journal article·2020-03-03

Comparative evaluation of tensile properties of simulated heat affected zones of P91 steel weld joint

Mariappan K., Vani Shankar, Bhaduri A. K.

Materials at High Temperatures· Volume 37· Issue 2
Publisher page

Abstract

The present work aims to understand the contribution made by each heat affected zone (HAZ) to the overall tensile behavior of the P91 steel weld joint. The three principal microstructures of heat-affected zones such as inter-critical (IC), fine grain (FG) and coarse grain (CG) were simulated through isothermal furnace heat treatments at 1138 K, 1208 K and 1473 K respectively. The simulated microstructures predominantly developed tempered martensite after oil quenching followed by tempering. The grain size and hardness across the P91steel weld joint vary in a complex manner. Tensile tests were carried out on each simulated HAZ and actual weld joint at 823K and a strain rate of 3 × 10-3 s-1. The weld joint specimen has failed in the base metal region. An increase in microhardness at the ICHAZ was found after tensile deformation. Higher initial strain/work hardening behavior of soft ICHAZ attributes the shifting of strain localization, consequently failure at the base metal.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Homi Bhabha National Institute, Indira Gandhi Centre for Atomic Research, Kalpakkam, India

References (51)

Show source-provided references
1. 10.1016/j.ijplas.2012.04.00410.1016/j.ijplas.2012.04.004 ↗
2. 10.1007/s11661-011-0884-810.1007/s11661-011-0884-8 ↗
3. 10.1016/0029-5493(93)90016-310.1016/0029-5493(93)90016-3 ↗
4. 10.1361/10599490177034503310.1361/105994901770345033 ↗
5. 10.1007/s11661-004-0299-x10.1007/s11661-004-0299-x ↗
6. 10.1016/j.jnucmat.2010.02.01010.1016/j.jnucmat.2010.02.010 ↗
7. Ellis FV, Viswanathan R. Review of type IV cracking in piping welds, in: integrity of high temperature welds. London: Professional Publishing Ltd; 1998. p. 125–134.
8. 10.1007/978-3-642-23348-7_410.1007/978-3-642-23348-7_4 ↗
9. 10.1179/stw.1996.1.1.3610.1179/stw.1996.1.1.36 ↗
10. 10.1007/s11661-006-9050-010.1007/s11661-006-9050-0 ↗
11. 10.3184/096034010X1281980101495810.3184/096034010X12819801014958 ↗
12. 10.1179/174329306X12070510.1179/174329306X120705 ↗
13. 10.1016/j.actamat.2013.10.00110.1016/j.actamat.2013.10.001 ↗
14. 10.1016/j.jmatprotec.2016.05.01110.1016/j.jmatprotec.2016.05.011 ↗
15. 10.1002/srin.20170042710.1002/srin.201700427 ↗
16. 10.1080/0950711960954903010.1080/09507119609549030 ↗
17. Laha K, Tensile and creep behavior of similar and dissimilar weld joints of Cr-Mo steels, PhD Thesis, Indian Institute of Science. Bangalore, India, 1998.
18. 10.1179/02670830110151021210.1179/026708301101510212 ↗
19. 10.1016/j.proeng.2013.03.23110.1016/j.proeng.2013.03.231 ↗
20. 10.1016/j.mspro.2015.04.17810.1016/j.mspro.2015.04.178 ↗
21. Celin R · Mater Tech · 2016 · 50 · 455
22. Taniguchi G · Kobelco Techol Rev · 2013 · 2
23. Silwal B · Weld J · 2013 · 92 · 80
24. Newell
25. 10.1016/0308-0161(94)90125-210.1016/0308-0161(94)90125-2 ↗
26. Leijun L. Effect of post-weld heat treatment on creep rupture properties of grade 91 steel heavy section welds, reactor concepts RD&D. Utah State University; 2012, (Project No. 09-799).
27. Singh DP · Int J Res Mech Eng Technol · 2013 · 3 · 216
28. Khajuria A · Int J Mod Manuf Tech · 2018 · 10 · 50
29. 10.3390/met501013110.3390/met5010131 ↗
30. 10.1016/j.proeng.2013.03.27110.1016/j.proeng.2013.03.271 ↗
31. 10.1007/s11661-008-9687-y10.1007/s11661-008-9687-y ↗
32. 10.1016/j.actamat.2005.11.00110.1016/j.actamat.2005.11.001 ↗
33. 10.1007/BF0267044310.1007/BF02670443 ↗
34. 10.1016/j.msea.2008.08.04510.1016/j.msea.2008.08.045 ↗
35. Wang Y · Weld J · 2016 · 95 · 27
36. 10.1016/j.mspro.2015.04.15010.1016/j.mspro.2015.04.150 ↗
37. 10.1016/j.msea.2017.10.08610.1016/j.msea.2017.10.086 ↗
38. 10.1520/MONO3-EB10.1520/MONO3-EB ↗
39. 10.1002/srin.19960550310.1002/srin.199605503 ↗
40. Vuherer T · Metal · 2013 · 52 · 317
41. 10.1007/s40194-017-0498-x10.1007/s40194-017-0498-x ↗
42. 10.1016/j.ijpvp.2019.05.01010.1016/j.ijpvp.2019.05.010 ↗
43. 10.1016/j.matchar.2015.01.01310.1016/j.matchar.2015.01.013 ↗
44. 10.1533/9781845694012.2.47210.1533/9781845694012.2.472 ↗
45. Sulaiman S · Solid State Sci Technol · 2007 · 15 · 102
46. 10.1080/09603409.1998.1168958110.1080/09603409.1998.11689581 ↗
47. 10.1016/j.matchar.2016.05.02410.1016/j.matchar.2016.05.024 ↗
48. 10.1016/j.mspro.2015.04.15110.1016/j.mspro.2015.04.151 ↗
49. 10.1179/1743284713Y.000000023310.1179/1743284713Y.0000000233 ↗
50. 10.1016/j.msea.2013.10.07110.1016/j.msea.2013.10.071 ↗
51. 10.1007/978-0-387-88136-210.1007/978-0-387-88136-2 ↗