journal article·2013-06

Low cycle fatigue specimen design, hardening, softening and strain concentration effects at elevated temperatures

R. P. Skelton

Materials at High Temperatures· Volume 30· Issue 2
Publisher page

Abstract

This paper considers the likely strain concentration effects generated in the shoulder/gauge intersection region of typical specimens employed in low cycle fatigue tests at high temperatures. The starting point is taken as the well known elastic stress concentration factor curves of Peterson which are extrapolated using data in the literature and other supporting (finite-element) calculations. Elastic–plastic values of strain concentration factors are then derived using the relations due to (a) Neuber, (b) Stowell–Hardrath–Ohman and (c) an energy method. It is shown in each case that these factors decrease with evolutionary cyclic hardening and increase with cyclic softening in a systematic way, as the material behaves according to the Ramberg–Osgood deformation law. A sensitivity study is carried out for each method, both for a ‘model material’ and real alloys and the implications of the shoulder radius/gauge diameter ratio is considered against the recommendations of various Testing Standards and Round-Robin undertakings.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Fire effects on concrete materials · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. Skelton, R. P. (2011) Mater High Temp. 28, 58–73.10.3184/096034011X12990899237313 ↗
2. Hähner, P. (ed.) Validated Code of Practice for strain-controlled thermo-mechanical fatigue testing, TMF Standard Work Package 6 Report, Contract G6RD-CT-2001-00526, Project No. GRD2-2000-30014, September 2005.
3. BSI Standards publication (2011). BS ISO 12111:2011 Metallic materials — Fatigue testing —Strain-controlled thermomechanical fatigue testing method.
4. Day, M. F. and Harrison, G. F. (1982) In: Loveday, M. S. et al. (eds), Measurement of high temperature mechanical properties of materials, pp. 225-240. HMSO, London.
5. 10.1520/JTE11018J10.1520/JTE11018J ↗
6. Jaske C. E. · B · 1972 · 94 · 930
7. British Standards publication (2006). BS 7270:2006. Metallic materials. Constant amplitude strain controlled axial fatigue. Method of test.
8. ASTM E 606 (2004) Standard practice for strain-controlled fatigue testing. ASTM Standards, Vol. 03.01, American Society of Testing Materials, West Conshohocken.
9. ASTM E 2714 (2009) Standard test method for creep-fatigue testing, ASTM Standards, Vol. 03.01, American Society of Testing Materials, West Conshohocken.
10. 10.1016/j.ijfatigue.2009.05.00810.1016/j.ijfatigue.2009.05.008 ↗
11. 10.1111/j.1460-2695.1989.tb00519.x10.1111/j.1460-2695.1989.tb00519.x ↗
12. ASTM E 2368-10 (2010) Standard practice for strain controlled thermomechanical fatigue testing. American Society of Testing Materials,West Conshohocken.
13. Castelli, M. G. and Ellis, J. R. (1993) In: Sehitoglu, H. (ed.), Thermomechanical fatigue behaviour of materials, pp. 195-211. ASTM STP 1188. American Society of Testing Materials, West Conshohocken.10.1520/STP24257S ↗
14. Nazmy M.Y · Trans · 1983 · 14 · 449
15. Wareing, J., Tomkins, B, and Sumner, G. (1972) In: Carden, A. E., McEvily, A. J. and Wells, C.H. (eds), Fatigue at elevated temperatures, ASTM STP 520, pp. 123-137. American Society for Testing and Materials, West Conshohocken.10.1520/STP38834S ↗
16. Tsuzaki K. · Eng · 1983 · 61 · 247
17. 10.1115/1.292879410.1115/1.2928794 ↗
18. Choudhary B. K. · Eng · 1991 · 148 · 267
19. 10.1007/BF0264840410.1007/BF02648404 ↗
20. 10.1007/BF0265439310.1007/BF02654393 ↗
21. Ruggles, M. B. and Ogata, T. (1994) Creep-fatigue criteria and inelastic behaviour of modified 9Cr 1Mo steel at elevated temperatures, Oak Ridge National Laboratory Report ORNL/M-3198, February. [EPRI Research Project 30310 (DOE-ERD-86-5860).]10.2172/10131895 ↗
22. 10.1016/j.ijpvp.2004.09.00410.1016/j.ijpvp.2004.09.004 ↗
23. Kschinka B. · Eng · 1989 · 110 · 89
24. Thomas, G. B. (1985) In: Sumner, G. and Livesey, V.B. (eds), Techniques for high temperature fatigue testing, pp. 45-70. Elsevier Applied Science, New York.
25. Spindler M. W · Experimental mechanics, advances in design testing and analysis · 1998 · pp. 1127
26. 10.1299/jsme1958.12.18810.1299/jsme1958.12.188 ↗
27. Okazaki M. · Trans · 21 · 8
28. 10.1115/1.322562910.1115/1.3225629 ↗
29. 10.3184/096034012X1348154270013610.3184/096034012X13481542700136 ↗
