Validation of a Code of Practice for notched bar creep rupture testing: procedures and interpretation of data for design
Source abstract
Abstract
The results of a European collaborative project aimed at validating a Code of Practice for notched bar creep rupture testing and interpretation of results are presented. Several laboratories from different European Union member states were selected to undertake a comprehensive test programme using circumferentially double notched bars possessing a range of notch acuity ratios. The effects of notch spacing and specimen size were investigated. Inelastic finite element analysis was conducted for establishing the important stress components and stress ratios that are considered instrumental in determining the multiaxial stress rupture criterion (MSRC) for a given material and loading condition. The results of the work have validated the concepts and procedures recommended in the Code of Practice in terms of carrying out the tests and the simplified procedures for the interpretation of results. New finite element analysis has resulted in revised estimates of the multiaxial skeletal point stress components that enter the MSRC. The finite element work is supported by the experimental results in establishing the minimum notch spacing recommended for testing double notched bars. In addition, selected tests revealed the absence of any significant effect of specimen size on notched bar rupture life, thus supporting the use of miniature testpieces even when only a few grains span the minimum section across the notch throat region of the testpiece. The work is supplemented by metallographic examination of failed notched bars which is used to relate damage evolution to the stress distributions predicted by finite element analysis. The results demonstrate the usefulness of the approach recommended in the Code of Practice for establishing the MSRC. This has been borne out by a series of tests undertaken on three engineering materials possessing a wide range of uniaxial creep ductilities, and each displaying a different MSRC. These differences in multiaxial creep rupture behaviour have been attributed to the differences in uniaxial tertiary creep ductility and its variation with stress state.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Webster G.A. · 1992
2. BS 3500: 1969. Methods for Creep and Rupture Testing of Metals. (1981).
3. DIN 50119. Testing of Materials, Creep Test, Definitions, Symbols, Procedure, Evaluation. DIN Deutsches Institut fur Normung eV, Berlin, Germany (1952).
4. ASTM E 292-83.Standard Practice for Conducting Time-to-Rupture Notch Tension Tests of Materials. American Society for Testing and Materials, Philadelphia, USA.
5. 10.1016/0022-5096(72)90015-410.1016/0022-5096(72)90015-4 ↗
6. 10.1179/msc.1977.11.2.3710.1179/msc.1977.11.2.37 ↗
7. Lonsdale, D. and Flewitt, P.E.J. In: Haasen, P., Gerold, V and Kostorz, G. (eds)Strength of Metals and Alloys, p. 245. Pergamon Press, Aachen, (1978).
8. Cane B.J. · Int. Conf on Mechanical Behaviour of Materials · 1979 · 2 · p. 173
9. 10.1016/0020-7403(77)90073-X10.1016/0020-7403(77)90073-X ↗
10. Hayhurst D.R. · 1986
11. 10.1098/rspa.1993.006510.1098/rspa.1993.0065 ↗
12. 10.1243/03093247V17312310.1243/03093247V173123 ↗
13. 10.1007/978-94-011-2888-9_610.1007/978-94-011-2888-9_6 ↗
14. Loveday M.S · 1996 · pp. 277
15. BS PD 6461 Pt 3. Guide to the Expression of Uncertainty in Measurement. British Standards Institution (1995).
16. 10.1007/978-3-642-81598-0_2710.1007/978-3-642-81598-0_27 ↗
17. British Standards Institution · 1994
18. Goodall, I.W., Goodman, A.M., Chell, G.G., Ainsworth, R.A. and Williams J.A.An Assessment Procedure for the High Temperature Response of Structures- R5 Issue 1, Nuclear Electric (1990).