journal article·2022-11-02

Effect of Cr segregation on creep strength in grade 91 steels

Kota Sawada, Kazuhiro Kimura

Materials at High Temperatures· Volume 39· Issue 6
Publisher page

Abstract

Several heats of T91 steel and P91 steel were evaluated, focusing on the distribution of segregation and its effect on creep strength. The difference between the maximum and minimum Cr content, ΔCr, at a constant distance (x) was estimated in the range of 1 mm along the wall thickness direction for T91 steels. The standard deviation of ΔCr was employed as an indicator of the degree of segregation. The standard deviation correlated with time to rupture at 650°C when the Cr content is relatively high. However, no clear correlation between them was observed when the Cr content is very low in the range of specification. In addition to Cr segregation, the Cr content itself should be considered as a cause of reduced creep strength when the Cr content is low. For P91 steel, the distribution of segregation was inhomogeneous as compared with T91 steel. For example, a strongly segregated area was confirmed at the position of 3/4 t from the outer surface of the pipe. On the other hand, no segregation band was observed in other areas of the same pipe.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fire effects on concrete materials · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research center for structural materials, National Institute for Materials Science, Tsukuba, Japan

References (7)

Show source-provided references
1. Thermal and Nuclear Power Engineering Society · 2007
2. 10.4028/www.scientific.net/KEM.171-174.48310.4028/www.scientific.net/KEM.171-174.483 ↗
3. 10.1016/j.msea.2013.12.08810.1016/j.msea.2013.12.088 ↗
4. 10.2355/isijinternational.ISIJINT-2019-35810.2355/isijinternational.ISIJINT-2019-358 ↗
5. NIMS creep data sheet, NIMS, No. 43A, (2014).
6. 10.1016/j.msea.2008.05.05510.1016/j.msea.2008.05.055 ↗
7. Santella M. · 2010