Cyclic crack growth properties of service-exposed ferritic steels for use in thermal fatigue assessments
Source abstract
Abstract
This paper is concerned with the laboratory isothermal (low cycle) fatigue crack growth properties (generally at 550°C) of eleven ferritic steel samples taken from power station components which have seen between 63,000 h and 175,000 h service exposure to high temperatures. Full chemical analyses and abbreviated service histories of the materials are presented. Both the short crack (LCF) and deep crack (LEFM) regimes are examined. In some cases it was possible to continue the growth of actual service cracks under laboratory conditions, by suitable machining of samples into specimens; in other cases it was necessary to start the crack artificially. It is intended that the results can be used in direct application to remanent life assessments. In many tests the creep-fatigue interaction was simulated by the addition of a 0.5 h tensile dwell, it being assumed that major damage was already present in the extracted samples. The short crack growth tests at 550°C with dwell have demonstrated that even where significant prior grain boundary damage is present, the resulting growth rates generally do not violate the upper bound relation at present used in the R5 assessment procedures. The deep crack growth rate tests at 550°C with dwell on the other hand have shown a sensitivity to microstructure such that heavily cavitated large-grained material can give growth rates in excess of the appropriate upper bound relation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Proc. Internat. Seminar:Cyclic Operation of Power Plant(eds I. A. Shibliet al.), London, 2001, EPRI Report No. 1004655, ISBN1-900814-45-5
2. Materials at High Temperatures, 2001,18, 193-270 (various papers).
3. R5: Assessment procedure for the high temperature response of struc-tures, Issue 3, British Energy Generation Ltd, Barnwood, UK, 2003.
4. 10.1179/mht.2002.02410.1179/mht.2002.024 ↗
5. 10.1115/1.292879410.1115/1.2928794 ↗
6. Shinya N. · Trans. Nat. Res. Inst. for Metals · 1987 · 29 · 115
7. Skelton R. P. · High Temp. Technol. · 1990 · 8 · 7510.1080/02619180.1990.11753462 ↗
8. Skelton R. P. · pp. 337
9. G. A. Webster and F. Djavanroodi, Determination of the crack growth behaviour and failure mode of pre-exposed material, COST 505, Group 2, Remanant Life, Project UK 26, Imperial College, London, January 1989.
10. Bicego V. · 1994 · pp. 191
11. Keienburg, K. H. and Hajdu, T. 1988, Materials examination on steam turbine components for lifetime predictions, COST 505-D13 Final Report.
12. Priest R. H. · pp. 31
13. Brett S. J. · pp. 3
14. Fenton S. T. · pp. 31
15. Skelton R. P. · 1993 · pp. 299
16. Holdsworth S. R. · 1993 · pp. 327
17. Skelton R. P. · High Temp. Technol. · 1989 · 7 · 11510.1080/02619180.1989.11753424 ↗
18. Skelton R. P. · 1999 · pp. 683
19. R. P. Skelton, Application of small specimen crack growth data to engineering components at high temperature: A review. In:Low Cycle Fatigue(eds H. D.Solomon et al.), ASTM STP 942, Amer. Soc. Testing Mater., Philadelphia, 1988, pp. 209-235.10.1520/STP24484S ↗
20. Skelton R. P. · 1993 · pp. 191
21. 10.1016/B0-08-043749-4/05112-010.1016/B0-08-043749-4/05112-0 ↗
22. 10.1016/0025-5416(75)90106-810.1016/0025-5416(75)90106-8 ↗
23. 10.1016/0025-5416(78)90135-010.1016/0025-5416(78)90135-0 ↗
24. Skelton R. P. · 1988 · pp. 108
25. Townsend R. D. · 1991 · pp. 1
26. Viswanathan R. · 2001 · pp. 545
27. Gooch D. J. · 1984 · pp. 889
28. 10.1016/0013-7944(75)90008-910.1016/0013-7944(75)90008-9 ↗
29. 10.1098/rsta.1980.010410.1098/rsta.1980.0104 ↗
30. 10.1016/B0-08-043749-4/05122-310.1016/B0-08-043749-4/05122-3 ↗
31. Neate G. J. · High Temperature Technol. · 1985 · 3 · 195
32. 10.1007/978-3-7091-2516-8_210.1007/978-3-7091-2516-8_2 ↗
33. Viswanathan R. · 198910.31399/asm.tb.dmlahtc.9781627083409 ↗
34. 10.1115/1.48279410.1115/1.482794 ↗
35. Charman D.
36. Cane B. J. · 1996 · pp. 473
37. Rees C. J. · 1995 · pp. 135
38. Tada H. · 1973
39. 10.1016/0142-1123(79)90043-410.1016/0142-1123(79)90043-4 ↗
40. 10.1016/0013-7944(78)90027-910.1016/0013-7944(78)90027-9 ↗
41. 10.1243/03093247V13208310.1243/03093247V132083 ↗
42. Gladwin D. N. · 1990 · pp. 765