Serrated yielding in austenitic stainless steels
Source abstract
Abstract
Austenitic stainless steels are widely employed in various applications due to many desirable properties such as excellent mechanical properties and corrosion/oxidation resistance. Serrated yielding phenomenon that occurs in austenitic stainless steels during deformation can cause significant changes in microstructures and mechanical properties. Thus, understanding the serrated yielding mechanisms and their influence on the mechanical behaviour on austenitic stainless steels is essential for developing and designing an advanced steel for harsher environment applications. In this article, a concise review of serrated yielding behaviour is examined and discussed with special attention to serration types, models describing the origin of the serrated flow, temperature-strain rate regimes for the serration occurrence, recent findings of the serration behaviour in a variety of austenitic steels and the role of dynamic strain ageing. Contradiction about the negative/beneficial impact of serrated flow on mechanical properties of newly developed austenitic stainless steels also is presented.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
King Abdulaziz City for Science and Technology
References (100+)
Show source-provided references
1. Portevin A, LeChatelier F. Heat treament of aluminum-coopper alloys. Trans Am Soc Steel Treat. 1924;530:457–478.
2. 10.1016/j.mser.2009.03.00110.1016/j.mser.2009.03.001 ↗
3. Monteiro SN Pereira AC Braga FDO et al. Relevance of Dynamic Strain Aging under Quasi-Static Tension on AISI 304 Stainless Steel Materials Research (2017) 421–425.10.1590/1980-5373-mr-2016-0910 ↗
4. Alomari AS Kumar N Murty KL Enhanced ductility in dynamic strain aging regime in a Fe-25Ni-20Cr austenitic stainless steel Materials Science and Engineering. (2018) 157–160.10.1016/j.msea.2018.05.060 ↗
5. 10.3390/met1008110110.3390/met10081101 ↗
6. Rodriguez P. Dynamic Strain Ageing: is it really a damage mechanism? In: Raj B, Rao KBS, Jayakumar T, et al., editors. Proceeding of International Symposium on Materials Ageing and Life Management. Kalpakkam, India: Allied Publishers Limited; 2000. p. K1–K14.
7. Shipley WTBARJ. ASM Handbook Volume 11: failure Analysis and Prevention. ASM International; 2002.
8. 10.1016/j.jnucmat.2008.08.04410.1016/j.jnucmat.2008.08.044 ↗
9. Marshall P. Austenitic Stainless Steels: microstructure and mechanical properties. Elsevier Applied Science; 1984.
10. 10.1016/B978-0-08-056033-5.00019-710.1016/B978-0-08-056033-5.00019-7 ↗
11. 10.1179/02670830110150897210.1179/026708301101508972 ↗
12. 10.1016/0956-7151(91)90039-410.1016/0956-7151(91)90039-4 ↗
13. 10.1533/9781845694012.1.1510.1533/9781845694012.1.15 ↗
14. Beckitt FR Banks TM Gladman T Secondary creep deformation in 18%Cr-10%Ni steel Creep strength in steel and high temperature alloys The Metal Society London 1972 pp. 71–77.
15. 10.1007/s12666-010-0021-110.1007/s12666-010-0021-1 ↗
16. 10.1016/0921-5093(95)09991-310.1016/0921-5093(95)09991-3 ↗
17. Alden G Aronsson B Some observations on the influence of carbon and nitrogen on the creep befavior of AISI 316 type austentic stainless steels Creep strength in steel and high temperature alloys The Metal Society London 1972 pp. 67–70.
18. 10.1179/1878641314Y.000000002610.1179/1878641314Y.0000000026 ↗
19. Admason JM Martin JW Effect of niobium content on the steady state creep of stabilized 20%Cr-25%Ni austenitic stainless steels Creep strength in steel and high temperature alloys The Metal Society London 1972 pp. 99–105.
