The impact of increasing demand for efficiency and reliability on the performance of waste-to-energy plants
Source abstract
Abstract
Waste-to-energy achieves two main objectives, the reduction in volume of waste and the recovery of energy. Volume reduction of waste is part of waste management while the use of waste as a fuel presents the opportunity to obtain electrical power and heat, thereby reducing the consumption of fossil fuels. The efficiency of waste-to-energy plants is therefore of considerable interest and substantial efforts are being made to maximize energy output from many plants. Plant efficiency can be considered in a number of ways and certain factors impose restrictions on the degrees of freedom when trying to achieve greater energy recovery. First and foremost, a waste incinerator is a tool within waste management and thus the waste (fuel) usually cannot be selected for composition and consistency. The provider of the operating license, the local authority, sends most of the waste to the incinerator. The operator usually has little scope to choose the waste stream, and consequently the energy input (calorific value of the waste) can vary and as a result will influence the steam parameters. However, regardless of the amount of energy recovered, very stringent limits on emissions to the environment must be respected as well as the pure waste management aspects. This paper addresses the main technical challenges facing waste-to-energy plant operators and the difficult balancing act that must be achieved between plant emissions, reliability and efficiency.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermochemical Biomass Conversion Processes · Combustion and flame dynamics · Combustion and Detonation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Council Directive 1999/31/EC of 26 April 1999 on the Landfill of Waste, The Official Journal of the European Communities No. L182 of 16.7.99, pp 1-19 (1999).
2. Resolution on the Commission Communication Energy for the Future: Renewable Sources of Energy-White Paper for Community Strategy and Action Plan, COM (97)0599-C4-0047/98, C210 of 6.7.98, p.215 (1998).
3. Resolution on the Commission Communication Strategy to promote Combined Heat and Power and to dismantle barriers to its develop-ment, COM (97)0514-C4-0596/97, The Official Journal of the European Communities No. C167 of 1.6.98, p.308 (1998).
4. Directive 2000/76/EC of the European Parliament and Council of 4 December 2000 on the Incineration of Waste, The Official Journal of the European Communities No. L332 of 28.12. 2000, pp.91-111 (2000).
5. Council Directive 96/61/EC of 26 September 1996 concerning Integrated Pollution Prevention and Control, The Official Journal of the European Communities No. L257 of 10.10.96, pp.26-40 (1996).
6. PREWIN, the European Network for Performance, Reliability and Emissions Reduction in Waste Incinerators. JRC Annual Report for the Institute for Advanced Materials, 2000, EUR 20113 EN (2000).
7. Quaak, P. Knoef, H. and Stassen, H. Energy from Biomass. A Review of Combustion and Gasification Technologies. Report 422, World Bank Technical Paper Energy Series, The World Bank, Washington, DC (19?).
8. Johnke, B. and Gamer, M. First Draft of a German Report with basic information for a BREF-Document Waste Incineration (19?)
9. Yang, Y. B., Goh, YR., Nasserzadeh, V. and Swithenbank, J. Mathematical modelling of solid combustion on a travelling bed and the effect of channelling. Proc. 3rd Symp. Incineration and flue Gas Treatment Technologies, July 1-4, Brussels, pp.1-16 (2001)
10. 10.1016/0956-053X(91)90072-D10.1016/0956-053X(91)90072-D ↗
11. Juniper Database, Juniper Consultancy Services Limited, ISBN: 1 903535 026, (2000).
12. Smith G. D. · 1989
13. Ganesan P. · Industrial Heating · 1987 · 54 · 18
14. Meadowcroft D. B · 1994 · pp.1413
15. Haggblom E. · 1990 · pp. 92
16. Bryers R. W · fouling and high temperature corrosion of heat transfer surfaces due to impurities in steam raising fuels. Prog.Energy Combustion Sci. · 1996 · 22 · 29
17. 10.1007/BF0266855910.1007/BF02668559 ↗
18. 10.1002/maco.1990041060210.1002/maco.19900410602 ↗
19. Kawahara Y · Mater.High Temp. · 1997 · 14 · 26110.1080/09603409.1997.11689552 ↗
20. Miller P. D. · 1972 · pp.83
21. TESTCORR, Code of Practice for Discontinuous corrosion testing in high temperature atmospheres, European Commission Contract No. SMT4-CT95-2001, March (2001).
22. Wilson, A., Forsburg, U., Lundberg, M. and Nylof, L. Composite tubes experience in waste incineration boilers. Stainless Steel World 99 Conference, November 16-18, 1999, The Hague, KCI Publishing, pp.669-678 (1999)
23. Kawahara Y. · 2000
24. Lai G. · 2000
25. Takeuchi Y. · 2000
26. Bartel, P. Private communication, concerning the SOLCOATTm, refractory coating of furnace components, BG Systems, Czech Republic.
27. Metschke, J. and Krüger, J. Private communication, concerning the low-pressure water on-line Shower Cleaning System at the Schwandorf waste incinerator, Germany.