Lifing issues in hot gas path components of heavy-duty gas turbines
Source abstract
Abstract
Gas turbine hot-gas-path components, which include combustion liners, transition pieces, turbine nozzles and turbine buckets, are exposed to hot gases discharged from combustion systems and suffer from severe materials degradation and damage even in the early stage of operation. The severity of the damage and degradation increases with increasing inlet temperature and size of the gas turbines, which also increase the maintenance cost. ‘Lifing’ of components is, therefore, becoming a very critical issue. This paper describes several kinds of component damage and material degradation occurring in the 1,100°C- and 1,300°C-class heavy-duty gas turbines and then shows how we revised those component lives from the original design ones. Analytical-based assessment methods associated with condition-based assessment ones, some examples of assessment results, and component life extension technologies are also described.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Technical Engine Diagnostics and Monitoring · Advanced Sensor Technologies Research · Engineering Diagnostics and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Shiobara M. · Thermal Nucl. Power Eng. Soc · 2010 · 643 · 339
2. Matta R.K. · GE Reference Library GER- · 2000 · 3935 · 1
3. Yoshioka, Y. et al. (1998) Life assessment technique for gas-turbine hot-section components. Mater Adv. Power Eng. Part III, 1411-1420.
4. Balevic D. · 2009
5. Hatsushiba, S. (1990) Large gas-turbine operation experi-ence, diagnosis & maintenance. 18th GTSJ Gas Turbine Seminar, p. 65.
6. Yoshioka Y · J Gas Turbine Soc. Japan · 2004 · 32 · 130
7. Yoshioka Y. · eds), Superalloys, p · 1996 · 173 · TMS
8. Saito, D. et al. (1995) Microstructural analysis for service temperature estimation of gas-turbine combustors. Report of 123rd Committee on Heat-Resisting Metals and Alloys, 36, 131.
9. 10.1016/0022-3697(61)90054-310.1016/0022-3697(61)90054-3 ↗
10. Wagner C · Z Elektrochem · 1961 · 65 · 581
11. Yoshioka Y. · Tesu Hagane · 1994 · 80 · 55
12. Yoshioka Y. · Tesu Hagane · 1993 · 79 · 77
13. Yoshioka, Y. (1994) Effects of material degradation on mechanical properties of cast Ni-base superalloy IN738LC. ASM 1993 Material Congress Materials Week/1993, p. 53.
14. Orowan E · 1947
15. Ansell G.S. · Trans. Metall. Soc. AIME · 1959 · 215 · 838
16. Bernstein, H.L. (1990) Life management system for general electric frame 7E gas turbine. In: Viswanathan, R. and Allen, J.M. (eds), Life assessment & repair technology for combus-tion-turbine hot-section components 1990, p. 119. EPRI GS-7031, ASM International, OH.
17. Fujiyama K. · Soc. Japan · 1994 · 22 · 85
18. Fujiyama K. · Proc. Eng. Saf Reliab. Availab · 1997 · 55
19. Yoshioka, Y, Saito, D., Takaku, R., Itou, S., Sato, I. and Ishibashi, K. (2008) Development, reliability evaluation and service experiences of gas turbine blade life regeneration technology. 5th Int. Conf Creep and Creep-Fatigue Interac-tion, 1-15, 1–9.