Hot corrosion resistance of gas turbine materials in combusted syngas environments
Source abstract
Abstract
To reduce CO2 emissions, there is interest in a new generation of industrial gas turbines operating in advanced integrated gasification combined cycles (IGCC) with the option for pre-combustion CO2 removal systems. These gas turbines may be fired on syngas, cleaned H2 rich syngas, or natural gas, and this will alter the hot corrosion experienced by components in the hot gas path. Deposit recoat laboratory tests have looked at the response of 11 state-of-the-art materials systems under the expected IGCC conditions. MTData has been used to calculate the optimal deposits under the temperature and gas conditions for these tests. Studies of metal loss have helped assess quantitatively the resistance of the different materials systems, while microscopy techniques have given information on the degradation mechanisms experienced. Rene 80 has been selected to demonstrate the data from these tests and shows the most significant metal loss under partially cleaned syngas conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. ‘Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions: A Roadmap for Moving to a Competitive Low Carbon Economy in 2050’, European Commission, Reference: COM/2011/0112 final, 2011.
2. Dechamps P: ‘The EU research strategy towards zero emission fossil fuel power plant’, in ‘Materials for power engineering 2006’, (ed. J Lecomte-Beckerset al.), 25–36; 2006, Forschungszentrum Jülich.10.3997/2214-4609.201402021 ↗
3. Maurstad O: ‘An overview of coal based integrated gasification combined cycle (IGCC) technology’, Technical publication, MIT LFEE 2005-002 WP, 2005.
4. 10.1016/j.ijhydene.2009.05.05410.1016/j.ijhydene.2009.05.054 ↗
5. 10.1179/1743284712Y.000000013310.1179/1743284712Y.0000000133 ↗
6. 10.1080/0360245800806753510.1080/03602458008067535 ↗
7. 10.1016/S0039-6028(87)80337-010.1016/S0039-6028(87)80337-0 ↗
8. Duret-Thual C, Morbioli R and Steinmetz P: in ‘A guide to the control of high temperature corrosion and protection of gas turbine materials’, (ed. O. Morocutti); 1986, Belgium, Commission of the European Communities.
9. 10.4028/www.scientific.net/MSF.369-372.83310.4028/www.scientific.net/MSF.369-372.833 ↗
10. Simms NJ, Smith PJ, Encinas-Oropesa A, Ryder S, Nicholls JR and Oakey JE: ‘Lifetime modelling of high temperature corrosion processes’, (ed. M Schützeet al.), 246, EFC No. 34; 2001, London, Maney Publishing.
11. 10.1016/S0016-2361(03)00219-910.1016/S0016-2361(03)00219-9 ↗
12. 10.1007/BF0065683510.1007/BF00656835 ↗
13. 10.1016/S0364-5916(02)00036-610.1016/S0364-5916(02)00036-6 ↗
14. 10.1002/maco.20130742510.1002/maco.201307425 ↗