journal article·2004-01

The use of advanced-creep data for new plant development and design, and for the exploitation of new materials

C. Berger, M. Schwienheer, A. Scholz

Materials at High Temperatures· Volume 21· Issue 1
Publisher page

Abstract

Advanced design methods contribute to the effective long term operation of high temperature components and guarantee low technical risk and high economical advantages. Along with the generation of advanced creep data, modelling and scatterband analyses are necessary to generate design curves and lower bound properties inclusive. Besides, in order to develop life prediction methods variable creep experiments lead to properties for single-stage and multi-stage loading. Further, the knowledge of multiaxial creep behaviour is of high future interest. The development of methods to transfer uniaxial material properties to multi-axial loading situations is a current challange. Different methods are established in order to describe creep crack initiation as well as crack propagation. A knowledge of the influence of creep processes on tolerance to pre-existing defects promotes the long term usability of components.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Probabilistic and Robust Engineering Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. British Standard PD5500:Specifications for unfired fusions welded pressure vessels; 1997.
2. Technische Regeln fur Dampfkessel TRD 301-Zylinderschalen unter innerem Überdruck, Ausgabe September 1983.
3. Technische Regeln fur Dampfkessel TRD 508-Zusätzliche Prüfungen an Bauteilen, berechnet mit zeitabhängigen Festigkeitskennwerten Ausgabe August 1983.
4. R5-AssessmentProcedure for High Temperature Response of Structures, Nuclear Electric, Berkeley Nuclear Laboratories, 2000.
5. RCC-MR,Design and Constructions for Mechanical Components of FBBR Nuclear Islands, Section I, Sub-section B, AFCEN, Paris, 1985.
6. ASME Boiler and Pressure Vessel Code,'Class 1 components in elevated temperature service', 1998
7. Staubli M. · p. 98
8. Berger, C.: Superwarmfeste ferritische Stähle für umweltschonende kohlebefeuerte Dampfkraftwerke mit Dampfeintrittstemperaturen von ca. 650°C, Teilprojekt E, Institut fur Werkstoffkunde, Technische Universität Darmstadt, DFG-Forschungsvorhaben, Fördernummer BE1890/10-5 (2002 bis 2004)
9. Mayer K. H., C. · und Gehtiusen der Dampfturbinen · 1997 · 10
10. Berger C. · p. 45.1
11. Final report of the VGB-Programm No · 2001
12. Final report of the sub-project of the European COST · 2000
13. 10.1016/S0029-5493(99)00036-910.1016/S0029-5493(99)00036-9 ↗
14. ECCC Recommendations — Volume 5 Part I [Issue 4],Guideline forthe Exchange and Collection of Creep Rupture, Creep Strain-Timeand Stress Relaxation Data for Assessment Purpose, Appendix Bl, ECCC-Document, Ed.: SR. Holdsworth, May 2001.
15. Brocks W. · Tagung des DVM-Arbeitskreises Bruchvorgänge · 1998 · S. 117/128
16. 10.1016/S0022-5096(98)90006-010.1016/S0022-5096(98)90006-0 ↗
17. Granacher, J., H. Moehlig, M. Schwienheer and C. Berger, Creep Equations for High Temperature Materials, Creep 7, Proc. of the Seventh Intern. Conf. on Creep and Fatigue at Elevated Temperatures, June 3-8, 2001, NRIM, Tsukuba, Japan, p. 609-616.
18. Schwienheer, M., H. Haase, A. Scholz and C. Berger: Long Term Creep and Creep Fatigue Properties of the martensitic Steels of Type (G)X12CrM0WVNbN10-1-1, Proc. of the 7th COST Conference “Materials for Advanced Power Engineering 2002”, Part III, Lecomte-Beckers, Carton, Schubert, Ennis (Ed), 2002, Liege, Belgium, pp. 1409/18.
19. Graham A. · J. Iron Steel Inst · 1955 · 179 · p. 205
20. Evans R. W. · 1982 · p. 135
21. Garofalo F10.1063/1.3048224 ↗
22. Kloos K. H. · Steel research · 1998 · 69 · p. 447
23. Kloos, K. H., J. Granacher and M. Monsees: Optimization and verifi-cation of creep equations for heat resistant steels,Steel research69 (1998) No. 10+11, pp. 454-462.
24. Granacher J., A. · 2001 · P. 209
25. Berger,C. ForschungsvorhabenKonstitutiveWerkstoff-beschreibungen für warmfeste Kraftwerksstähle im Kriech- und Kriechermfidungsbereich” AVIF-Nr. A166, IfW, TU-Darmstadt (2002 bis 2004).
26. Scholz, A., C. Berger, A. Samir und R. Bardenheier: Biaxiale TMF-Simulation mit Kreuzproben zur Untersuchung des Kriecher-mfidungsrissverhaltens von Hochtemperaturwerkstoffen, DVM-Tagung Werkstoffprüfung 2002, Bad Nauheim, S. S. 280/8510.1002/9783527610310.ch37 ↗
27. Spindler, MM. ‘The multi-axial and uniaxial creep ductility of Type 304 steel as a function of stress and strain rate’,Proc. ECCC Information Day, Prague (2003).10.3184/096034004782750023 ↗
28. Ewald J · Mat.-wiss. Werkstofftechn. · 1998 · 20 · p. 195/206
29. Maile, K., G. Schellenberg, J. Granacher and M. Tramer: Description of Creep and Creep Fatigue Crack Growth in 1% and 9% Cr-Steels,Vortrag auf der Intern. HIDA Conf.,1998, Paris, Tagungsband, Reference No. S5-38-1/910.1080/09603409.1998.11689591 ↗
30. Klenk, A., F. Mueller, D. Dean: Developments in the use of creep crack initiation for design and performance assessment,ECCC Information Day2003, Prague.
31. Holdsworth, S. R.: Optimisation of Methodologies to predict crack initiation and early growth in components under complex creep-fatigue loading,Brite Euram C-FAT, Project No: BE 5245, Final Technical Report (1997).