journal article·2022-03-04Open access

Incorporating the Wilshire equations for time to failure and the minimum creep rate into a continuum damage mechanics for the creep strain of Waspaloy

Mark Evans

Materials at High Temperatures· Volume 39· Issue 2

Abstract

In this paper, a new constitutive model is presented that combines the Wilshire equations with a modified Kachanov-Rabotnov continuum damage mechanics (CDM) to enable the prediction of uniaxial creep curves that contain both a primary and tertiary stage.Another advantage of this approach is that the Wilshire equations have been shown to accurately extrapolate the operational failure times and minimum creep rates from very shortterm tests.This approach also removes the need to estimate the Wilshire time to strain equation at numerous different strains.A simple but multi-step procedure is also introduced for estimating the unknown parameters of this model.When applied to Waspaloy data, the model was shown to represent the shape of the experimental creep curves reasonably well 9especially at low and high strains) and provides reasonable creep curve predictionswith percentages errors averaging around 4-5%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Structural Materials (ISM), Bay Campus, Swansea University, Wales, UK

References (30)

Show source-provided references
1. Ruffles P. · 1995
2. S., Garwood, D., Allen . Materials UK Energy Review: report 1. Energy Materials – Strategic Research Agenda, 2007.
3. 10.1016/j.msea.2006.08.09410.1016/j.msea.2006.08.094 ↗
4. 10.1179/174328407X24577910.1179/174328407X245779 ↗
5. 10.1179/026708310X52052910.1179/026708310X520529 ↗
6. 10.1016/j.apm.2016.07.01310.1016/j.apm.2016.07.013 ↗
7. 10.1179/174328008X25434910.1179/174328008X254349 ↗
8. 10.1016/j.msea.2012.05.02310.1016/j.msea.2012.05.023 ↗
9. 10.3390/ma1001006110.3390/ma10010061 ↗
10. 10.1016/j.ijpvp.2008.04.00210.1016/j.ijpvp.2008.04.002 ↗
11. 10.1016/j.msea.2013.03.03010.1016/j.msea.2013.03.030 ↗
12. 10.3390/ma603111810.3390/ma6031118 ↗
13. 10.1016/j.msea.2012.04.05410.1016/j.msea.2012.04.054 ↗
14. 10.3390/ma807458210.3390/ma8074582 ↗
15. 10.1016/j.ijpvp.2019.03.03210.1016/j.ijpvp.2019.03.032 ↗
16. 10.1016/j.msea.2020.14023110.1016/j.msea.2020.140231 ↗
17. Evans RW, Wilshire B. Introduction to Creep. 1st ed. London: Institute of Materials; 1993. p. 23–28.
18. 10.1179/174328408X36150810.1179/174328408X361508 ↗
19. 10.1098/rspa.2000.053910.1098/rspa.2000.0539 ↗
20. 10.1023/A:101867102200810.1023/A:1018671022008 ↗
21. Rabotnov YN · 1969
22. 10.1016/0013-7944(94)90035-310.1016/0013-7944(94)90035-3 ↗
23. Hayhurst DR. Creep continuum damage mechanics: a unifying theme in high temperature design, High Temperature Structure Design, ESIS 12. Larsson LH, Edited by. Vol. 3, London: Mechanical Engineering Publications; 1992. p. 17–334.
24. 10.1115/1.403270410.1115/1.4032704 ↗
25. 10.1299/jsmea.41.5710.1299/jsmea.41.57 ↗
26. 10.1007/s11661-999-1016-610.1007/s11661-999-1016-6 ↗
27. 10.1016/j.ijpvp.2007.06.00910.1016/j.ijpvp.2007.06.009 ↗
28. Holdsworth SR · High Temp · 2004 · 21 · 125
29. 10.1080/0003684730000000310.1080/00036847300000003 ↗
30. Theil H · 1966