Creep-fatigue interaction behaviour in Sanicro 25
Source abstract
Abstract
Sanicro 25 is a heat-resistant steel with high performances used in the advanced ultra-super critical power plants. This paper provides a discussion on the creep-fatigue interaction behaviours of this steel with different strain ranges and dwell times at 700°C. The influences of dwell time on the cyclic deformation behaviours and life time have been evaluated. Increase of dwell time will generally decrease number of cycles but increase the time to failure. The influence of dwell time at a large strain on the life cycle is small. Dwell time can significantly impact both the initiation and propagation of cracks during a creep-fatigue interaction process, resulting in more intergranular cracking. The influences of dwell time on the cyclic plastic deformation, precipitation behaviour, recovery phenomena, and crack initiation and propagation have also been discussed. Fracture investigations show that dwell time results in more intergranular cracking.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Mechanical Failure Analysis and Simulation · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Linköping University
SSAB Special Steels, Product Development Department
RIAM, Technolgy, China
Chengdu University
References (12)
Show source-provided references
1. 10.1007/s12666-013-0301-710.1007/s12666-013-0301-7 ↗
2. Blum R, Vanstone RW, Messelier-Gouze C. Materials development for boilers and steam turbines operating at 700°C. In: Proc. 4th Int. Conf. on Adv. in Mater. Technol. for Fossil Power Plant; Hilton Head Island, South Carolina, USA; 2004. p. 116.
3. 10.1016/j.ijpvp.2006.08.00610.1016/j.ijpvp.2006.08.006 ↗
4. Rautio R, Bruce S. Sandvik Sanicro 25, a new material for ultra supercritical coal fired boilers. In: Proc. 4th Int. Conf. on Adv. in Mater. Technol. for fossil power plants; Hilton Head Island, South Carolina, USA; 2004. p. 274.
5. Chai G, Nilsson JO, Boström M, et al. Advanced heat resistant austenitic stainless steels. Proc ICAS 2011. 2013;2010:56.
6. 10.1016/j.proeng.2013.03.24810.1016/j.proeng.2013.03.248 ↗
7. Polák J, Petráš R, Heczko M, et al. On the origin of extraordinary cyclic strengthening of the austenitic stainless-steel Sanicro 25 during fatigue at 700°C. Mat Sci Eng A. 2014;615:175.
8. 10.1016/j.ijfatigue.2015.03.01510.1016/j.ijfatigue.2015.03.015 ↗
9. 10.3139/147.11027210.3139/147.110272 ↗
10. 10.1007/s11837-013-0678-010.1007/s11837-013-0678-0 ↗
11. 10.1016/j.actamat.2014.04.01810.1016/j.actamat.2014.04.018 ↗
12. Jetter J. Class 1 components in Companion Guide to the ASME Boiler and pressure vessel code. 3rd ed. Vol 1. Three Park Avenue New York (NY) 10016–5990: ASME; 2007. p. 409 445.