Evaluation of crack-tip parameters for characterizing creep crack growth: Results of the ASTM round-robin programme
Source abstract
Abstract
The results of a round-robin programme to evaluate crack-tip parameters such as K, C* and Ct for characterizing creep crack growth behaviour are presented. The programme was sponsored by the E24 Committee on Fracture Mechanics Test Methods of the American Society for Testing and Materials (ASTM). The tests were made on a 1Cr-1Mo-0.25V turbine rotor steel (ASTM grade A470 class 8) and included specimens of two thicknesses from the compact type (CT) and the centre crack tension (CCT) geometries. The test temperatures were 538°C and 593°C (1000°F and 1100°F). All tests were found to be in the extensive creep regime where the C*-integral and the Ct parameter are identical. It was shown that all creep crack growth data from CT specimens correlated uniquely with the C*-integral or the Ct parameter and no unique correlation was found between creep crack growth rate and K. The creep crack growth rates in 6.3 mm (0.25 in) plane-sided CT specimens were about two to three times slower than those in 25.4 mm (1 in) thick specimens with 25% sidegrooves. These differences are most likely to be due to the differences in the state of stress at the crack tip, which can vary with thickness. Differences were found between the creep crack growth rates from the CT and CCT geometries at equal values of C* or Ct. These differences were attributed to the differences in the thicknesses of the specimens from the two geometries and also due to possible loss of dominance of the singular crack tip stress fields in the CCT specimens. The creep crack growth data obtained under this programme compared well with that from a Japanese programme that used a similar material. Several issues with regard to test-method standardization are also discussed in this paper.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Probabilistic and Robust Engineering Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. 10.1007/BF0004186210.1007/BF00041862 ↗
2. 10.1016/0013-7944(71)90055-510.1016/0013-7944(71)90055-5 ↗
3. Landes J. D. · 1976 · 128
4. Nikbin K. M. · 1976 · 47
5. 10.1115/1.344366810.1115/1.3443668 ↗
6. 10.1007/BF0266175410.1007/BF02661754 ↗
7. Saxena A. · 1980 · 131
8. 10.1520/STP36967S10.1520/STP36967S ↗
9. 10.1016/0020-7683(81)90055-X10.1016/0020-7683(81)90055-X ↗
10. 10.1007/BF0003619210.1007/BF00036192 ↗
11. McMeeking, R. M. and Leckie, F. A. in ‘Advances in Fracture Research, Proc. 5th Int Conf. Fracture’, Pergamon Press (1981) pp. 699–704
12. 10.1016/0020-7683(75)90031-110.1016/0020-7683(75)90031-1 ↗
13. Saxena A. · 1986 · 185
14. 10.1007/BF0002069310.1007/BF00020693 ↗
15. Saxena A. · 1986
16. Saxena, A. and Landes, J. D. in ‘Advances in Fracture Research’ (Eds. P. Rama Rao et al.) Pergamon Press (1984) pp. 3977–3988
17. ‘Standard Method for Measurement of Creep Crack Growth Rates in Metals—Draft 4’, American Society for Testing and Materials (April 1991)
18. 10.1111/j.1460-2695.1987.tb01154.x10.1111/j.1460-2695.1987.tb01154.x ↗
19. 10.1007/BF0004441410.1007/BF00044414 ↗
20. 10.1007/BF0001720410.1007/BF00017204 ↗
21. 10.1007/BF0004199710.1007/BF00041997 ↗
22. Bassani J. L. · 1989 · 7
23. Swaminathan V. P. · 1981
24. 1980 · 332
25. Johnson H. H. · Mater. Res. Standards · 1965 · 5 · 442
26. 10.1016/0013-7944(80)90005-310.1016/0013-7944(80)90005-3 ↗
27. 1982 · 772
28. Leung C. P. · 1989 · 7
29. Shih C. F. · 1991
30. McMeeking R. M. · 1979 · 175
31. Tabuchi, M., Yagi, K., Kubo, K. and Tanaka, C. in ‘Creep and Fracture of Engineering Materials and Structures: Proc. 4th Int Conf.’ (1–6 April 1990) (Eds. B. Wilshire and R. W. Evans) The Institute of Metals, London, pp. 729–738
32. 10.1520/JTE11702J10.1520/JTE11702J ↗