journal article·2018-11-02

The influence of chromium on early high temperature corrosion of ferritic alloys under SO2 atmosphere

Kathrin Nützmann, Axel Kranzmann, Christiane Stephan-Scherb

Materials at High Temperatures· Volume 35· Issue 6
Publisher page

Abstract

Comprehensive insights into the early stages of corrosion mechanisms provide fundamental knowledge to further understand and model long time material behaviour. The present work studies the early stages of combined oxidation and sulphidation of ferritic model alloys for time scales up to 250 h at 650°C to observe the influence of chromium during the corrosion under SO2. Model alloys were used to focus on the reaction of the intended elements: Fe, Cr, S, and O. Pure iron simultaneously forms magnetite and iron-sulphide in an early stage of corrosion, covered by a pure oxide layer after 100 h. Iron with 13 wt-% Cr shows hematite and mixed Fe–Cr-oxides first, before sulphides nucleate in the inner corrosion zone. With increasing ageing time a magnetite layer is observed below the hematite layer. Quantitative phase fractions of all corrosion products observed were determined from cross section images. Characterisation of the Fe13Cr corrosion scale by FIB revealed a highly porous structure in the inner corrosion zone where Cr-rich (Fe, Cr)-sulphides are present, and caused the scale to spall easily.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Federal Institute for Materials Research and Testing (BAM) , Berlin, Germany

Department for Earth Sciences, Freie Universität Berlin , Berlin, Germany

References (22)

Show source-provided references
1. 10.1007/s11085-014-9521-410.1007/s11085-014-9521-4 ↗
2. 10.3184/096034009X43818510.3184/096034009X438185 ↗
3. 10.1021/Ef050122i10.1021/Ef050122i ↗
4. 10.1021/ef501733510.1021/ef5017335 ↗
5. 10.1016/j.ijggc.2011.05.02910.1016/j.ijggc.2011.05.029 ↗
6. Flatley T · J Iron Steel Inst · 1971 · 209 · 523
7. 10.1002/(ISSN)1521-417610.1002/(ISSN)1521-4176 ↗
8. 10.1007/Bf0061213610.1007/Bf00612136 ↗
9. 10.1017/Cbo978113916390310.1017/Cbo9781139163903 ↗
10. Kofstad P · 1988
11. 10.1002/maco.20130730610.1002/maco.201307306 ↗
12. 10.1006/jssc.1996.020610.1006/jssc.1996.0206 ↗
13. 10.1002/pssa.221010011910.1002/pssa.2210100119 ↗
14. 10.1016/0022-3697(90)90050-P10.1016/0022-3697(90)90050-P ↗
15. 10.1007/Bf0060366810.1007/Bf00603668 ↗
16. 10.1007/Bf0066519310.1007/Bf00665193 ↗
17. 10.1016/j.calphad.2008.09.00910.1016/j.calphad.2008.09.009 ↗
18. 10.1016/j.egypro.2009.01.05210.1016/j.egypro.2009.01.052 ↗
19. 10.1016/0010-938x(75)90029-310.1016/0010-938x(75)90029-3 ↗
20. 10.1007/Bf0104672710.1007/Bf01046727 ↗
21. 10.1016/j.corsci.2015.03.01410.1016/j.corsci.2015.03.014 ↗
22. 10.1016/j.actamat.2010.08.03210.1016/j.actamat.2010.08.032 ↗