The effect of microstructure on the oxidation behaviour of Ti-46.5Al-4(Cr,Nb,Ta,B) and Ti-47 Al-4(Cr,Nb,Mo,B)
Source abstract
Abstract
AbstractThe isothermal and cyclic oxidation behaviour of the intermetallic alloys Ti-46.5Al-4(Cr,Nb,Ta,B) and Ti-47 Al-4(Cr,Nb,Mo,B) was studied at 700, 800, and 900°C in air. Emphasis was placed on the effect of microstructure, i.e. fine-grained near gamma, and coarse-grained fully lamellar on the oxidation resistance. The results have shown that the oxidation kinetics of the alloys under investigation was affected by the microstructure. Under the defined conditions, in the case of the tantalum-containing alloy the fine-grained structure, and in the case of the molybdenum-containing alloy the coarse-grained fully lamellar structure showed a better oxidation resistance. It was found that the effect was more pronounced under cyclic rather than under isothermal oxidation conditions. Furthermore, isothermal and cyclic oxidation experiments have shown that Ti-46.5Al-4(Cr,Nb,Ta,B) is more resistant against the defined oxidation conditions than Ti-47 Al-4(Cr,Nb,Mo,B).Keywords: TiAl-based intermetallic alloysmicrostructuresoxidationisothermalcyclic
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Kim Y.-W. · 1999
2. Kim Y.-W. · J. Met. · 1994 · 46 · 30
3. 10.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U10.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U ↗
4. 10.1007/BF0265681010.1007/BF02656810 ↗
5. Yamaguchi, M., and Inui, H. In: Darolia, R., Lewandowski, J. J., Liu, C. T., Martin, P. L., Mirade, D. B. and Nathal, M. V. (eds)Structural Intermetallics, pp. 127-142. The Mineral, Metals and Materials Society, Warrendale, PA, USA (1993).
6. 10.1557/JMR.1989.059510.1557/JMR.1989.0595 ↗
7. Brady, M. P., Pint, B. A., Tortorelli, P. F., Wright, LG., and Hanrahan Jr., R. J. In: Cahn, R. W., Haasen, P., Kramer, E. J. and Schiitze, M. (eds)Corrosion and Environmental Degradation of Materials, Vol. 19. Materials Science and Technology Wiley-VCH, Weinheim, Germany (1999).
8. Becker S. · Oxidat. Met. · 1995 · 38 · 425
9. 10.1016/0010-938X(92)90192-610.1016/0010-938X(92)90192-6 ↗
10. 10.1007/BF0032138610.1007/BF00321386 ↗
11. 10.1016/0010-938X(93)90313-610.1016/0010-938X(93)90313-6 ↗
12. 10.1016/0956-716X(95)00150-T10.1016/0956-716X(95)00150-T ↗
13. 10.1007/BF0104688210.1007/BF01046882 ↗
14. 10.1016/0966-9795(95)94254-C10.1016/0966-9795(95)94254-C ↗
15. 10.1023/A:101883951110210.1023/A:1018839511102 ↗
16. 10.1016/S0168-583X(98)00820-910.1016/S0168-583X(98)00820-9 ↗
17. 10.1007/BF0036519410.1007/BF00365194 ↗
18. 10.1016/0010-938X(93)90276-M10.1016/0010-938X(93)90276-M ↗
19. Haanappel V. A. C. · Mater. High Temp · 1997 · 14 · 1910.1080/09603409.1997.11689523 ↗
20. 10.1007/BF0167050310.1007/BF01670503 ↗
21. 10.1557/PROC-460-2910.1557/PROC-460-29 ↗
22. Clemens H. · Prakt. Metall · 2000 · 37 · 19410.1515/pm-2000-370404 ↗
23. 10.1023/A:101889242212110.1023/A:1018892422121 ↗
24. 10.1023/A:101883630437410.1023/A:1018836304374 ↗
25. 10.1016/S0966-9795(98)00076-410.1016/S0966-9795(98)00076-4 ↗
26. 10.1016/S1359-6462(97)00178-410.1016/S1359-6462(97)00178-4 ↗
27. 10.1007/BF0105079910.1007/BF01050799 ↗
28. 10.1007/BF0124485110.1007/BF01244851 ↗
29. Haanappel, V. A. C. and Stroosnijder, M. F. In Schiitze, M. and Quadakkers, W. I. (eds)Cyclic Oxidation of High Temperature Materials, pp. 225-239. EFC Publications no. 27. Frankfurt, Germany (1999).
30. Murris I.