journal article·2003-01

Simulation of road salt corrosion in austenitic alloys for automotive exhaust systems

L. Antoni, R. Bousquet, J.H. Davidson

Materials at High Temperatures· Volume 20· Issue 4
Publisher page

Abstract

Cyclic oxidation tests in air with intermittent salt spraying have been performed to simulate the conditions of road salt (NaCl–CaCl2) enhanced corrosion in automotive exhaust systems.Tests were carried out at 600 and 700°C on three austenitic alloys, including two stainless steels currently employed for exhaust components (AISI 316 Ti and AISI 302B) and a higher nickel heat resisting alloy.The presence of salt causes internal corrosion, both along a regular front beneath an outer oxide scale and down alloy grain boundaries. An increase in temperature accelerates the corrosion rate and particularly enhances intergranular penetration.The results of micrographic and microanalytical investigations are in general agreement with an active oxidation mechanism in which NaxClx vapour species, and not only chlorine, appear to play an important role. The regions directly affected are depleted in chromium and iron and enriched in nickel.Although internal oxidation of silicon is observed, a high silicon content (2%) does not necessarily ensure effective protection against this type of attack.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Smart Materials for Construction · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Arcelor Innovation1Ugine-Savoie Imphy, Centre de Recherches d’Ugine, Avenue Paul Girod, F-73403 Ugine Cedex, France

Imphy Ugine Précision, Centre de Recherches d’Imphy, F-58160 Imphy, France

References (10)

Show source-provided references
1. Antoni L. and Herbelin J. M. Advantages of ferritic stainless steels in cyclic high temperature conditions. Cyclic Oxidation of High Temperature Materials, EFC N° 27, M. Schiitze, W. J. Quaddakkers, Eds., The Institute of Materials, London, (1999) 187–197.
2. 10.1016/0010-938X(95)00011-810.1016/0010-938X(95)00011-8 ↗
3. Berztiss D., Sahs A., Schneider A., Spiegel M., Viefhaus H. and Grabke H. J. Role of carbides in the high temperature corrosion of steels in HC1-containing atmospheres. Z. Metallkunde, 90 (1), 4-12 (1999).
4. 10.1002/(SICI)1521-4176(199910)50:10<561::AID-MACO561>3.0.CO;2-L10.1002/(SICI)1521-4176(199910)50:10<561::AID-MACO561>3.0.CO;2-L ↗
5. 10.1016/S0010-938X(99)00142-010.1016/S0010-938X(99)00142-0 ↗
6. Zahs A., Spiegel M. and Grabke H. J. Chlorine-induced corrosion of iron, chromium, nickel and their alloys in oxidizing atmospheres. Proc. Eurocorr '99, 30 August-2 September 1999, Aachen, Germany (1999).
7. 10.1002/(SICI)1521-4176(200001)51:1<34::AID-MACO34>3.0.CO;2-010.1002/(SICI)1521-4176(200001)51:1<34::AID-MACO34>3.0.CO;2-0 ↗
8. 10.1002/(SICI)1521-4176(200002)51:2<73::AID-MACO73>3.0.CO;2-V10.1002/(SICI)1521-4176(200002)51:2<73::AID-MACO73>3.0.CO;2-V ↗
9. 10.1002/(SICI)1521-4176(200003)51:3<161::AID-MACO161>3.0.CO;2-F10.1002/(SICI)1521-4176(200003)51:3<161::AID-MACO161>3.0.CO;2-F ↗
10. 10.1179/mht.2000.17.2.02110.1179/mht.2000.17.2.021 ↗