Phase transformation behaviour of creep-strength enhanced 9%Cr steels
Source abstract
Abstract
The phase transformation behaviour of Grade 92 steel has been investigated using differential thermal analysis (DTA) and hardness measurements. In our DTA experiments, disk-shaped samples were normalized at 1070°C and then tempered at temperatures between +10 and −40°C from the ferrite-to- austenite transformation temperature of 878°C (Ac1) at a rate of 30°C/min. From the DTA heating curve during normalization, the magnetic transition and Ac1 transformation were found to occur at 744 and 778°C, respectively. Two overlapping exothermic peaks corresponding to the magnetic transition and the formation of ferrite from austenite were observed in the temperature range 700 – 800°C in the DTA cooling curves after tempering at temperatures between −10 and +10°C from Ac1. The hardness values measured after the DTA experiments decreased with increasing tempering temperature up to around Ac1−15°C and then increased slightly with increasing temperature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.