Effect of section thickness on creep and stress rupture behaviour of DS CM247 nickel base superalloy
Source abstract
Abstract
The effect of section thickness on creep and stress rupture behaviour of DS CM247 nickel base superalloy at three temperatures viz. 760, 982 and 1038°C, has been investigated in an effort to identify the factors contributing to the observed creep/stress rupture behaviour. Irrespective of section thickness, the shape of creep curves at the lowest temperature of 760°C differs from the shape of those at the higher temperatures, showing significantly higher primary creep strain (PCS). At higher temperatures the creep curves exhibit limited primary and secondary regimes, but predominant tertiary regime. Such a difference in shapes of the creep curves is related to the difference in dislocation bypass mechanisms operating at these temperatures. The variation of minimum creep rate (MCR) and time to rupture (tf) with section size indicates a progressive creep strengthening at 760 and 982°C, while a progressive creep weakening at 1038°C with decreasing specimen thickness. Such a behaviour can be explained in terms of relative extents of the surface oxide layer (contributing to creep strengthening) and γ′ depleted zone (causing creep weakening) formed at these temperatures. Further, the creep strengthening at 760 and 982°C as well as weakening at 1038°C is more pronounced for the thinner specimens.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
aDefence Metallurgical Research LaboratoryKanchanbagh, Hyderabad-500058, India
bGas Turbine Research Establishment, C. V. Raman Nagar, Bangalore-560093, India
References (15)
Show source-provided references
1. Khan, T., Caron. P. and Nakagawa, Y. G. (1986) J Metall., 16.
2. Richards, E. G. (1968) J Inst. Metals, 95, 365.
3. Oxx, G. D. (1974) Int. Conf. Creep Fatigue at Elevated Temperature Applications, Inst. of Mech. Eng., paper 212.
4. Gibbons, T. B. (1981) Met. Technol., 8, 472.
5. 10.1023/A:100677941049410.1023/A:1006779410494 ↗
6. Pandey, M. C., Taplin, D. M. R. and Rama Rao, P. (1989) Mater Sci. Engng., A118, 33.
7. Pandey, M. C. and Taplin, D. M. R. (1994) Scripta. Met. Mater., 31, 719.
8. Baldan A. (1997) 1 Mater. Sci. 32 35.10.1023/A:1018506628065 ↗
9. Doner, M. and Heckler, J. A. (1988) In: Reichman, S., Duhl, D. N., Maurer, G., Antolovich, S. and Lund, C. (eds.), Super-alloys 1988, p. 653. The Metallurgical Society.
10. Fourie, J. T. and Baldan, A. (1992) In: Antolovich, S. D., Stusrud, R. W., Mackay, RA., Anton, D. L., Khan, T., Kissinger, R. D. and Klarstrom, D. L. (eds.), Superalloys 1992, p. 619. The Minerals, Metals and Materials Society.
11. Leverant, G. R. and Duhl, D. N. (1971) Met. Trans., 2, 907.
12. Leverant, G. R. and Kear, B. H. (1970) Met. Trans., 1, 491.
13. Dongliang, L., (Lin, T. L.) and Deliang, Y. (1979) Acta. Metall. Sinica, 15, 177.
14. Dongliang L. (Lin T. L.) (1981) Acta. Metall. Sinica 17 26.
15. Dongliang, L., Lin, T. L., Deliang, Y. and Sun Chuanqi. (1984) In: M. Gell et al,. (eds.), Proc. 5th Int. Symp. on Superalloys, p. 199. AIME, New York.