journal article·1999-01

Long-term oxidation performance of ingot-produced Fe3Al alloys

B. A. Pint, P. F Tortorelli, I .G. Wright

Materials at High Temperatures· Volume 16· Issue 1
Publisher page

Abstract

AbstractThe oxidation performance of ingot-produced Fe-28at.%Al-(2–5)%Cr alloys with minor oxygen-active element additions was examined in long-term exposures at 1,000–1,300°C. As expected for alumina-forming alloys, additions of Zr, Y and Hf improved the oxidation behavior of these alloys. At the lower end of the temperature range, these alloys performed similarly to other iron-base alumina-formers. However, at higher temperatures, scale spallation was increased and significant deformation of the substrate was observed. This type of scale spallation was not observed on other alumina-formers. Oxidation data were used to predict times to breakaway for this temperature range.Keywords: ODS FeCrAlFe3Al alloysoxidation performancereactive element additionslifetime prediction
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Sykes C. · J. Iron Steel Inst · 1934 · 130 · 389
2. Tomaszewicz P. · Rev. High Temp. Mater · 1978 · 4 · 75
3. 10.1149/1.212404410.1149/1.2124044 ↗
4. DeVan, J. H.Oxidation of High-Temperature Intermetallics, p.107 Grobstein, T. and Doychak, J. (eds) The Minerals, Metals, and Materials Society, Warrendale, PA (1989)
5. 10.1007/BF0066501810.1007/BF00665018 ↗
6. 10.1016/0921-5093(92)90253-W10.1016/0921-5093(92)90253-W ↗
7. DeVan J. H. · Mater. High Temp · 1993 · 11 · 3010.1080/09603409.1993.11689436 ↗
8. DeVan J. H. · Corr. Sci. · 1993 · 35, 1065
9. Tortorelli, P. F. and DeVan, J. H.Processing, Properties, and Applications of Iron Aluminides, p. 257. Schneibel, J. H. and Crimp, M. A. (eds) The Minerals, Metals, and Materials Society, Warrendale, PA (1994).
10. 10.4028/www.scientific.net/MSF.251-254.58310.4028/www.scientific.net/MSF.251-254.583 ↗
11. Natesan, K. and Johnson, R. N.Heat-Resistant Materials II, pp. 591. Natesan, K., Ganesan, P. and Lai, G. (eds) ASM International, Materials Park, OH (1995).
12. Blough, J. L. and Stanko, G. J.Proc. 10th Annual Conf. Fossil Energy Materials, p. 455. Cole, N. C. and Judkins, R. R. (eds) US Department of Energy, Oak Ridge, TN (1996).
13. Kofstad, P.High Temperature Corrosion. Elsevier Applied Science, New York, NY (1988).
14. 10.1179/mst.1994.10.2.12610.1179/mst.1994.10.2.126 ↗
15. 10.1179/mst.1989.5.8.75410.1179/mst.1989.5.8.754 ↗
16. Strawbridge A. · Mater. High Temp · 1994 · 12 · 17710.1080/09603409.1994.11689484 ↗
17. 10.1007/BF0104681810.1007/BF01046818 ↗
18. Pint, B. A., Alexander, K. B. and Tortorelli, P. F.High-Temperature Ordered Intermetallic Alloys VI, Symp. Proc. v. 364, p. 1314 Horton, J., Hanada, S., Baker, I., Noebe, R. D., Schwartz, D. (eds) Materials Research Society, Pittsburgh, PA (1995).
19. Pint B. A. · Mater. Corr · 1996 · 47 · 663
20. Bennett, M. J., DeVan, J. H. and Tortorelli, P. F. Proc. 3rd Int. Conf. on Microscopy of Oxidation, p. 233. Newcomb, S. B. and Little, J. A. (eds) The Institute of Materials, London (1996).
21. 10.1557/JMR.1991.177910.1557/JMR.1991.1779 ↗
22. Tortorelli, P. F., Wright, I. G., Goodwin, G. M. and Howell, M. Elevated Temperature Coatings: Science and Technology Vol. II, p. 175. Dahotre, N. B. and Hampikian, J. M. (eds) The Minerals, Metals, and Materials Society, Warrendale, PA (1996).
23. Jonsson B. · Mater. Sci. Forum · 1997 · 551 · 251
24. Pint B. A. · Mater. High Temp · 1995 · 13 · 310.1080/09603409.1995.11689496 ↗
25. Quadakkers, W. J., Bongartz, K., Schubert, F. and Schuster, H.Materials for Advanced Power Engineering 1994, p. 1533. Coutsouradis, D. et al. (eds) Kluwer Academic Publishers, Dordrecht (1994).
26. 10.1002/maco.1994045040410.1002/maco.19940450404 ↗
27. 10.1111/j.1151-2916.1998.tb02335.x10.1111/j.1151-2916.1998.tb02335.x ↗
28. 10.1007/BF0264623710.1007/BF02646237 ↗
29. 10.1149/1.212917010.1149/1.2129170 ↗
30. 10.1007/BF0264634310.1007/BF02646343 ↗
31. 10.1007/BF0264638010.1007/BF02646380 ↗
32. 10.1149/1.212996510.1149/1.2129965 ↗
33. 10.1007/BF0065589710.1007/BF00655897 ↗
34. 10.1007/BF0167050510.1007/BF01670505 ↗
35. 10.1149/1.183856310.1149/1.1838563 ↗
36. 10.1007/BF0281168710.1007/BF02811687 ↗
37. Smialek, J. L.High Temperature Materials Chemistry IV, Proc. v. 88-5, p. 241. Munir, Z. A., Cubicciotti D. and Tagawa, H. (eds) Electrochemical Society Inc., Pennington, NJ (1988).
38. 10.1007/BF0066544210.1007/BF00665442 ↗
39. Allen, W. P. and Bornstein, N. S.High Temperature Coatings I, p.193. Dahotre, N. B. and Hampikian, J. M. (eds) The Minerals, Metals, and Materials Society, Warrendale, PA (1996).
40. Meier G. H. · Mater. Corr · 1995 · 46 · 232
41. 10.1016/0921-5093(95)09819-410.1016/0921-5093(95)09819-4 ↗
42. 10.1016/0040-6090(94)90335-210.1016/0040-6090(94)90335-2 ↗
43. 10.1007/BF0266467910.1007/BF02664679 ↗
44. 10.1016/0040-6090(77)90273-510.1016/0040-6090(77)90273-5 ↗
45. 10.1007/BF0065609110.1007/BF00656091 ↗
46. 10.1007/BF0109580410.1007/BF01095804 ↗
47. Prubner, K. and Alexander, K. B. Oak Ridge National Laboratory, unpublished research (1996).
48. Evans, H. E. and Strawbridge, A.Fundamental Aspects of High Temperature Corrosion VI, Proc. v.96-26, p. 1. Shores, D. A., Rapp, R. A. and Hou, P. Y. (eds) The Electrochemical Society, Pennington, NJ (1996).
49. Nesbitt J. A · 1989
50. 10.1016/0921-5093(92)90251-U10.1016/0921-5093(92)90251-U ↗
51. 10.1007/BF0093845710.1007/BF00938457 ↗
52. Pint B. A.