20. 10.1016/j.jnucmat.2010.12.24010.1016/j.jnucmat.2010.12.240 ↗
21. 10.1016/j.msea.2011.02.02510.1016/j.msea.2011.02.025 ↗
22. 10.31399/asm.tb.ssde.978162708286010.31399/asm.tb.ssde.9781627082860 ↗
23. Nandedkar RV Kesternich W Effect of boron on high-temperature creep behavior of austenitic stainless steel DIN 1.4970 Metallurgical Transactions A 21 (12) (1990) 3033–3038.10.1007/BF02647301 ↗
24. 10.1016/j.ijpvp.2006.09.01410.1016/j.ijpvp.2006.09.014 ↗
25. 10.1557/jmr.2015.34310.1557/jmr.2015.343 ↗
26. 10.2355/isijinternational.42.32510.2355/isijinternational.42.325 ↗
27. 10.1016/j.msea.2010.03.08910.1016/j.msea.2010.03.089 ↗
28. 10.1007/s11661-010-0321-410.1007/s11661-010-0321-4 ↗
29. Sourmail T Bhadeshia HKDH Microstructural evolution in two variants of NF709 at 1023 and 1073 K Metallurgical and Materials Transactions: (2005) 23–34.10.1007/s11661-005-0135-y ↗
30. 10.1007/BF0274399310.1007/BF02743993 ↗
31. 10.1088/0959-5309/52/1/30310.1088/0959-5309/52/1/303 ↗
32. 10.1080/1478643720822889910.1080/14786437208228899 ↗
33. 10.1016/0001-6160(74)90171-010.1016/0001-6160(74)90171-0 ↗
34. Yuan L Hu R Li J et al. Portevin-Le Chatelier effect in a Ni–Cr–Mo alloy containing ordered phase with Pt2Mo-type structure at room temperature Materials Science and Engineering: (2016) 317–322.10.1016/j.msea.2015.10.070 ↗
35. 10.1016/0001-6160(65)90136-710.1016/0001-6160(65)90136-7 ↗
36. 10.2355/isijinternational.ISIJINT-2015-07010.2355/isijinternational.ISIJINT-2015-070 ↗
37. 10.1007/BF0274399910.1007/BF02743999 ↗
38. 10.1007/BF0303841410.1007/BF03038414 ↗
39. 10.1016/0001-6160(82)90218-810.1016/0001-6160(82)90218-8 ↗
40. 10.4028/www.scientific.net/SSP.42-43.25710.4028/www.scientific.net/SSP.42-43.257 ↗
41. 10.1016/j.jnucmat.2008.08.00810.1016/j.jnucmat.2008.08.008 ↗
42. 10.1016/0025-5416(81)90099-910.1016/0025-5416(81)90099-9 ↗
43. 10.1179/imr.1994.39.3.11310.1179/imr.1994.39.3.113 ↗
44. 10.1088/0370-1298/62/1/30810.1088/0370-1298/62/1/308 ↗
45. 10.1080/1478644080852034710.1080/14786440808520347 ↗
46. 10.1119/1.193370410.1119/1.1933704 ↗
47. Ham RK, Jaffrey D. Dislocation multiplication, vacancy accumulation, and the onset of jerky flow during forward and reverse 1 strain in Cu-3.2 at. % Sn, The Philosophical Magazine. J Theor Exp Appl Phys. 1967;15(134):247–256.
48. 10.1007/s11661-998-0168-010.1007/s11661-998-0168-0 ↗
49. 10.1016/0001-6160(72)90028-410.1016/0001-6160(72)90028-4 ↗
50. 10.1016/0001-6160(80)90114-510.1016/0001-6160(80)90114-5 ↗
51. 10.1002/pssa.221030012010.1002/pssa.2210300120 ↗
52. Kubin LP, Estrin Y. Dynamic strain ageing and the mechanical response of alloys. J Phys. 1991;1(6):929–943.
53. 10.1016/j.actamat.2012.08.03510.1016/j.actamat.2012.08.035 ↗
54. 10.1016/j.actamat.2015.03.02710.1016/j.actamat.2015.03.027 ↗
55. 10.1016/j.actamat.2004.03.04210.1016/j.actamat.2004.03.042 ↗
56. 10.1038/nmat176510.1038/nmat1765 ↗
57. 10.1016/0956-7151(92)90406-510.1016/0956-7151(92)90406-5 ↗
58. Alomari AS Kumar N Murty KL Serrated yielding in an advanced stainless steel Fe-25Ni-20Cr (wt%) Materials Science and Engineering: (2019) 292–302.10.1016/j.msea.2019.02.023 ↗
59. Choudhary BK Activation energy for serrated flow in type 316L(N) austenitic stainless steel Materials Science and Engineering: (2014) 160–168.10.1016/j.msea.2014.02.083 ↗
60. 10.1016/j.jnucmat.2009.08.00210.1016/j.jnucmat.2009.08.002 ↗
61. 10.1016/0025-5416(84)90112-510.1016/0025-5416(84)90112-5 ↗
