Deformation, diffusion and ductility during creep – continuous void nucleation and creep-fatigue damage
Source abstract
Abstract
It is shown that the assumption of unit (negative) slope in the well known Monkman–Grant plot of time to failure against minimum creep rate is too restrictive. By acknowledging observed slopes in the range 0.8–1, a ductility–strain-rate relation is deduced where ductility decreases with reducing strain rate. This in turn has implications for the ductility exhaustion method as applied during stress relaxation in the dwell period of low cycle fatigue tests of austenitic steels at elevated temperature. The simple method is used to calculate the cyclic creep damage in typical tests on austenitic steels in the region 550–650 °C and is compared to other calculations as employed in the R5 high temperature assessment procedure. The assumption of a uniform nucleation rate of grain boundary voids with creep strain goes some way to predicting the slope of the ductility–strain-rate relation. Both the ‘unconstrained’ and ‘constrained’ (lower shelf) regions of void growth are discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Consultant, Guildford, UK
References (49)
Show source-provided references
1. 10.1243/JMES_JOUR_1966_008_040_0210.1243/JMES_JOUR_1966_008_040_02 ↗
2. Monkman FC · Proc Am Soc Test Mater · 1956 · 56 · 593
3. 10.1080/03063453.1976.1168356010.1080/03063453.1976.11683560 ↗
4. 10.1016/S1359-6462(03)00021-610.1016/S1359-6462(03)00021-6 ↗
5. Evans HE · 1984
6. Pickering HB · 1991 · 17
7. 10.1016/0001-6160(79)90173-110.1016/0001-6160(79)90173-1 ↗
8. 10.1016/0079-6425(82)90001-910.1016/0079-6425(82)90001-9 ↗
9. Blackburn LD · 1972 · 15
10. 10.1111/ffe.1994.17.issue-510.1111/ffe.1994.17.issue-5 ↗
11. 10.1179/03063457679043141710.1179/030634576790431417 ↗
12. 10.1179/cmq.1979.18.1.3110.1179/cmq.1979.18.1.31 ↗
13. 10.1016/S0749-6419(02)00111-010.1016/S0749-6419(02)00111-0 ↗
14. 10.1179/msc.1978.12.4.17210.1179/msc.1978.12.4.172 ↗
15. 10.1080/1478643590824326410.1080/14786435908243264 ↗
16. 10.1016/0001-6160(81)90009-210.1016/0001-6160(81)90009-2 ↗
17. 10.1016/0001-6160(80)90001-210.1016/0001-6160(80)90001-2 ↗
18. 10.1179/03063457579044427010.1179/030634575790444270 ↗
19. RCC-MR. Design and construction rules for mechanical components of FBR nuclear islands, section 1 – subsection Z: technical appendix A3. France: AFCEN; 2002.
20. 10.1179/mht.2004.00710.1179/mht.2004.007 ↗
21. 10.1016/j.ijpvp.2004.09.00310.1016/j.ijpvp.2004.09.003 ↗
22. 10.1016/j.ijpvp.2004.09.00410.1016/j.ijpvp.2004.09.004 ↗
23. 10.1080/1478643670822771110.1080/14786436708227711 ↗
24. 10.1179/03063457579044509910.1179/030634575790445099 ↗
25. 10.1179/msc.1974.8.1.31110.1179/msc.1974.8.1.311 ↗
26. 10.1016/0025-5416(79)90185-X10.1016/0025-5416(79)90185-X ↗
27. Majumdar S · Trans ASME J Eng Technol · 1989 · 111 · 121
28. 10.1016/0001-6160(81)90023-710.1016/0001-6160(81)90023-7 ↗
29. 10.1016/0036-9748(83)90065-010.1016/0036-9748(83)90065-0 ↗
30. 10.1179/msc.1977.11.2.3710.1179/msc.1977.11.2.37 ↗
31. 10.1179/03063458079042630010.1179/030634580790426300 ↗
32. 10.1179/03063453.1979.1167413910.1179/03063453.1979.11674139 ↗
33. 10.1179/03063457579044440510.1179/030634575790444405 ↗
34. 10.1179/msc.1978.12.2.10210.1179/msc.1978.12.2.102 ↗
35. 10.1080/1478643650822494710.1080/14786436508224947 ↗
36. Needham NG · 1983 · 65
37. Needham NG · 1982 · 309
38. Needham NG · 1984 · 1263
39. Chen B · The FESI Bulletin · 2011 · 5 · 16
40. 10.1111/ffe.1983.6.issue-210.1111/ffe.1983.6.issue-2 ↗
41. 10.1111/ffe.1988.11.issue-510.1111/ffe.1988.11.issue-5 ↗
42. Dean DW · 2014
43. Feltham P · J Inst Metals · 1960 · 89 · 210
44. 10.3184/096034008X35732010.3184/096034008X357320 ↗
45. 10.1179/0960340914Z.0000000005110.1179/0960340914Z.00000000051 ↗
46. 10.1179/174328407X24392410.1179/174328407X243924 ↗
47. 10.1520/JAI10380610.1520/JAI103806 ↗
48. 10.1016/0036-9748(85)90224-810.1016/0036-9748(85)90224-8 ↗
49. 10.1016/0921-5093(89)90360-210.1016/0921-5093(89)90360-2 ↗