journal article·2010-09

Microstructural investigations of the simulated heat affected zone of the creep resistant steel P91

Ljubica Milović

Materials at High Temperatures· Volume 27· Issue 3
Publisher page

Abstract

The microstructural changes in the heat affected zone (HAZ) of 9% chromium ferritic steel for manufacturing fossil fired power plant components are investigated. The heat treatment region of 925 degrees C in HAZ was tested as a potential location of Type IV cracks which occur during operation. For comparison of characteristics and material behaviour, the microstructural investigation of simulated specimens of HAZ was carried out at room temperature, i.e. 20 degrees C and at an operating temperature of 600 degrees C, using two Types of specimens: with postweld heat treatment (PWHT) and without PWHT. The test results revealed the presence of precipitates at the grain boundaries in specimens simulated at 925 degrees C with subsequent PWHT. These results confirmed that PWHT is necessary for P91 steel to be integrated into components in service under creep condition.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. 10.4028/0-87849-428-6.295410.4028/0-87849-428-6.2954 ↗
2. Dogan B · 2003 · 10
3. 10.1016/j.ijpvp.2007.06.01110.1016/j.ijpvp.2007.06.011 ↗
4. 10.1016/j.ijpvp.2006.09.00310.1016/j.ijpvp.2006.09.003 ↗
5. 10.1016/j.actamat.2006.02.03810.1016/j.actamat.2006.02.038 ↗
6. 10.1016/j.calphad.2007.04.00110.1016/j.calphad.2007.04.001 ↗
7. 10.1016/j.ijpvp.2007.06.01010.1016/j.ijpvp.2007.06.010 ↗
8. 10.1179/174328406X14877810.1179/174328406X148778 ↗
9. 10.1016/S0308-0161(01)00092-810.1016/S0308-0161(01)00092-8 ↗
10. 10.1016/S0308-0161(01)00018-710.1016/S0308-0161(01)00018-7 ↗
11. Ainsworth R.A. · Int. J Press. Vessel. Piping · 2000 · 77 · 869— 876
12. 10.1016/j.ijpvp.2007.06.00510.1016/j.ijpvp.2007.06.005 ↗
13. Dogan B · 2001 · 3
14. 10.1016/j.ijpvp.2007.06.00210.1016/j.ijpvp.2007.06.002 ↗
15. Ceyhan, U. (2006) High temperature deformation and fracture assessment of similar steel welds. DSc thesis.
16. 10.1007/BF0326651610.1007/BF03266516 ↗
17. 10.1016/j.scriptamat.2007.07.00410.1016/j.scriptamat.2007.07.004 ↗
18. Dogan B. · 2003 · 18
19. 10.1016/j.ijpvp.2004.09.00110.1016/j.ijpvp.2004.09.001 ↗
20. 10.1016/j.ijpvp.2006.03.00510.1016/j.ijpvp.2006.03.005 ↗
21. Standard specification for seamless ferritic alloy-steel pipe for high-temperature service, ASTM A 335/A 335M-03 2003.
22. Lj. Milovié · Mater. Manufact. Process · 2008 · 23 · 1
23. Milovié, LJ. (2008) The analysis of integrity of welded components of processing equipment for elevated operating temperatures. DSc thesis.
24. Svobodová„ M. · 2009
25. Cipolla, L. et al. (2005) Production Experience of Tenaris-Dalmine T/P91: microstructure and mechanical properties, creep behaviour and microstructural evolution.Industry and research experience in the use of P91/T91 in HRSG and conventional boilers, London, 1040–1110.
26. 10.2355/isijinternational.44.196610.2355/isijinternational.44.1966 ↗
27. 10.1016/j.ijpvp.2007.06.00810.1016/j.ijpvp.2007.06.008 ↗
28. 10.1046/j.1460-2695.1998.00112.x10.1046/j.1460-2695.1998.00112.x ↗
29. Schwalbe, K-H. et al. (1997) EFAM ETM-MNI 96-The ETM method for assessing the significance of crack-like defects in joints with mechanical heterogeneity (strength mis-match). Report GKSS 97/E/99.
30. Milovié LJ · Struct. Integrity Life · 2008 · 8 · 55
31. Burzié M · Struct. Integrity Life · 2008 · 8 · 41
32. Kurai J. · Struct. Integrity Life · 2007 · 7 · 187