Advanced technology in creep life prediction and damage evaluation for creep strength enhanced ferritic steels
Source abstract
Abstract
Creep damage mechanisms of recently developed boiler and steam-turbine steels are not well clarified, however, creep life prediction technology for such creep strength enhanced ferritic steels, grades 91, 92 122, etc. with tempered martensitic structure including welds has been strongly demanded by power plant operators and equipment manufacturers. In this paper, the technologies related to the creep life prediction and damage evaluation for creep strength enhanced ferritic steels being studied from the various aspects in Japan will be surveyed and presented. The creep life prediction of this type of steel must be grounded on the findings on microstructural degradation and creep softening in martensitic structure composed of very fine martensite lath, block, packet and prior austenite grains, and precipitation and dislocation structures. Physical properties response to the creep degradation and measurement and detection of localized creep damage/strength would be useful tools to develop diagnostic techniques for life prediction of creep strength enhanced ferritic steels. Other important techniques to support the creep life prediction based on creep-strain/rupture data are creep modelling and data analysis which have been successfully investigated to date.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. 10.2355/isijinternational.41.61210.2355/isijinternational.41.612 ↗
2. Masuyama, E (2003) Creep rupture behavior and life assess-ment of advanced 9-12%Cr steel weldments for power appli-cations. Proc. 2nd Int. Conf on Integrity of High Temperature Welds, pp. 373-380. London, November 10-12, 2003.
3. Brinkman, C.R., Alexander, D.J. and Maziasz, P.J. (1990) Modified 9Cr-lMo steel for advanced steam generator appli-cations. ASME/IEEE Power Generation Conference, 90-JPGC/ NE-8.
4. Masuyama E · 1995 · pp. 98
5. Kimura, K., Kushima, H. and Sawada, K. (2003) Long-term creep prediction of high Cr ferritic creep resistant steels based on degradation mechanisms. Proc. 6th Int. Charles Parsons Turbine Conf., IOM.
6. Kimura K. · ASME PVP · 2004 · 476 · 11
7. Kimura K., Kushima H. and Abe E (2002) Degradation and assessment of long-term creep strength of high Cr ferritic creep resistant steels. Int. Conf. on Advances and Optimization of Fossil Power Plants, Orland, Florida, March 11-13, 2002.
8. Kimura, K. (2005) Assessment of long-term creep strength and review of allowable stress of high Cr creep resistant steels. Proc. of PVP2005, PVP2005-71039, Denver Colorado, July, 2005.10.1115/PVP2005-71039 ↗
9. Kimura, K. (2006) Creep strength assessment and review of allowable tensile stress of creep strength enhanced ferritic steels in Japan. Proc. of PVP2006-ICPVT-11, PVP2006-ICPVT-11-93294, Vancouver, Canada, July, 2006.10.1115/PVP2006-ICPVT-11-93294 ↗
10. Tabuchi, M. and Takahashi, Y. (2006) Evaluation of creep strength reduction factors for welded joints of modified 9Cr-1Mo steel (P91). Proc. of PVP2006-ICPVT-11, PVP2006-ICPVT-11-93294, Vancouver, Canada, July, 2006.10.1115/PVP2006-ICPVT-11-93350 ↗
11. Takahashi, Y. and Tabuchi, M. (2006) Evaluation of creep strength reduction factors for welded joints of HCM12A (P122). Proc. of PVP2006-ICPVT-11, PVP2006-ICPVT-11-93294, Vancouver, Canada, July, 2006.10.1115/PVP2006-ICPVT-11-93488 ↗
12. Yoshida, K., Nakai, H. and Fukuda, M. (2006) Regulatory review results on allowable tensile stress values of creep strength enhanced ferritic steels. Proc. of PVP2006-ICPVT-1 1, PVP2006 -ICPVT-11-93294, Vancouver, Canada, July, 2006.
13. Kimura, K., Sawada, K., Kubo, K. and Kushima, H. (2004) Influence of stress on degradation and life prediction of high strength ferritic steels. Proc. PVP2004, PVP, Vol. 476, pp. 11-18.10.1115/PVP2004-2566 ↗
14. Kimura, K., Kushima, H., Sawada, K. and Toda, Y. (2007) Region splitting analysis on creep strength enhanced ferritc steels. Proc. CREEP 8, CREEP2007-26406, pp. 647–654.
15. Kimura K. · 2007
16. 10.3139/146.10165110.3139/146.101651 ↗
17. Maruyama K. · Tetsu Hagane · 1994 · 80 · 33610.2355/tetsutohagane1955.80.4_336 ↗
18. 10.1016/j.ijpvp.2006.09.01510.1016/j.ijpvp.2006.09.015 ↗
19. Maruyama, K (2008) Fracture mechanism map and funda-mental aspects of creep fracture in creep-resistant steels, pp. 350-364. Woodhead Publishing, Cambridge, UK.10.1533/9781845694012.2.350 ↗
20. 10.1115/CREEP2007-2615010.1115/CREEP2007-26150 ↗
21. Armaki H.G. · A · 2008 · 490 · 66
22. Maruyama, K. and Armaki, H.G. (2009) Cr concentration dependence of overestimation of long term creep life in strength enhanced high Cr ferritic steels. Proc. ECCC Creep Conf., pp. 543-552. April 21-23, 2009, Zurich.
