Coupled DRX and SRX-induced gradient microstructure in thermally compressed double-frustum specimens
Source abstract
Abstract
For the requirements of special gradient service environments, it is critical to fabricate high-temperature structural components with micron-scale gradient microstructures. The double-frustum specimens with different top diameters were designed to achieve a gradient distribution of microstructure and properties along the edge to the centre by thermal compression. The hot compression of double-frustum specimens at 1050°C, 1 s−1, directly leads to a gradient strain distribution. The thermal deformation samples show a low degree of recrystallisation in all regions of the samples under the effect of dynamic recrystallisation. Additional holding for 30 s after deformation and sufficient static recrystallisation increase recrystallisation degrees in all regions of the Φ10 sample. The samples showed an almost linear gradient distribution of grain size and hardness along the radial direction from the centre to the edges. The average grain size ranges from 22.82 to 10.49 μm, and the hardness ranges from 260.1 to 352.4 HV.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Hengpu (Ningbo) Laser Technology Co
Southeast University
Hokkaido University
Jiangsu University
Funding
State Key Lab of Advanced Metals and Materials in University of Science and Technology Beijing · Natural Science Foundation of Jiangsu Province
References (33)
Show source-provided references
1. 10.1016/j.matdes.2012.10.00110.1016/j.matdes.2012.10.001 ↗
2. 10.1016/j.pmatsci.2018.10.00410.1016/j.pmatsci.2018.10.004 ↗
3. 10.1016/j.scriptamat.2018.03.00710.1016/j.scriptamat.2018.03.007 ↗
4. 10.1016/j.msea.2011.03.03910.1016/j.msea.2011.03.039 ↗
5. 10.1016/S1006-706X(06)60097-610.1016/S1006-706X(06)60097-6 ↗
6. 10.1016/j.jmatprotec.2021.11714210.1016/j.jmatprotec.2021.117142 ↗
7. 10.1073/pnas.132406911110.1073/pnas.1324069111 ↗
8. 10.1080/21663831.2014.93582110.1080/21663831.2014.935821 ↗
9. 10.1016/j.matdes.2016.05.01510.1016/j.matdes.2016.05.015 ↗
10. 10.1016/j.msea.2022.14291610.1016/j.msea.2022.142916 ↗
11. 10.1016/j.msea.2017.11.10710.1016/j.msea.2017.11.107 ↗
12. 10.1016/j.engfracmech.2019.01.03710.1016/j.engfracmech.2019.01.037 ↗
13. 10.1016/j.matdes.2018.01.05510.1016/j.matdes.2018.01.055 ↗
14. 10.1016/j.msea.2017.07.02310.1016/j.msea.2017.07.023 ↗
15. 10.1016/j.msea.2003.10.26110.1016/j.msea.2003.10.261 ↗
16. 10.1016/j.matdes.2014.08.00210.1016/j.matdes.2014.08.002 ↗
17. 10.1016/j.actamat.2016.04.04510.1016/j.actamat.2016.04.045 ↗
18. 10.1016/j.scriptamat.2018.04.03910.1016/j.scriptamat.2018.04.039 ↗
19. 10.1016/j.jmapro.2018.04.00310.1016/j.jmapro.2018.04.003 ↗
20. 10.1016/j.matlet.2017.12.02110.1016/j.matlet.2017.12.021 ↗
21. 10.1016/j.msea.2013.12.07910.1016/j.msea.2013.12.079 ↗
22. 10.1016/j.actamat.2018.09.00710.1016/j.actamat.2018.09.007 ↗
23. 10.1016/j.scriptamat.2007.07.03310.1016/j.scriptamat.2007.07.033 ↗
24. 10.3390/ma1401011110.3390/ma14010111 ↗
25. Antolovich BF, Evans MD. Predicting grain size evolution of Udimet alloy 718 during the “cogging” process through use of numerical analysis. In: Pollock TM, Kissinger RD, Bowman RR, Green KA, McLean M, Olson S Schirra JJ, editors. Superalloys 2000. Warrendale, PA: TMS (The Minerals, Metals & Materials Society); 2000. p. 39–47.
26. 10.1080/01495739.2024.242894110.1080/01495739.2024.2428941 ↗
27. 10.1016/j.actamat.2022.11819010.1016/j.actamat.2022.118190 ↗
28. 10.1007/s11661-021-06478-010.1007/s11661-021-06478-0 ↗
29. 10.1016/j.jmrt.2022.10.07810.1016/j.jmrt.2022.10.078 ↗
30. 10.1016/j.msea.2022.14333810.1016/j.msea.2022.143338 ↗
31. 10.1016/j.jallcom.2022.16723610.1016/j.jallcom.2022.167236 ↗
32. 10.1016/j.msea.2017.08.10110.1016/j.msea.2017.08.101 ↗
33. 10.1016/j.jmatprotec.2006.12.03110.1016/j.jmatprotec.2006.12.031 ↗