Internal carburization and scale formation on austenitic steels in supercritical carbon dioxide
Source abstract
Abstract
Direct-fired supercritical CO2 (sCO2) power cycles are being commercialised to revolutionise fossil energy as a low-emission power source. To lower the cost of this technology, less expensive steels are needed in the lower temperature segments of the cycle. However, there are concerns about internal carburisation of steels in sCO2.Footnote1 A consistent observation is that thin, Cr-rich oxides appear to reduce C ingress compared to thick Fe-rich oxides formed on 9–12% Cr ferritic-martensitic steels. Advanced austenitic stainless steels (SS) like alloy 709 (20Cr-25Ni) are able to continue to form Cr-rich oxides at 650°C, while a conventional type 316 H SS formed a Fe-rich scale. The C diffusion profiles in SS specimens were quantified at 550°C–650°C using glow discharge optical emission spectroscopy and electron probe microanalysis. Analytical transmission electron microscopy was used to compare the thin protective Cr-rich oxide formed on alloy 709 in sCO2 at 650°C to that formed in ambient air.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metallurgical and Alloy Processes · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN, USA
Funding
U.S. Department of Energy, Office of Fossil Energy and Carbon Management, Advanced Materials Program
References (42)
Show source-provided references
1. 10.13182/NT06-A373410.13182/NT06-A3734 ↗
2. 10.1016/j.rser.2010.07.00610.1016/j.rser.2010.07.006 ↗
3. 10.1016/j.apenergy.2013.06.02010.1016/j.apenergy.2013.06.020 ↗
4. 10.1016/j.egypro.2013.05.21110.1016/j.egypro.2013.05.211 ↗
5. 10.1016/j.egypro.2017.03.173110.1016/j.egypro.2017.03.1731 ↗
6. 10.1016/0013-7480(68)90105-810.1016/0013-7480(68)90105-8 ↗
7. 10.1007/s11085-015-9589-510.1007/s11085-015-9589-5 ↗
8. 10.1007/s11837-015-1661-810.1007/s11837-015-1661-8 ↗
9. 10.1007/s11085-016-9654-810.1007/s11085-016-9654-8 ↗
10. 10.1002/maco.20150878310.1002/maco.201508783 ↗
11. 10.1007/s11837-018-2952-710.1007/s11837-018-2952-7 ↗
12. 10.1007/s11085-017-9820-710.1007/s11085-017-9820-7 ↗
13. 10.1002/maco.20181065210.1002/maco.201810652 ↗
14. 10.1007/s11085-020-10004-910.1007/s11085-020-10004-9 ↗
15. 10.5006/0010-9312-21.3.8410.5006/0010-9312-21.3.84 ↗
16. 10.1016/0022-3115(65)90087-510.1016/0022-3115(65)90087-5 ↗
17. 10.1149/1.242662210.1149/1.2426622 ↗
18. 10.1007/BF0060360910.1007/BF00603609 ↗
19. 10.1007/BF0073838510.1007/BF00738385 ↗
20. Dodds P. Developing new reactors: learning the lessons of the past. Nuclear Energy. 2004;43(6):331–336.
21. Rowlands PC, Garrett JCP, Popple LA, et al. The oxidation performance of Magnox and advanced gas-cooled reactor steels in high pressure CO2. Nuclear Energy. 1986;25:267–275.
22. 10.1016/j.actamat.2017.02.03410.1016/j.actamat.2017.02.034 ↗
23. 10.1016/j.supflu.2016.07.02210.1016/j.supflu.2016.07.022 ↗
24. Shingledecker JP, Pint BA, Sabau AS, et al. Managing steam-side oxidation and exfoliation in USC boiler tubes. Adv Mater Process. 2013;171(1):23–25.
25. 10.1016/j.corsci.2011.06.00210.1016/j.corsci.2011.06.002 ↗
26. 10.1016/j.pnucene.2011.04.03010.1016/j.pnucene.2011.04.030 ↗
27. 10.1016/j.corsci.2012.03.02910.1016/j.corsci.2012.03.029 ↗
28. 10.1002/maco.20100567510.1002/maco.201005675 ↗
29. 10.1016/j.corsci.2013.08.00810.1016/j.corsci.2013.08.008 ↗
30. Pint BA Pillai R Keiser JR Compatibility of steels in supercritical CO 2 at 450°-650°C. NACE Paper C2021-16724 Houston TX 2021.
31. Pint BA Pillai R Keiser JR Effect of supercritical CO 2 on steel ductility at 450°-650°C. ASME Paper #GT2021-59383 for Turbo Expo 2021 Virtual Conference and Exhibition 2021.10.1115/GT2021-59383 ↗
32. Pint BA Lance MJ Pillai R et al. Compatibility of steels at 450°-650°C in supercritical CO 2 with O 2 and H 2 O additions. AMPP Paper C2022-18018 Houston TX 2022.
33. Lance MJ, Leonard DN, Pint BA The use of glow discharge optical emission spectroscopy to quantify internal carburization in supercritical CO2. in Proceedings of the 6th International Symposium on Supercritical CO2 Power Cycles, Pittsburgh, PA, March 2018, Paper #117.
34. Su YF Stack PIM Stephens CJ et al. Quantifying high temperature corrosion. NACE Paper C2021-16805 Houston TX 2021.
35. 10.1007/BF0066705710.1007/BF00667057 ↗
36. 10.5006/1.362868310.5006/1.3628683 ↗
37. Pint BA, Pearson SR, De Las Casas Aranda R, et al. Water chemistry and pressure effects on steam oxidation of ferritic and austenitic steels. In: Shingledecker J Takeyama M, editors Proceedings of the joint EPRI – 123HiMAT international conference on advances in high temperature materials. Materials Park, OH: ASM International; 2019. pp. 939–947.
38. 10.1016/j.pmatsci.2007.11.00110.1016/j.pmatsci.2007.11.001 ↗
39. 10.1016/j.scriptamat.2014.01.00910.1016/j.scriptamat.2014.01.009 ↗
40. 10.1007/s11837-018-2963-410.1007/s11837-018-2963-4 ↗
41. 10.1080/09603409.2017.138937110.1080/09603409.2017.1389371 ↗
42. 10.1016/j.corsci.2015.03.01910.1016/j.corsci.2015.03.019 ↗