Verification of Long-term Creep Rupture Properties and Microstructure Stability of Ni based Alloy 45Ni-24Fe-23Cr-7W-Ti Parent Metal and Weldment
Source abstract
Abstract
To clarify the long-term creep rupture strength and microstructure stability of Ni-based alloy HR6W (45Ni-24Fe-23Cr-7W-Ti, ASME Code Case 2684), creep tests were conducted up to about 70,000h and 117,000h for the weldment and parent metal respectively, and the microstructure of crept specimens was experimentally investigated. The weldment showed comparable strength with the parent metal. The metallurgical microstructure characterization and quantitative evaluation on the precipitation behavior indicated the precipitation strengthening of Laves phase, M23C6 carbide and αCr phase in the HAZ (Heat Affected Zone) and parent metal contributing to the long-term creep rupture strength stability of weldment. Satisfactory microstructural stability was proven without distinct degradation during long-term creep at 700°C up to around 117,000h. Furthermore, the internal pressure creep test of circumferential weldment was performed to verify the damage and failure morphology of actual components under the multiaxial loading
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Strength Research Department, Mitsubishi Heavy Industries, Limited, Hyogo, Japan
Service Engineering Department, Mitsubishi Heavy Industries, Limited., . . Nagasaki, Japan
Strength Research Department, Mitsubishi Heavy Industries, Limited, Nagasaki, Japan
Boiler Engineering Department Mitsubishi Heavy Industries, Limited, Kanagawa, Japan
Funding
New Energy and Industrial Technology Development Organization
References (15)
Show source-provided references
1. Kumar A · 2019
2. Zhang WJ · 2019
3. Purgert R · 2019
4. Tokairin T · 2017
5. Fukuda M · 2019
6. Semba H · 2019
7. H.Okada H · 2010
8. Tokairin T · 2016
9. Tokairin T · 2015
10. The Japan Power Engineering and Inspection Corporation (JAPEIC), “Report of regulatory study for advanced thermal power plants (errata) “, June. 2013.
11. 10.1016/j.msea.2012.12.01910.1016/j.msea.2012.12.019 ↗
12. MatCalc engineering, https://www.matcalc-engineering.com
13. Wu Q. “Microstructural evolution in advanced boiler materials for ultra-supercritical coal power plants”. Ph.D. Thesis. University of Cincinnati, USA, 2006.
14. 10.1016/j.ijpvp.2010.03.01110.1016/j.ijpvp.2010.03.011 ↗
15. Taira S · J J.S.M.E · 1967 · 70 · 587