Measurement of flow stress at high temperature in solid torsion tests
Source abstract
Abstract
This document outlines good measurement practice to be adopted for the determination of flow stress at high temperature in torsion tests on solid metallic materials. The recommendations are applicable to hot (isothermal) tests at medium to high rates of strain (10–3–102 s–1) at temperatures relevant to metal working practice.Guidance is provided on appropriate testpiece geometries and methods of verifying the temperature distribution along the length of the testpiece. Flow diagrams are given showing all the steps that are necessary, including the correction factors that need to be applied for deformational heating and for the determination of true stress. Details are given of the calibration procedures that should be followed to provide traceability to the National Measurement System.Technical input to the document has been provided by the steering group of a European SMT funded project on High Temperature Testing, TESTIFY, that contained representatives of industrial users and producers of a wide range of engineering materials as well as academic modellers.An experimental programme was conducted during the preparation of this document to underpin the procedures in this guide.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Centre, National Physical Laboratory
CEMEF, Sophia Antipolis
University of Padua
References (74)
Show source-provided references
1. Roebuck, B., Loveday, M. S., Chastel, Y, Fiorucci, G. and Dal Negro, T. High Temperature Solid Torsion Tests. NPL Mea-surement Good Practice Guide No 58, ISSN 1368-6550 (May 2003).
2. 10.1016/0036-9748(85)90189-910.1016/0036-9748(85)90189-9 ↗
3. 10.1016/0020-7403(93)90056-Z10.1016/0020-7403(93)90056-Z ↗
4. 10.1016/1359-6454(96)00114-010.1016/1359-6454(96)00114-0 ↗
5. Bocher, P., Jonas, J. J. and Montheillet, E Nucleation and growth during dynamic recrystallization of a 304 stainless steel. 35th Annual Conference of Metallurgists, Montréal, Québec, Canada (1996), in Hot Workability of Steels and Light Alloys-Composites, Met. Soc. CIM, Montréal, pp. 443-450 (1996).
6. 10.1179/cmq.1994.33.2.14510.1179/cmq.1994.33.2.145 ↗
7. Barraclough, D. R., Whittaker, H. J., Nair, K. D. and Sellars, C. M. Effect of specimen geometry on hot torsion test results for solid and tubular specimens. J Testing Evaluation, 220-228 (1973).
8. Barraclough, D. R. and Sellars, C. M. The effects of varying deformation conditions during hot torsion testing. Proc. Conf Mechanical properties of materials at high rates of strain, Oxford, 111-123 (1974).
9. 10.1016/S1359-6454(02)00048-410.1016/S1359-6454(02)00048-4 ↗
10. Barnett, M. R. and Montheillet, E The generation of new high angle boundaries during the hot torsional deformation of aluminium. First Joint Int. Conf on Reciystallization and Grain Growth (ReX-GG 2001), Aachen, pp. 869-874 (2001).
11. Perrin, M., Combres, Y, Levaillant, C. and Montheillet, E Constitutive relations for a commercially pure alumi-nium from room temperature to 500°C. 8th Riso Inter-national Symposium on Metallurgy and Materials Science Constitutive Relations and Their Physical Basis, pp. 479-484, Rises National Laboratory, Roskilde, Danemark (1987).
12. Malcor, J.-G., Montheillet, E and Champin, B. Mechanical and microstructural behaviour of Ti-6%A1-4%V alloy in the hot working range. 5th International Conference on Titanium, pp. 1495-1502, Deutsche Gesellschaft fur Metallkunde, Munich (1985).
13. 10.1016/0001-6160(84)90187-110.1016/0001-6160(84)90187-1 ↗
14. 10.1016/0001-6160(85)90035-510.1016/0001-6160(85)90035-5 ↗
15. Malcor, J.-G. and Montheillet, E Mechanical and microstruc-tural behaviour of Ti-6%A1-4%V in the hot working range. 4th Riso International Symposium on Metallurgy and Materials Science Deformation of Multiphase and Particle Containing Materials, pp. 399-404, Rises National Laboratory, Roskilde, Danemark (1983).
16. Malcor, J.-G. and Montheillet, E Loi de comportement de l’alliage de titane Ti-6%A1-4%V dans le domaine du forgeage chaud. Mém. Etud. Sci. Rev. Métall., 80, 89–103 (1983).
17. Malcor, J.-G. and Montheillet, E Prise en compte de l’hétér-éité de temperature dans l’interprétation de l’essai de torsion a chaud. Materiaux et Techniques, 12, 51–57 (1983).
18. Regammi, G., Perdrix, C. and Montheillet, E Effet de mémoire dans le comportement a chaud de l’aluminium &forme par torsion a vitesse variable. Sciences et Techniques de l’Armement, 57, 285-302 (1983). Cahiers du Groupe Franfais de Rhéologie, Applications de la rhéologie aux problémes de fabrication industrielle. 6, 45–57 (1983).
