Intergranular cracking of Hastelloy C-276 in the socket welded assemblies
Source abstract
Abstract
The cause of thermal cracking about a socket welded tube was investigated by stress simulation and its comparison to hardness distribution of welding seam, HAZ and matrix of the tube. In the condition of heat-input in melting range of 1349°C, the stress was concentrated in HAZ at the opposite side of welding area by ANSYS program, which corresponded to the distribution of real hardness values of the tube. The high stress concentration in HAZ might be induced from fine carbide precipitation which formed during welding process. It could cause, therefore, tube cracking in operating condition simultaneously followed by bulging inside of the welded tube. In the crack propagation through all the tube originated from inside HAZ, it might be accelerated by thermal fatigue, and propagated along grain boundaries accompanied by the metal dust formation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Fontana, M. G.Corrosion Engineering, p. 109. McGraw-Hill (1987).
2. Choe, B. H.Failure Analysis of Metals, p. 98. Jinyoungsa (1997).
3. Dhooge A · 1997
4. Naumann, F. K.Case Histories in failure analysis, p. 39. ASM (1979).
5. Naumann, F. K.Failure Analysis, p. 257. Dr. Rie-derer-Verlag GmbH (1983).
6. Lee, D. N.Mechanical Behavior of Materials, p. 403. Munundang (1999).
7. Kim, J. H. GMAW Simulation by Analysis of Ther-mal elastic stress, master's thesis of Seoul National University, p. 21 (2000).
8. The Korean Welding Society: Welding/Joining · Handbook · 1998 · 220 · p. 14
9. Zahs A. · Sc · 2000 · 42, 1095