journal article·2022-01-02

An interpretation of creep rupture properties of grade 91 steel service- exposed for 100,000 hours at 600 °C

K. Maruyama, M. Yaguchi, Y. Minami, K. Tamura, K. Yoshimi

Materials at High Temperatures· Volume 39· Issue 1
Publisher page

Abstract

Creep rupture data of grade 91 steel used as hot reheat pipes have been reported recently. The data are investigated by comparison with the creep rupture database of the steel in normalised and tempered (NT) states. Four regions H, M, L and G with different values of stress exponent appear in creep of grade 91 steel. The pipes were used in long-term region G (around 600 °C for 100,000 hours) in fossil-fired power plants. Medium- and low-stress regions M and L are confirmed to exist in the service-exposed states. Stress exponents in the two regions are kept unchanged in all the pipes, but the service exposure reduces their remaining creep rupture lives. The reduction is significant in the pipes made by cold bending. The service exposure retards the appearance of long-term region G. Causes of these findings are discussed in this paper.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fire effects on concrete materials · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science, Graduate School of Engineering, Tohoku University, Sendai, Japan

Materials Science Division, Energy Transformation Research Laboratory, Central Research Institute of Electric Power Industry, Yokosuka, Japan

References (33)

Show source-provided references
1. Electric Power Research Institute, “The benefits of improved control of composition of creep-strength-enhanced ferritic steel grade 91,” EPRI Report No. 3002003472, Electric Power Research Institute, Palo Alto, CA, 2014.
2. Yaguchi M. · Bull Iron Steel Inst Japan · 2019 · 24 · 68
3. Nonaka I · 2005 · 847
4. 10.1016/j.msea.2006.11.01910.1016/j.msea.2006.11.019 ↗
5. 10.1016/j.ijpvp.2009.04.00510.1016/j.ijpvp.2009.04.005 ↗
6. 10.1016/j.msea.2012.10.03910.1016/j.msea.2012.10.039 ↗
7. 10.1016/j.ijpvp.2017.03.00210.1016/j.ijpvp.2017.03.002 ↗
8. 10.31399/asm.tb.dmlahtc.t6049005910.31399/asm.tb.dmlahtc.t60490059 ↗
9. 10.2355/tetsutohagane1955.85.11_84110.2355/tetsutohagane1955.85.11_841 ↗
10. 10.1016/j.ijpvp.2007.06.01010.1016/j.ijpvp.2007.06.010 ↗
11. 10.1016/j.msea.2011.02.06010.1016/j.msea.2011.02.060 ↗
12. 10.1016/j.jnucmat.2012.09.02610.1016/j.jnucmat.2012.09.026 ↗
13. 10.1016/j.msea.2013.12.08810.1016/j.msea.2013.12.088 ↗
14. 10.1016/j.actamat.2017.03.04510.1016/j.actamat.2017.03.045 ↗
15. Yamamoto Y · CAMP-ISIJ · 2017 · 30 · 913
16. 10.1016/j.ijpvp.2020.10413110.1016/j.ijpvp.2020.104131 ↗
17. 10.1016/j.msea.2008.04.13310.1016/j.msea.2008.04.133 ↗
18. 10.1016/j.ijpvp.2010.03.01710.1016/j.ijpvp.2010.03.017 ↗
19. Yaguchi M · 2019 · 51
20. 10.1115/1.404744210.1115/1.4047442 ↗
21. Maruyama K, Dewees D, Abe F, et al. “Multi-region modeling of multi-heat creep data of grade 91 steel for prediction of long-term creep rupture life”, submitted for publication.
22. Kako K · 2017 · 52
23. 10.1016/j.msea.2017.04.05010.1016/j.msea.2017.04.050 ↗
24. 10.1016/j.msea.2019.02.00310.1016/j.msea.2019.02.003 ↗
25. 10.1533/9781845694012.2.35010.1533/9781845694012.2.350 ↗
26. National Institute for Materials Science · 2014
27. National Research Institute for Metals · 1997
28. 10.1533/9781845694012.2.24110.1533/9781845694012.2.241 ↗
29. Kato S, Furukawa T, Yoshida E. Material test data of Mod. 9Cr-1Mo Steel (1). JAEA-Data/Code 2008-030, Japan Atomic Energy Agency, Tokai-mura, Japan, 2009.
30. Swindeman RW, Swindeman MJ, Roberts BW, et al. “Verification of allowable stresses in ASME Section III subsection NH for Grade 91 Steel,” ASME ST LLC Report, STP-NU-019-1, ASME Standards Technology, LLC, New York, 2009.10.2172/974283 ↗
31. 10.1002/srin.19990563910.1002/srin.199905639 ↗
32. 10.2355/isijinternational.41.64110.2355/isijinternational.41.641 ↗
33. 10.1016/j.ijpvp.2021.10431210.1016/j.ijpvp.2021.104312 ↗