19. Perdrix, C., Perrin, M. and Montheille, E Comportement mécanique et evolution structurale de l’aluminium au cors d’une deformation a chaud de grande amplitude. Mém. Etud. Sci. Rev. Métall., 78, 309–320 (1981).
20. Perdrix, C. and Montheillet, E An analysis of the behaviour of aluminium during a strain rate change. 5th International Conference on the Strength of Metals and Alloys (IcsmA 5), pp. 571-576, Pergamon Press, Oxford (1979).
21. Zhou, M. and Clode, M. P. Hot torsion tests to model the deformation behaviour of aluminium alloys at hot working temperatures. J Mat. Processing Technology, 72, 75–85 (1997).
22. Zhou, M. and Clode, M. P. Modelling of high temperature viscoplastic flow behaviour of aluminium alloys by hot torsion testing. Materials Science and Technology, 13, 818–824 (1997).10.1179/mst.1997.13.10.818 ↗
23. 10.1016/S0168-874X(98)00044-410.1016/S0168-874X(98)00044-4 ↗
24. 10.1016/S0927-0256(97)00164-X10.1016/S0927-0256(97)00164-X ↗
25. 10.1016/S0167-6636(97)00035-510.1016/S0167-6636(97)00035-5 ↗
26. Zhou, M. and Clode, M. P. Effect of specimen geometry on temperature rise and flow behaviour of aluminium in hot torsion testing. Materials and Design, 17, No. 5/6, 275–281 (1996).10.1016/S0261-3069(97)00021-6 ↗
27. 10.1080/0149573980895616010.1080/01495739808956160 ↗
28. Gavrus A. Massoni E. and Chenot J. L. Computer Aided Rheology For Non Linear Large Strain Thermo-Viscoplastic Behaviour Formulated As An Inverse Problem Isip ‘94 Paris France Bui and Al. (eds.) Balkema 123-30 (1994).
29. Gavrus, A., Massoni, E. and Chenot, J. L. Computer Aided Rheology For Constitutive Parameter Identification, Complas Iv, Barcelona, Spain, pp. 755-66. Owen et al. (eds), Pineridge Press: Swansea, UK (1995).
30. Gavrus A. Massoni E. and Chenot J. L. Constitutive Para-meter Identification Using A Computer Aided Rheology Approach Numiform’95 Ithaca USA pp. 563–568. Shen et al. (eds.) A. A. Balkema Edition (1995).
31. 10.1088/0957-0233/9/6/00210.1088/0957-0233/9/6/002 ↗
32. Dal Negro, T., D’Alvise, L., Chastel, Y. and Massoni, E. Inverse technique for automatic identification of rheological parameters in combined tension-torsion and compression conditions. Proc. of the 4th ESAFORM Conf on Materials Forming, pp. 419-422. April 23-25, Liège (2001).
33. Gaffard V. Chastel Y Dal Negro T. and Lerale A. Inverse analysis of the torsion test for metallurgical purposes. Euro-therm 68 Poitiers (full text on CD) March 2001.
34. Roebuck, B., Lord, J. D., Brooks, M., Loveday, M. S., Sellars, C. M. and Evans, R. W. Measuring Flow Stress in Hot Axisym-metric Compression Tests. Measurement Good Practice Guide No 3, NFL CMMT(GPG)003. Revised Summer 2002 (1997).
35. Roebuck, B., Lord, J. D., Brooks, M., Loveday, M. S., Sellars, C. M. and Evans, R. W. Measurement of Flow Stress in Hot Axisymmetric Compression Tests. Mater. High Temp., 23, xx—xx (2006).
36. Lacey, A. J., Loveday, M. S., Mahon, G. J., Roebuck, B., Sellars, C. M. and van der Winden, M. R. Measuring Flow Stress in Plane Strain Compression Tests. NPL Measurement Good Practice Guide No 27. NFL, April 2000, revised Summer 2002.
37. 10.1179/mht.2006.00610.1179/mht.2006.006 ↗
38. Unwin WC. The testing of materials of construction. Long-mans Green and Co London (1910).
39. Loveday, M. S. High temperature and time-dependent mechan-ical testing—an historical introduction. In Measurement of High Temperature Mechanical Properties of Materials, pp. 1-12. Loveday, M. S., Day, M. F. and Dyson, B. F. (eds.), HMSO, London (1982).
40. Tapsell, H. J. and Bradley, J. Mechanical tests at high tempera-tures on a non-ferrous alloy of nickel and chromium. Engi-neering, 120, 614-615, 648-649 and 746-747 (1925).
41. Henderson, J. and Dyson, B. F. Multi-axial creep testing, Chapt 11, 171-184, Measurement of High Temperature Mechanical Properties of Materials, Loveday, M. S., Day, M. F. and Dyson, B. F. (eds.), HMSO, London (1982).