62. 10.1016/0013-7944(88)90193-210.1016/0013-7944(88)90193-2 ↗
63. 10.1016/0022-3115(83)90117-410.1016/0022-3115(83)90117-4 ↗
64. Choudhary BK Influence of Strain Rate and Temperature on Tensile Deformation and Fracture Behavior of Type 316L(N) Austenitic Stainless Steel Metallurgical and Materials Transactions: (2014) 302–316.10.1007/s11661-013-1978-2 ↗
65. Bouchaud E Kubin L Octor H Ductility and dynamic strain aging in rapidly solidified aluminum alloys Metallurgical Transactions: (1991) 1021–1028.10.1007/BF02661095 ↗
66. Doner M Conrad H Deformation mechanisms in commercial Ti (0.5 at. pct oineq) at intermediate and high temperatures (0.3–0.6 tinm) Metallurgical Transactions (1973) 2809–2817.10.1007/BF02644581 ↗
67. Gupta C Chakravartty JK Wadekar SL et al. Effect of serrated flow on deformation behaviour of AISI 403stainless steel Materials Science and Engineering: (2000) 49–55.10.1016/S0921-5093(00)00992-8 ↗
68. 10.1016/0001-6160(73)90168-510.1016/0001-6160(73)90168-5 ↗
69. 10.1016/j.jnucmat.2006.03.01610.1016/j.jnucmat.2006.03.016 ↗
70. Xiong X Quan D Dai P et al. Tensile behavior of nickel-base single-crystal superalloy DD6 Materials Science and Engineering: (2015) 608–612.10.1016/j.msea.2015.03.125 ↗
71. 10.1016/0001-6160(70)90147-110.1016/0001-6160(70)90147-1 ↗
72. 10.1520/JTE12495J10.1520/JTE12495J ↗
73. Srinivas M, Malakondaiah G, Murty KL, et al. Fracture Toughness in the Dynamic Strain Ageing Regime. Scr Metall Mater. 1991;25(11):2585–2588.10.1016/0956-716X(91)90073-A ↗
74. 10.1016/S0308-0161(99)00075-710.1016/S0308-0161(99)00075-7 ↗
75. 10.1016/S0308-0161(99)00033-210.1016/S0308-0161(99)00033-2 ↗
76. Verma P Sudhakar Rao G Chellapandi P et al. Dynamic strain ageing deformation and fracture behavior of modified 9Cr–1Mo steel Materials Science and Engineering: (2015) 39–51.10.1016/j.msea.2014.10.011 ↗
77. 10.1007/BF0264451210.1007/BF02644512 ↗
78. 10.1016/0025-5416(84)90143-510.1016/0025-5416(84)90143-5 ↗
79. 10.1007/BF0281171810.1007/BF02811718 ↗
80. 10.1007/BF0264835310.1007/BF02648353 ↗
81. 10.1016/0036-9748(73)90138-510.1016/0036-9748(73)90138-5 ↗
82. 10.1016/0025-5416(86)90105-910.1016/0025-5416(86)90105-9 ↗
83. 10.1007/BF0264668410.1007/BF02646684 ↗
84. 10.1016/S1359-6462(97)00282-010.1016/S1359-6462(97)00282-0 ↗
85. 10.1016/j.ijfatigue.2005.06.03710.1016/j.ijfatigue.2005.06.037 ↗
86. 10.1007/BF0055607310.1007/BF00556073 ↗
87. 10.1007/BF0264975210.1007/BF02649752 ↗
88. 10.1016/j.msea.2008.09.02510.1016/j.msea.2008.09.025 ↗
89. 10.3184/096034010X1292849731994910.3184/096034010X12928497319949 ↗
90. Murty KL, Hall EO. Dynamic Strain-Aging and Neutron Irradiation in Mild Steel in: irradiation Effects on the Microstructure and Properties of Metals. Astm Stp. 1976;611:53–71.
91. 10.1038/308051a010.1038/308051a0 ↗
92. 10.1016/S0022-3115(98)00766-110.1016/S0022-3115(98)00766-1 ↗
93. Murty KL Charit I An Introduction to Nuclear Materials: fundamentals and Applications Wiley-VCH 2013.
94. 10.1016/B978-1-4832-8423-1.50105-X10.1016/B978-1-4832-8423-1.50105-X ↗
95. 10.2172/438821010.2172/4388210 ↗
96. 10.1515/JMBM.1992.3.4.22510.1515/JMBM.1992.3.4.225 ↗
97. 10.1016/0001-6160(88)90331-810.1016/0001-6160(88)90331-8 ↗
98. 10.1038/s41467-018-04473-510.1038/s41467-018-04473-5 ↗
99. Hall EO Yield Point Phenomena in Metals and Alloys Macmillan 1970.10.1007/978-1-4684-1860-6 ↗
100. 10.1051/metal/19585504038310.1051/metal/195855040383 ↗