23. Masuyama, E (2005) Creep rupture life and design factors for high strength ferritic steels. Proc. Creep and Fracture in High Temperature Components—Design and Life Assessment Issues, pp. 983-996.
24. Murata Y · ISIJ Int · 2002 · 42 · 1423 — 1429
25. 10.2355/isijinternational.45.190910.2355/isijinternational.45.1909 ↗
26. Kunieda, T., Akada, K., Murata, Y, Koyama, T. and Morinaga, M. (2007) Estimation of the system energy of the lath martensite phase in high Cr ferritic steels. Adv. Mater. Res. 15-17, 690–695.10.4028/www.scientific.net/AMR.15-17.690 ↗
27. Tsukada Y · Mater Technol · 2008 · 49 · 484
28. Saito, Y, Kita, T., Murata, Y, Morinaga, M., Koyama, T., Hasegawa, Y. and Igarashi, M. (2009) Proc. 47th Symp. on Strength of Materials at High Temperatures, pp. 81-85.
29. Hofer P. · Steel Res · 1998 · 69 · 34310.1002/srin.199805562 ↗
30. 10.2355/isijinternational.39.87410.2355/isijinternational.39.874 ↗
31. Masuyama E · CAMP-ISIJ · 1998 · 11 · 1245
32. 10.2355/isijinternational.45.10710.2355/isijinternational.45.107 ↗
33. 10.2355/isijinternational.43.108910.2355/isijinternational.43.1089 ↗
34. 10.2355/isijinternational.47.73310.2355/isijinternational.47.733 ↗
35. Sawada K. · A · 2008 · 480 · 554— 563
36. 10.1016/j.actamat.2006.07.00910.1016/j.actamat.2006.07.009 ↗
37. Mitsuhara, M., Morioka, S., Hata, S., Ikeda, K. and Naka-shitna, H. (2009) Analysis of creep degradation behavior in lath martensite based on crystallographic orientation changes. Report of the 123rd Committee on Heat-resisting Metals and Alloys, Japan Society for the Promotion of Science, 50,37-43.
38. Masuyama, E and Nishimura, N. (1994) Effect of structures and residual elements on creep behavior of modified 9Cr- 1Mo steel. In: Oikawa, H. et al. (eds), Strength of materials, pp. 657-660.
39. Endo T · Tetsu Hagane · 2002 · 88
40. Sawada, K., Maruyama, K, Hasegawa, Y. and Muraki, T. (2000) Creep life assessment of high chromium ferritic steels by recovery of martensitic lath structure. Key Eng. Mater. 171-174, 109–114.10.4028/www.scientific.net/KEM.171-174.109 ↗
41. Suzuki K. · Tetsu Hagane · 2000 · 86 · 550— 557
42. Masuyama, E, Fujita, M., Maruyama, M. and Endo, M. (2002) Development of creep life assessment technology for mod.9Cr-lMo steel. EPRI/DOE Conf Advances in life assess-ment and optimization offossil power plants, Orlando, Florida.
43. 10.1299/jsmea.45.3010.1299/jsmea.45.30 ↗
44. Abe, Y, Komazaki, S., Mitsueda, T. and Kohno, Y. (2010) Change in electrochemical property of 12%Cr ferritic steel in 1M-KOH solution due to creep. Adv. Mater. Res. 89-91, 1–5.10.4028/www.scientific.net/AMR.89-91.1 ↗
45. Shirai Y · High Temp. Mater. Process · 1998 · 12 · 5710.1515/HTMP.1998.17.1-2.57 ↗
46. 10.1080/18811248.2002.971529110.1080/18811248.2002.9715291 ↗
47. Honda, T., Komazaki, S., Sugimoto, T. and Kohno, Y. (2007) Microstructure evaluation of high chromium ferritic steels based on hydrogen desorption profile analysis. Adv. Mater. Res. 15-17, 684–689.10.4028/www.scientific.net/AMR.15-17.684 ↗
48. 10.2320/matertrans.44.23910.2320/matertrans.44.239 ↗
49. Masuyama, E (2009) Hardness model for creep life assess-ment of high strength martensitic steels. Mater Sci. Eng. A510-511, 154–157.10.1016/j.msea.2008.04.133 ↗
50. Masuyama E · Proc. ECCC Creep Conf · 2009 · 31— 42
51. Sawada K. · ISIJ Int · 2005 · 45 · 1934— 1939
52. 10.1557/jmr.2007.000910.1557/jmr.2007.0009 ↗
53. Prager M · Trans. ASME · 2000 · 122 · 273 —280
54. Komazaki S. · ASTM · 2000 · 28 · 249
55. 10.2355/isijinternational.47.122810.2355/isijinternational.47.1228 ↗
56. Kusumoto J. · Therm. Nucl. Power · 2007 · 58 · 1123
57. Komazaki, S., Kato, T., Kohno, Y. and Tanigawa, H. (2009) Creep property measurements of welded joint of reduced-activation ferritic steel by the small-punch creep test. Mater. Sci. Eng. A510-511, 229–233.10.1016/j.msea.2008.04.132 ↗