42. 10.1179/02670830322500871610.1179/026708303225008716 ↗
43. 10.1002/srin.19930157910.1002/srin.199301579 ↗
44. Swift, H. W. Engineering, 164, 253–257 (1947).
45. Hardwick, D. and McG Tegart, W. J. Mem. Sci. Rev. Metall., 58, 869–880 (1961).
46. Stilwe, H. P. and Turck, H. Z. Metall., 55, 699–703 (1964).
47. Morozumi, E Nippon Kokan Tech. Re v., (4) 67 (1965).
48. Billington, E. W. Nonlinear response of various metals: Perma-nent length changes in twisted tubes. J Appl. Phys., 10, 51 (1977).
49. Shrivastava, S., Jonas, J. J. and Toth, L. S. The inverse Swift effect in pretwisted and freely extended wires. Modelling the deformation of solids, pp. 303-307. Lowe, T. C., Rollett, A. D., Follansbee, P. S. and Daehn, G. S. (eds.), The Minerals, Metals and Materials Soc. (1991).
50. 10.1115/1.322500110.1115/1.3225001 ↗
51. 10.1179/03071697980327626410.1179/030716979803276264 ↗
52. Backofen, WA. and Fields, D. S. Am. Soc. Test. Mater. Proc., 57, 1259 (1957).
53. 10.1007/BF0303841210.1007/BF03038412 ↗
54. Forestier, R., Massoni, E. and Chastel, Y. Estimation of constitutive parameters using an inverse method couplied to a 3D finite element software. Journal of Materials Processing Technology, 125-126, 594-601 (2002).
55. Dieter, G. E. Mechanical Metallurgy, (Chapter 2, stress—strain relationships) and pp. 539–541 (compression tests). SI Metric Edition, McGraw-Hill, pp. 18-71 (1989).
56. Harris, J. N. Mechanical Working of Metals: Theory and Practice. Int. Series on Mat Sci and Technology, 36, Pergamon (1983).
57. Kandil E Testpiece alignment device. Private communication NFL (2001).
58. Dixon, M. J. Dynamic force measurements. In Materials Metrology and Standards for Structural Performance, Chap. 4, pp. 55-80. Dyson, B. F., Loveday, M. S. and Gee, M. G. (eds.), Chapman and Hall (1995).10.1007/978-94-011-1264-2_4 ↗
59. Albright, J. Dynamic strain measurements. In Materials Metrology and Standards for Structural Performance, Chap. 6, pp. 114-133. Dyson, B. F., Loveday, M. S. and Gee, M. G. (eds.), Chapman and Hall (1995).10.1007/978-94-011-1264-2_6 ↗
60. Colclough, A. Methods of practical thermometry in the range 0 to 3000°C. In Measurement of High Temperature Mechan-ical Properties of Materials. Loveday, M. S., Day, M. F. and Dyson, B. F. (eds.), HMSO, London (1982).
61. Devaux, M. P. E. The practical realization of temperature mea-surement standards in high temperature mechanical testing. In Measurement of High Temperature Mechanical Properties of Materials, Loveday, M. S., Day, M. F. and Dyson, B.E (eds.), HMSO, London (1982).
62. Loveday M. S. Day M. F. and Dyson B. F. Measurement of High Temperature Mechanical Properties of Materials HMSO London (1982).
63. Foster S. R. Simulation of Hot Rolling of Low Carbon Steel. PhD Thesis University of Sheffield (1981).
64. 10.1179/02670830010150789310.1179/026708300101507893 ↗
65. Rietman B. Numerical analysis of inhomogeneous deforma-tion in plane strain compression. PhD thesis University of Twente Netherland (1999).
66. Bell, S. A Beginner 's Guide to the Uncertainty of Measurement. Good Practice Guide No. 11, National Physical Laboratory (1999).
67. Taylor B. N. and Kuyatt C. E. Guidelines for evaluating and expressing uncertainty of 1VIST measurement results. Download from http://physics.nist.gov. (1993).10.6028/NIST.TN.1297 ↗
68. NAMAS. The Expression of Uncertainty and confidence in Measurement, NAMAS MS 3003. NAMAS, Feltham, TW13 4UN, UK (1997).
69. Birch, K. Estimating Uncertainties in Testing. Measurement Good Practice Guide No 36, BMTA/NPL (2001).
70. Kandil EA. Lord J. D. Bullough C. K. Georgsson P. Legendre L. Money G. Mulligan E. Fry A. T. Gorley T. A. E. and Lawrence K. M. The UNCERT Manual of Codes of Practice for the Determination of Uncertainties in Mechan-ical Tests on Metallic Materials. [CD-ROM —available from NPL] ISBN 0-0946754-41-1 (Current available on the web at http://www.npl.co.uldnpl/cmmt/projects/uncert/index.html) (2000).
71. 10.1088/0022-3735/10/4/01610.1088/0022-3735/10/4/016 ↗
72. Osgerby, S. and Loveday, M. S. Creep Laboratory Manual. NPL Report DMM(A)37 (1992).
73. Forestier, R., Massoni, E. and Chastel, Y. Estimation of constitutive parameters using an inverse method coupled to a 3D finite element software. Journal of Materials Processing Technology, 125-126, 594-601 (2002).
74. 10.1016/0924-0136(96)02369-210.1016/0924-0136(96)02369-2 ↗