A comparison of three weld consumables for P92 under creep
Source abstract
Abstract
To encourage realistic power plant weld heat-affected zone failures within reasonable test times in laboratory creep testing, a welding consumable for P92 steel with the best creep performance was sought, to avoid failures in the weld metal itself. Therefore, a short term creep test programme was undertaken to evaluate weld pads manufactured using three commercially available consumables for P92, the results of which are presented in this paper. The effects of weld consumable composition are discussed both in general and with specific reference to the behaviour observed. The best overall and the poorest performing weld consumables were identified by composition. Microstructural investigations revealed the presence of precipitate free zones, that more readily formed using the poorest performing consumable as the result of retained δ–ferrite, since its deposited chemical composition led to the lowest value of δ–ferrite formation temperature. A consumable not based on P92 but on the stronger steel alloy FB2 did not perform as well as expected, confirming previous suggestions that the compositional factors which make a parent material creep-strong do not apply on a one-to-one basis to weld metals.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. 10.1179/174328406X14877810.1179/174328406X148778 ↗
2. 10.1016/j.ijpvp.2006.09.00610.1016/j.ijpvp.2006.09.006 ↗
3. 10.1016/j.ijpvp.2006.09.01010.1016/j.ijpvp.2006.09.010 ↗
4. 10.1179/136217109X44119110.1179/136217109X441191 ↗
5. 10.1016/j.ijpvp.2007.06.01010.1016/j.ijpvp.2007.06.010 ↗
6. 10.1016/j.ijpvp.2007.06.01110.1016/j.ijpvp.2007.06.011 ↗
7. Brózda J · Int · 2005 · 19 · 5
8. Richardot, D., Vaillant, J. C., Arbab, A. and Bendick, W (2000) The T92/P92 Book: Vallourec & Mannesmann Tubes.
9. Zhang Z. · 2009
10. 10.1016/j.ijpvp.2006.03.00510.1016/j.ijpvp.2006.03.005 ↗
11. Marshall, A. W., Zhang, Z. and Holloway, G. B. (2002) 5th International Conference on Welding and Repair Technology for Power Plants, Alabama, USA, Paper No. 69.
12. Hasegawa, Y, Muraki, T., Ohgami, M. and Mimura, H. (2000) Key Engineering Materials: Creep Fract. Eng. Mater Struct. 171-4, 427–435.
13. 10.1016/j.msea.2003.11.07310.1016/j.msea.2003.11.073 ↗
14. Czyrska-Filemonowicz, A., Bryla, K., Spiradek-Hahn, K., Firganek, H., Zielinska-Lipiec, A. and Ennis, P. (2003) Sixth International Charles Parsons Turbine Conference, pp. 365-377. Dublin, Ireland.
15. Golpayegani A. · 2003
16. 10.1179/02670830110150897210.1179/026708301101508972 ↗
17. 10.1016/j.ijpvp.2006.09.00310.1016/j.ijpvp.2006.09.003 ↗
18. 10.1179/02670830322501068710.1179/026708303225010687 ↗
19. Yin ES. · Mater. Sci · 2009 · 40 · 302
20. Kern, T.U., Staubli, M. and Scarlin, B. (2002) ISIJ Int. 42, 1515–1519.10.2355/isijinternational.42.1515 ↗
21. Saber M. · Des · 2011 · 46 · 842 — 851
22. 10.1179/02670830322500943610.1179/026708303225009436 ↗
23. 10.1016/S1044-5803(01)00159-010.1016/S1044-5803(01)00159-0 ↗
24. 10.1016/j.jmatprotec.2006.05.01410.1016/j.jmatprotec.2006.05.014 ↗
25. Cai G. J. · Metall. and Mater Sc · 1997 · 1417
26. Bhadeshia, H. and Honeycombe, R. (2006) Steels: micro-structure and properties, 3rd edn. Oxford: Elsevier.10.1016/B978-075068084-4/50016-9 ↗
27. Hosoi Y · Japan · 1986 · 26 · B30—B30
28. 10.1179/174328005X4114010.1179/174328005X41140 ↗
29. Gianfrancesco, A. D., Cipolla, L., Venditti, D., Neri, S. and Calderini, M. (2009) 2nd ECCC Creep Conference, pp. 919-934, DEStech Publications, Inc., Zurich.