.1115/1.3167094 ↗
22. 10.1115/1.316709510.1115/1.3167095 ↗
23. 10.1115/1.322584810.1115/1.3225848 ↗
24. Rees D · Engineering Integrity · 2008 · 25 · 15
25. 10.1520/JTE1189610.1520/JTE11896 ↗
26. 10.3184/096034013X1362574794000610.3184/096034013X13625747940006 ↗
27. Hosseini E · Mater High Temp · 2017 · 1
28. 10.1179/1743280414Y.000000004110.1179/1743280414Y.0000000041 ↗
29. 10.1016/j.msea.2013.08.05310.1016/j.msea.2013.08.053 ↗
30. 10.1016/j.actamat.2013.12.02710.1016/j.actamat.2013.12.027 ↗
31. 10.1007/s10853-015-9128-410.1007/s10853-015-9128-4 ↗
32. 10.1016/j.actamat.2012.08.06010.1016/j.actamat.2012.08.060 ↗
33. 10.1007/BF0054469310.1007/BF00544693 ↗
34. 10.1016/0025-5416(75)90159-710.1016/0025-5416(75)90159-7 ↗
35. Orowan E · Internal Stresses Fatigue Metals · 1959 · 59
36. 10.1016/j.actamat.2014.11.02110.1016/j.actamat.2014.11.021 ↗
37. 10.1002/pamm.20081020710.1002/pamm.200810207 ↗