Small punch and uniaxial creep fracture behaviours of modified SUS304H steel at various temperatures
Source abstract
Abstract
Commercial austenitic stainless steel SUS304H with small amount of vanadium addition was used in this study. Small punch (SP) creep and uniaxial tensile creep tests were conducted at 650, 700, and 750 °C to measure creep lives and the minimum displacement rates or the minimum creep strain rates. The measured parameters were compared between the two test methods, seeking empirical relationships among the parameters using Larson-Miller Parameter and Monkman-Grant relation. Magnitude of the applied stress (MPa) in the uniaxial tensile creep test was approximately equal to the applied load value (N) in the SP creep test at all test temperatures. It was shown that during the creep deformation of the SP creep specimen, crack initiation and accompanying crack growth occur simultaneously. Competing failure mechanisms of creep deformation and crack growth may affect the SP creep life and consequently determine the proportionality function, α, in the relation between the SP load and the tensile creep rupture stress in creep tests.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fire effects on concrete materials · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Chung Ang University, Seoul, Korea
Analysis and Assessment Center, Research Institute of Industrial Science and Technology (RIST), Pohang, Korea
Funding
Korea Institute of Energy Technology Evaluation and Planning · National Research Foundation of Korea
References (26)
Show source-provided references
1. Viswanathan R · 198910.31399/asm.tb.dmlahtc.9781627083409 ↗
2. 10.1016/0022-3115(82)90820-010.1016/0022-3115(82)90820-0 ↗
3. Parker JD · ASME PVP · 1994 · 279 · 167
4. Parker JD · Manag Life Perform · 1998 · 2 · 477
5. 10.1016/S0921-5093(01)01975-X10.1016/S0921-5093(01)01975-X ↗
6. 10.1016/j.ijpvp.2006.07.00910.1016/j.ijpvp.2006.07.009 ↗
7. 10.1520/JTE12102J10.1520/JTE12102J ↗
8. 10.1016/j.msea.2008.04.13210.1016/j.msea.2008.04.132 ↗
9. 10.3184/096034010X1281452197339210.3184/096034010X12814521973392 ↗
10. 10.1520/JTE1225010.1520/JTE12250 ↗
11. Yoon KB · Trans KSME (A) · 2001 · 25 · 1493
12. Park TG · Trans KSME (A) · 2002 · 26 · 171
13. 10.1111/ffe.2009.32.issue-1210.1111/ffe.2009.32.issue-12 ↗
14. 10.1007/s12206-010-0327-210.1007/s12206-010-0327-2 ↗
15. 10.1016/j.ijpvp.2009.04.00510.1016/j.ijpvp.2009.04.005 ↗
16. 10.1080/13599379934903610.1080/135993799349036 ↗
17. 10.1179/174892408X38286010.1179/174892408X382860 ↗
18. Zieliński A · J Achieve Mater Manu Eng · 2012 · 55 · 403
19. 10.3184/096034012X1331663378575710.3184/096034012X13316633785757 ↗
20. 10.1016/j.msea.2010.04.01810.1016/j.msea.2010.04.018 ↗
21. 10.1016/j.matdes.2013.02.04310.1016/j.matdes.2013.02.043 ↗
22. 10.1016/j.jallcom.2013.05.10610.1016/j.jallcom.2013.05.106 ↗
23. 10.1080/09603409.2016.122790910.1080/09603409.2016.1227909 ↗
24. 10.3176/eng.2010.3.0410.3176/eng.2010.3.04 ↗
25. Sturm R · Mater Technol · 2004 · 38 · 6
26. 10.1299/jmmp.4.7510.1299/jmmp.4.75 ↗