journal article·2014-11

Generation of intergranular strains during high temperature creep fatigue loading of 316H stainless steel

A. A. Mamun, R J. Moat, J. Kelleher, P. J. Bouchard

Materials at High Temperatures· Volume 31· Issue 4
Publisher page

Abstract

This paper investigates the development of intergranular strains and stresses in AISI type 316H austenitic stainless steel during cyclic loading at high temperature. Isothermal cyclic creep tests at 650°C with 2 h displacement controlled creep dwells at maximum strain are conducted with in situ neutron diffraction monitoring at a time of flight facility. The evolution of intergranular strains in five independent {hkl} grain families were successfully measured during consecutive cycles. The grain family with {111} lattice planes normal to the loading direction exhibited linearly reversible behaviour with cyclic load whereas the {200} planes deformed in a non-linear manner forming a hysteresis loop. Intergranular strains during the first dwell remained unchanged with time, but relaxed with time during later dwells. The start of dwell intergranular strains increased from cycle 1 to cycle 2, but markedly less moving from cycle 2 to cycle 3.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. 10.3184/096034013X1371727141589810.3184/096034013X13717271415898 ↗
2. 10.1016/j.engfracmech.2013.08.00610.1016/j.engfracmech.2013.08.006 ↗
3. Rao A: ‘Creep and anelastic deformation in austenitic steels’, PhD thesis, The Open University, Milton keynes, UK, 2010.
4. 10.1016/j.actamat.2012.08.06010.1016/j.actamat.2012.08.060 ↗
5. 10.1016/S1359-6454(99)00222-010.1016/S1359-6454(99)00222-0 ↗
6. 10.1016/0001-6160(83)90007-X10.1016/0001-6160(83)90007-X ↗
7. 10.1016/0001-6160(84)90106-810.1016/0001-6160(84)90106-8 ↗
8. 10.1016/S0013-7944(03)00018-310.1016/S0013-7944(03)00018-3 ↗
9. 10.1016/0001-6160(83)90082-210.1016/0001-6160(83)90082-2 ↗
10. 10.1007/BF0248140110.1007/BF02481401 ↗
11. 10.1107/S002188980604224510.1107/S0021889806042245 ↗
12. 10.1007/s11661-006-0129-410.1007/s11661-006-0129-4 ↗
13. Hutchings MT, Withers PJ, Holden TM and Lorentzen T: ‘Introduction to the characterisation of residual stresses by neutron diffraction’, 2005, London, Taylor and Francis.10.1201/9780203402818 ↗
14. Fitzpatrick ME and Lodini A (eds.): ‘Analysis of residual stress by diffraction using neutron and synchroton radiation’, 2003, London, Taylor and Francis.10.1201/9780203608999 ↗
15. 10.1016/j.actamat.2013.05.01710.1016/j.actamat.2013.05.017 ↗
16. 10.1016/S1359-6454(99)00382-110.1016/S1359-6454(99)00382-1 ↗