High temperature oxidation of the bicrystals of Incoloy alloy 909 and an Fe-36% Ni alloy in air under tensile stress
Source abstract
Abstract
The bicrystals of both an Fe-36% Ni alloy and Incoloy alloy 909 were oxidized at 1200 and 1250 K in air respectively with a tensile stress of 2.5, 4.9, or 14.7 MPa. The thickness of external scale, intergranular subscale and intragranular subscale all exhibited linear relationships with the square root of oxidation time, indicating that oxidation followed parabolic law. In oxidized Fe-36% Ni bicrystals, leading cellular oxide nodules formed in intragranular subscale and a tensile stress promoted intergranular oxidation and the formation of cavities at the grain boundary. In oxidized Incoloy alloy 909 bicrystals, intergranular subscale only slightly led the internal subscale. However, intergranular oxidation was obvious in equiaxed specimens of this alloy. The external scale was stratified in Fe-36% Ni alloy, but it exhibited cellular or pocket-like structure in Incoloy alloy 909. The latter alloy possessed a much better resistance to oxidation than the Fe-36% Ni alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Smith, D. F. and Smith, J. S. A Silicon-Containing, Low-Expansion Alloy with Improved Properties, Superalloys 1984, Proceedings of the 5th International Symposium on Superalloys, Gell, M., Kortovich, C. S., Bricknell, R. H., Kent, W. B. and Radavich, J. F., eds. AIME, New York, NY, 591-600 (1984).10.7449/1984/Superalloys_1984_591_600 ↗
2. Smith, D. F. and Holderby, M. A. Process Sensitivities in Incoloy Alloy 909, Heat-Resistant Materials, Proceedings of the 1st International Conference on Heat-Resistant Materials, Wisconsin, USA, 285-292 (1991)
3. Heck K. A · 1990 · 273
4. Heck, K. A., Smith, D. F., Smith, J. S., Wells, D. A. and Holderby, M. A. The Physical Metallurgy of a Silicon-Containing Low Expansion Superalloy, Superalloys 1988, Proceedings of the 6th International Symposium on Superalloys, Reichman, S., Duhl, D. N., Maurer, G., Antolovich, S. and Lund, C., eds. The Metallurgical Society, 151-160 (1988).10.7449/1988/Superalloys_1988_151_160 ↗
5. Smith, D. F. and Smith, J. S. A History of Controlled, Low Thermal Expansion Superalloys, Physical Metallurgy of Controlled Expansion Invar-Type Alloys, Russell, K. C. and Smith, D. F., eds. The Minerals, Metals & Materials Society, 253-272 (1990).
6. Hayes, R. W., Smith, D. F., Wanner, E. A. and Earthman, J. C. Effects of Environment on the Rupture Behavior of Alloys 909 and 718, Mater. Sci. Eng. A, A177 (1-2), 43-53 (1994)10.1016/0921-5093(94)90476-6 ↗
7. Woodford, D. A. Environmental Damage of a Cast Nickel Base Superalloy, Metall. Trans. A, 12A (2), 299-308 (1981)10.1007/BF02655203 ↗
8. Bricknell, R. H. and Woodford, D. A. Grain Boundary Embrittlement of the Iron-Base Superalloy IN 903A, Metall. Trans. A, 12A (9), 1673-1680 (1981)10.1007/BF02643573 ↗
9. 10.2355/isijinternational.38.101510.2355/isijinternational.38.1015 ↗
10. 10.1016/S0010-938X(69)80100-910.1016/S0010-938X(69)80100-9 ↗