Comparison of thermal expansion and oxidation behavior of various high-temperature coating materials and superalloys
Source abstract
Abstract
The thermal expansion mismatch between a metallic substrate and its external oxide scale generates a strain on cooling that is a primary cause of spallation of protective oxide scales. This study compares thermal expansion behavior and cyclic oxidation performance of the two major composition classes of high-temperature commercial coatings for protection of single-crystal superalloys. The thermal expansion of cast MCrAlY (M = Ni and/or Co) alloys and cast aluminides (NiAl, (Ni,Pt)Al and Ni3Al) was measured at temperatures up to 1300°C and compared to that of a single-crystal Ni-base superalloy. The tendency for scale spallation from each alloy was evaluated by cyclic oxidation testing at 1150°C. The coefficients of thermal expansion for the aluminides were lower than those of the MCrAlY-based alloys at all temperatures and scale adherence to the Hf-doped aluminides was generally superior. Scale adherence to the various compositions of MCrAlY-type alloys did not directly correlate to their thermal expansion behavior or substrate strength. For both types of materials, the presence of a reactive element (Y,Hf, etc.) had no detectable effect on thermal expansion but a major effect on scale adherence. There was no obvious influence of Al content on the thermal expansion of β phase Ni–Al compositions. The addition of Pt resulted in a lower average thermal expansion for hyperstoichiometric (Ni,Pt)Al at temperatures above 930°C, but this effect was not observed in hypostoichiometric (Ni,Pt)Al.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. 10.1007/BF0322266410.1007/BF03222664 ↗
2. Mevrel, R.Mater. Sci. Eng., A120, 13-24 (1989).10.1016/0921-5093(89)90713-2 ↗
3. 10.1361/10599630077035004110.1361/105996300770350041 ↗
4. 10.1007/s11666-997-0012-x10.1007/s11666-997-0012-x ↗
5. 10.1007/s11837-000-0112-210.1007/s11837-000-0112-2 ↗
6. 10.1007/s11661-999-0332-110.1007/s11661-999-0332-1 ↗
7. 10.1016/S0921-5093(97)00851-410.1016/S0921-5093(97)00851-4 ↗
8. 10.7449/2000/Superalloys_2000_629_63810.7449/2000/Superalloys_2000_629_638 ↗
9. 10.4028/www.scientific.net/SSP.41.13710.4028/www.scientific.net/SSP.41.137 ↗
10. Nicholls J. R. · Mater. High Temp. · 1997 · 14 · 510.1080/09603409.1997.11689555 ↗
11. 10.1016/0025-5416(87)90387-910.1016/0025-5416(87)90387-9 ↗
12. 10.1016/0040-6090(94)90335-210.1016/0040-6090(94)90335-2 ↗
13. 10.1007/s11661-998-0274-z10.1007/s11661-998-0274-z ↗
14. Sarioglu, C., Stinner, C., Blachere, J. R., Birks, N., Pettit, F. S., Meier, G. H. and Smialek, J. L. In:Superalloys 1996. (Eds. R. D. Kissinger, D. J. Deye, D. L. Anton, A. D. Cetel, M. V. Nathal, T. M Pollock and D. A. Woodford) TMS, Warrendale, PA, pp.71–80 (1996).
15. Haynes, J. A., Zhang, Y., Lee, W. Y., Pint, B. A., Wright, I. G. and Cooley, K. M. In:Elevated Temperature Coatings: Science and Technology III, (Eds. J. M. Hampikian and N. B. Dahotre) TMS, Warrendale, PA, pp.185–196 (1998).