30. Sumner, G (1982) In: Loveday, M.S. et al. (eds), Measurement of high temperature mechanical properties of materials, pp. 158-170. HMSO, London.
31. Sumner, G. (1988) In: Curbishley, I. (ed.), Characterisation of high-temperature materials: mechanical testing, pp. 173-225. Institute of Metals, London.
32. 10.3184/096034010X1271781991526810.3184/096034010X12717819915268 ↗
33. Thomas, G. B. and Varma, R. K. (1990) Evaluation of low cycle fatigue test data in the BCR/VAMAS intercomparison programme. NPL Report DMM (D)50
34. Thomas, G. B. and Varma, R. K. (1992) In: Loveday, M.S. and Gibbons, T.B. (eds), Harmonisation of testing practice for high temperature materials, p. 155-185. Elsevier Applied Science, London.10.1007/978-94-011-2888-9_8 ↗
35. Kitagawa, M., Yamaguchi, K., Fukuda, Y., Komine, R. and Hirata, H. (1993), ISIJ Int. 33, 817–824.10.2355/isijinternational.33.817 ↗
36. Skelton R. P. · Mater High Temp · 1997 · 14 · 5310.1080/09603409.1997.11689527 ↗
37. Kalyanasundaram V. · 2011
38. 10.1007/978-94-011-2888-9_910.1007/978-94-011-2888-9_9 ↗
39. Verrilli, M. J., Castelli, M. G., Bressers, J. and Oehmke, R. L. T. (1995) In: 81” Meeting of the AGARD SMP Panel on Thermal Mechanical Fatigue of Aircraft Engine Materials, Banff, Canada, pp. 4.1-4.11.
40. 10.1520/STP15264S10.1520/STP15264S ↗
41. 10.1016/j.ijfatigue.2007.01.05210.1016/j.ijfatigue.2007.01.052 ↗
42. 10.1016/j.ijfatigue.2007.01.05910.1016/j.ijfatigue.2007.01.059 ↗
43. Petersen, R. E. (1997) In: Pilkey, W.D. (ed.), Petersons stress concentration factors, 2nd edn. John Wiley and Sons, New York.
44. 10.1115/1.364178010.1115/1.3641780 ↗
45. Stowell E. Z · National Advisory Committee for Aeronautics Technical Note · 1950 · 2073
46. Hardrath, H. F. and Ohman, L. (1953) A study of the elastic and plastic concentration factors due to notches and fillets in flat plates. National Advisory Committee for Aeronautics, Report 1117.
47. Molski K. · Sci. Eng · 1981 · 50 · 93
48. Polak J · Eng · 1983 · 61 · 195
49. Ramberg, W. and Osgood, W. R. (1943) Description of stress—strain curves by three parameters, Tech. Note No. 902, NACA.
50. ABAQUS Version 6.2, 2001, Standard User's Manual, Hibbitt, Karlson and Sorensen Inc.
51. Kato A · J. Strain Anal · 1991 · 26 · 21
52. 10.1243/030932499151368710.1243/0309324991513687 ↗
53. 10.1243/03093240376267191710.1243/030932403762671917 ↗
54. Ohnami, M., Asada, Y., Sakane, M., Kitagawa, M. and Sakon, T. (1988) In: Solomon, H.D. et al. (eds), Low cycle fatigue, ASTM STP 942, pp. 1066-1095 American Society of Testing Materials, West Conshohocken.
55. 10.1243/030932404189646110.1243/0309324041896461 ↗
56. 10.1243/030932405X1601610.1243/030932405X16016 ↗
57. Skelton, R. P. (1987) In: Skelton R.P. (ed.), High temperature fatigue: properties and prediction, pp. 27-112. Elsevier Applied Science, London10.1007/978-94-009-3453-5_2 ↗
58. Dawson, R. A. T. (1967) In: Thermal and High strain fatigue, monograph and report Series No. 32, pp. 40-54. Metals and Metallurgy Trust, London,
59. 10.1179/mst.1994.10.7.62710.1179/mst.1994.10.7.627 ↗
60. 10.1179/mht.2002.02210.1179/mht.2002.022 ↗
61. Skelton, R. P. (2002) Mater High Temp. 19, 193–213.10.1179/mht.2002.024 ↗
62. Skelton, R. P., Wee, S. T. and Webster, G. A. (2001). Mater High Temp. 18, 139–152.10.1179/mht.2001.016 ↗
63. Skelton, R. P. (2002) In: Biallas, G. et al. (eds) Proc. CAMP 2000, High Temperature Fatigue (ISBN 3-00-009254-4), Paderborn, Bonifiatus GmbH Druck Buch verlag, pp. 42-55.
64. 10.1243/03093247JSA16910.1243/03093247JSA169 ↗
65. Kimmins, S. T. and Horton, C. A. P. (1982) In: 4th Int. Conf. Welding in Nuclear Engineering, pp. 280-284. German Welding Society, Dusselforf (DVS 75).
66. Singhal, S. N. and Tait, R. A. (1988) In: H. D. Solomon et al. (ed.), Low Cycle Fatigue, ASTM STP 942, pp. 1096-1111 American Society of Testing Materials, Philadelphia.
67. 10.1177/10567895990080020210.1177/105678959900800202 ↗
68. 10.1016/S0020-7403(00)00094-110.1016/S0020-7403(00)00094-1 ↗
69. Abdel-Raouf H. · Trans · 1974 · 5 · 267
70. Skelton R. P · Technol · 1991 · 7 · 427
71. Ohnami M · 1988
72. Kandil, F.A. (1998) Measurement of bending in uniaxial low cycle fatigue testing. NPL Measurement Good Practice Guide No. 1 NPLMMS001 (lBSN 0946754 160).
73. 10.3184/096034010X1271781991522210.3184/096034010X12717819915222 ↗
74. 10.1111/j.1460-2695.1993.tb00763.x10.1111/j.1460-2695.1993.tb00763.x ↗
75. 10.1111/j.1460-2695.1993.tb00764.x10.1111/j.1460-2695.1993.tb00764.x ↗
76. Dyson B. F · Lond. A · 1995 · 351 · 579