journal article·2019-01-02

Rejuvenation of the microstructure and mechanical properties of a service-exposed IN939 superalloy by heat treatments

M. Abedini, M. R. Jahangiri, P. Karimi

Materials at High Temperatures· Volume 36· Issue 1
Publisher page

Abstract

Effect of heat treatment on the recovery of microstructure and mechanical properties of a service-exposed IN939 superalloy was studied. Four-stage heat treatment was performed on the service-exposed alloy. The microstructures of the service-exposed and rejuvenated alloys were examined by optical and scanning electron microscopes. The hardness, tension, and stress-rupture tests were carried out to characterise the mechanical properties. The results showed that the heat treatment could rejuvenate the microstructure of the alloy that was deteriorated during the service at high temperatures. Decomposed MC carbides were transformed to new fine carbides, continuous M23C6 carbides were dissolved and new discontinuous carbides along the grain boundaries were regenerated and, finally, the fine γ׳ particles were reformed. The microstructural recovery resulted in an increase in the hardness and ultimate tensile strength of the alloy. The results also showed that the creep behavior of the alloy at a testing temperature of 850°C could be improved by the heat treatment.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgy and Materials Engineering, University of Kashan , Kashan, Iran

Metallurgy Department, Niroo Research Institute , Tehran, Iran

Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign , Urbana, IL, USA

References (28)

Show source-provided references
1. 10.4028/www.scientific.net/SSP.124-12610.4028/www.scientific.net/SSP.124-126 ↗
2. Evans ND · 2005 · 809
3. 10.1023/A:101869471675610.1023/A:1018694716756 ↗
4. 10.1016/j.msea.2006.12.10710.1016/j.msea.2006.12.107 ↗
5. 10.1016/j.matdes.2014.08.03510.1016/j.matdes.2014.08.035 ↗
6. 10.1007/s11661-004-0076-x10.1007/s11661-004-0076-x ↗
7. 10.1361/10599490177034501510.1361/105994901770345015 ↗
8. 10.1016/S0261-3069(03)00061-X10.1016/S0261-3069(03)00061-X ↗
9. 10.1016/j.msea.2007.07.05510.1016/j.msea.2007.07.055 ↗
10. 10.3184/096034007X26357810.3184/096034007X263578 ↗
11. 10.1080/02619180.1986.1175331310.1080/02619180.1986.11753313 ↗
12. 10.1016/S1006-706X(08)60049-710.1016/S1006-706X(08)60049-7 ↗
13. 10.1080/09603409.2016.117675310.1080/09603409.2016.1176753 ↗
14. 10.1080/02619180.1984.1175323610.1080/02619180.1984.11753236 ↗
15. 10.1016/j.jallcom.2011.09.09410.1016/j.jallcom.2011.09.094 ↗
16. Koul A · Proceedings of the 6th international symposium on superalloys, high temperature alloys committee of the metallurgical society of AIME · 1988 · 755
17. Wangyao P · Chiang Mai J Sci · 2009 · 36 · 287
18. Wangyao P · JOM · 2017 · 6 · 55
19. 10.3184/096034011X1319812696738210.3184/096034011X13198126967382 ↗
20. 10.1179/mst.1987.3.4.26810.1179/mst.1987.3.4.268 ↗
21. 10.1179/mst.1986.2.10.103110.1179/mst.1986.2.10.1031 ↗
22. 10.1007/BF0264554710.1007/BF02645547 ↗
23. Goodhew PJ · 2001
24. 10.1007/978-94-009-7907-9_1510.1007/978-94-009-7907-9_15 ↗
25. 10.1016/0042-207X(92)90115-D10.1016/0042-207X(92)90115-D ↗
26. Dieter GE · 1986
27. 10.1007/BF0264520810.1007/BF02645208 ↗
28. 10.2514/1.1823910.2514/1.18239 ↗