16. Strawbridge A. · Mater. High Temp. · 1994 · 12 · 17710.1080/09603409.1994.11689484 ↗
17. Stringer, J.Mater. Sci. Eng., A120, 129-137 (1989).10.1016/0921-5093(89)90730-2 ↗
18. 10.1007/BF0281168710.1007/BF02811687 ↗
19. 10.1007/BF0104681810.1007/BF01046818 ↗
20. 10.1179/mht.2000.01310.1179/mht.2000.013 ↗
21. 10.1007/BF0061169610.1007/BF00611696 ↗
22. 10.1007/BF0061215910.1007/BF00612159 ↗
23. 10.1016/0257-8972(87)90098-310.1016/0257-8972(87)90098-3 ↗
24. 10.1007/s11661-999-0308-110.1007/s11661-999-0308-1 ↗
25. 10.1007/s11661-001-0150-610.1007/s11661-001-0150-6 ↗
26. Haynes, J. A., More, K. L., Pint, B. A., Wright, I. G., Cooley, K. and Zhang, Y.Mater. Sci. Forum, 369-372, 679-686 (2001).10.4028/www.scientific.net/MSF.369-372.679 ↗
27. 10.1557/JMR.2000.009910.1557/JMR.2000.0099 ↗
28. 10.1179/mht.2000.02410.1179/mht.2000.024 ↗
29. Leyens, C., Wright, I. G., and Pint, B. A.Mater. Sci. Forum, 369-372, 571-578 (2001).10.4028/www.scientific.net/MSF.369-372.571 ↗
30. Evans, H. E.Mater. Sci. Eng., A120, 139-146 (1989).10.1016/0921-5093(89)90731-4 ↗
31. 10.1179/mht.2000.01710.1179/mht.2000.017 ↗
32. Pint, B. A., More, K. L., Tortorelli, P. F., Porter, W. D. and Wright, I. G.Mater. Sci. Forum, 369-372, 411-418 (2001).10.4028/www.scientific.net/MSF.369-372.411 ↗
33. Plummer, W. A. In:International Symposium on Thermal Expansion of Solids. American Institute of Physics Conference Proceedings, New York, p. 17 (1973)
34. Touloukian, Y. S., Kirby, R. K., Taylor, R. E. and Lee, T. Y. R. In: Thermophysical Properties of Matter, Volume 13, ThermalExpansion Nonmetallic Solids. Plenum, New York, NY, p.176 (1977)
35. 10.1016/0025-5416(84)90140-X10.1016/0025-5416(84)90140-X ↗
36. 10.1007/BF0264631810.1007/BF02646318 ↗
37. Wortman, D. J., Nagaraj, B. A. and Duderstadt, E. C.Mater. Sci. Eng., A121, 433-440 (1989).10.1016/0921-5093(89)90798-3 ↗
38. Haynes, J. A., Rigney, E. D., Ferber, M. K. and Porter, W. D.Surf. Coatings Technol. 86-87, 102-108 (1996).10.1016/S0257-8972(96)02985-4 ↗
39. Hillery, R. V., Pilsner, B. H., McKnight, R. L., Cook, T. S. and Hartle, M. S. Thermal Barrier Coating Life Prediction Model Development' Final Report, NASA CR 180807, National Aeronautics and Space Administration, Washington DC, Nov. 1988
40. Clark, R. W. and Whittenberger, J. D. In: Thermal Expansion — 8. (Ed. T. A. Hahn) Plenum Press, New York, NY, p.189 (1984)10.1007/978-1-4899-5004-8_19 ↗
41. Touloukian, Y. S., Kirby, R. K., Taylor, R. E., and Lee, T. Y. In: Thermophysical Properties of Matter, Vol. 12, Thermal Expansion —Metallic Elements and Alloys. IFI/Plenum Co., New York, p.438 (1977)10.1007/978-1-4757-1631-3 ↗
42. 10.1023/A:101034750405210.1023/A:1010347504052 ↗
43. Smialek, J. L., Nesbitt, J. A, Barrett, C. A. and Lowell, C. E. In:Cyclic Oxidation of High Temperature Materials. (Eds. M. Schiitze and W. J. Quadakkers) Institute of Materials, London, UK, pp.148-68 (1999)
44. Pint B. A.
45. 10.1111/j.1151-2916.2003.tb03358.x10.1111/j.1151-2916.2003.tb03358.x ↗
46. 10.7449/1984/Superalloys_1984_711_72010.7449/1984/Superalloys_1984_711_720 ↗
47. Smialek, J. L. and Pint, B. A.Mater. Sci. Forum, 369-372, 459-466 (2001).10.4028/www.scientific.net/MSF.369-372.459 ↗
48. 10.1149/1.212996510.1149/1.2129965 ↗
49. 10.1179/msc.1981.15.1.710.1179/msc.1981.15.1.7 ↗
50. 10.1023/A:102052512305610.1023/A:1020525123056 ↗
51. 10.1016/S1359-6454(00)00156-710.1016/S1359-6454(00)00156-7 ↗