Corrosion fatigue of alloy 625 weld claddings in combustion environments
Source abstract
Abstract
Alloy 625 weld clad boiler tubes retrieved from two supercritical pulverized coal-fired utility boilers after less than 24 months service were extensively cracked. Most of the cracks tapered towards a single crack tip whereas some cracks branched at the crack front. Corrosion products in the cracks consisted of a primary phase and a secondary phase or “spine”. The chemistry of the corrosion products was complex. The primary phase was considered a Cr-based oxide or oxide–sulfide phase mixture whereas the composition of the secondary phase was considered a nickel-based sulfide. The cause of the cracking was attributed to corrosion-fatigue. Corrosion was attributed to traditional oxidation and sulfidation mechanisms commonly found in combustion environments. Sources of thermal fatigue stress and stress concentrators were identified. In the dendritic weld microstiucture, dendrite cores depleted in Mo and Nb were susceptible to preferential oxidation–sulfidation. Cracks initiated at these areas and propagated the farthest in the valley of weld ripples following the main axis of the columnar dendrite cores. To explain the corrosion morphology within the cracks, a mechanism was proposed based on fatigue cracking of layered multiphasic corrosion scales formed on a compositionally segregated weld microstructure.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Workshop on Materials Issues Associated with Low-NOx Combustion in Fossil-fired Boilers, In: 10th Ann. Conf. on Fossil Energy Mat.: Adv. Res. and Tech. Dev., U. S. Dept. of Energy, Office of Fossil Energy Washington, D. C. (1996) [Knoxville, TN, USA May 1996]
2. Jones, C. Power 28 (Jan./Feb.), 54–60 (1997).
3. Smith G. D. · Mat. Peif · 1989 · 28 · 41
4. Yeager M. · 1997
5. Lamping G. A. · 1985
6. Cialone, H. J., Wright, I. G. and Wood, R. A. Circumferential Cracking of Supercritical Boiler Waterwall Tubes, Electric Power Research Institute: Palo Alto, CA (1986).
7. Corrosion Fatigue Boiler Tube Failures in Waterwalls and Economizers: Volumes 1-4, Report TR-100455, Electric Power Research Institute: Palo Alto, CA, 1992.
8. Newton J. D. · 1977 · 369
9. 10.1115/1.290417210.1115/1.2904172 ↗
10. 10.5006/1.331591410.5006/1.3315914 ↗
11. Wright, I. G., Anson, D., Cialone, H. J., Davis, G. O., Kurre, M. D. and Stulen, F. B. Root Cause of Circumferential Cracking in the Waterwalls of Supercritical Boilers. In: International Conference on Boiler Tube Failures in Fossil Plants, Electric Power Research Institute Palo Alto, CA (1991).
12. French D. N. · 1988
13. 10.1016/S0921-5093(97)00089-010.1016/S0921-5093(97)00089-0 ↗
14. 10.1007/BF0259545210.1007/BF02595452 ↗
15. Cieslak, M. J. Weld. Res. (Feb.), 49–56(1991).10.1007/BF02662801 ↗
16. Goldstein J. I. · 1984
17. 10.1007/BF0264505610.1007/BF02645056 ↗
18. Floreen S. · Superalloys · 1994 · 718
19. 10.1007/BF0267062110.1007/BF02670621 ↗
20. 10.1007/BF0075179510.1007/BF00751795 ↗
21. 10.1007/BF0074026010.1007/BF00740260 ↗
22. 10.1007/BF0267082610.1007/BF02670826 ↗
23. Guttmann V. · Mater. High Temp · 1997 · 14 · 12710.1080/09603409.1997.11689537 ↗
24. Savage W. F. · 1976
25. Gooch, T. G. Weld. Res May, 135S–154S (1996).
26. 10.5006/0010-9312-35.3.10810.5006/0010-9312-35.3.108 ↗
27. Stott F. H. · Mater. High Temp · 1997 · 14 · 10910.1080/09603409.1997.11689535 ↗
28. 10.1007/BF0066479810.1007/BF00664798 ↗
29. 10.1007/BF0066662810.1007/BF00666628 ↗
30. 10.1007/BF0066519010.1007/BF00665190 ↗
31. 10.1016/0010-938X(94)90177-510.1016/0010-938X(94)90177-5 ↗
32. 10.1016/0010-938X(94)00128-S10.1016/0010-938X(94)00128-S ↗
33. 10.1007/BF0060360910.1007/BF00603609 ↗
34. 10.1007/BF0104682710.1007/BF01046827 ↗
35. 10.1007/BF0265853010.1007/BF02658530 ↗
36. 10.1007/BF0065924810.1007/BF00659248 ↗
37. 10.1016/S0010-938X(66)80025-210.1016/S0010-938X(66)80025-2 ↗
38. Hancock, P. The Corrosion of Nickel-Chromium Alloys in Sulfur-containing Atmospheres at High Temperatures. In: First Int. Congress on Met. Corr, Butterworths, London, p. 193 (1961)
39. Lewis, H. and Whittle, J. E. Corrosion of nickel-chromium alloys by sulfur dioxide at 600-900°C. In: 4th Proc. Int. Congr. Metal. Corros. NACE Int. Houston, TX (1972).
40. 10.1016/S0010-938X(75)80024-210.1016/S0010-938X(75)80024-2 ↗
41. 10.1016/0010-938X(76)90113-X10.1016/0010-938X(76)90113-X ↗
42. 10.1016/0010-938X(76)90114-110.1016/0010-938X(76)90114-1 ↗
43. 10.1016/0010-938X(84)90061-110.1016/0010-938X(84)90061-1 ↗
44. Chang K. M. · J. Met · 1990 · 42 · 29
45. Raj, R. Flow and Fracture at Elevated Temperatures, ASM: Materials Park, OH (1985).
46. Coffin, L. F. Damage Processes in Time-dependent Fatigue — a Review. In: Creep-Fatigue-Environment Interactions, Pelloux, R. Stoloff, N. S., Eds.; TMS: Warrendale, PA (1980).
47. Cook, R. H. and Skelton, R. P. Int. Met. Rev., 19 (Dec.), 199-222 (1974).10.1179/095066074790136971 ↗
48. Ellison, E. G. Combined Creep-Fatigue-Environment Cracking. In: Subcritical Crack Growth Due to Fatigue, Stress-Corrosion, and Creep, p. 5331. Elsevier: NY, 1981.
49. Pineau A · 1983 · p. 305
50. 10.1179/mst.1987.3.9.71610.1179/mst.1987.3.9.716 ↗
51. 10.1179/mst.1987.3.9.76510.1179/mst.1987.3.9.765 ↗
52. Plumbridge, W. J. Metallography of High Temperature Fatigue. In: High Temperature Fatigue : Properties and Prediction, pp. 177-228. Skelton, R. P., Ed.; Elsevier: New York (1987).10.1007/978-94-009-3453-5_4 ↗
53. 10.1007/BF0281171010.1007/BF02811710 ↗
54. 10.1007/BF0264242610.1007/BF02642426 ↗
55. 10.1016/0010-938X(84)90051-910.1016/0010-938X(84)90051-9 ↗