Thermo-mechanical behaviours of light alloys in comparison to high temperature isothermal behaviours
Source abstract
Abstract
In this article, out-of-phase thermo-mechanical fatigue (TMF) behaviours of light alloys were investigated in comparison to their high temperature low cycle fatigue (LCF) behaviours. For this objective, strain based fatigue tests were performed on the A356 aluminium alloy and on the AZ91 magnesium alloy. Besides, TMF tests were carried out, where both strain and temperature changed. The fatigue lifetime comparison demonstrated that the TMF lifetime was less than that one under LCF loadings at elevated temperatures for both light alloys. The reason was due to severe conditions in TMF tests in comparison to LCF tests. The temperature varied in TMF test but it was constant under LCF loadings. As the other reason, the tensile mean stress occurred under TMF loadings, in comparison to the compressive mean stress under LCF loadings. At high temperatures, the cyclic hardening behaviour occurred in the AZ91 alloy and the A356 alloy had the cyclic softening behaviour.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Farrahi G. H., Azadi M., Winter G. and Eichlseder W. ‘Thermo-mechanical and low cycle fatigue behavior of aluminum alloy cylinder heads’, Proc. Int. Conf. Exp. Solid Mech. Dyn., Tehran, Iran, May 2012, Tehran University.
2. 10.1016/j.matdes.2013.07.07510.1016/j.matdes.2013.07.075 ↗
3. 10.1111/ffe.1207810.1111/ffe.12078 ↗
4. Azadi M. · Int. J. Eng., Trans. C: Aspects · 2013 · 26 · 1461
5. 10.1016/S0013-7944(02)00021-810.1016/S0013-7944(02)00021-8 ↗
6. 10.1016/S0013-7944(03)00036-510.1016/S0013-7944(03)00036-5 ↗
7. 10.1007/BF0269315910.1007/BF02693159 ↗
8. 10.1016/j.matdes.2008.11.02510.1016/j.matdes.2008.11.025 ↗
9. 10.1016/j.proeng.2010.03.08210.1016/j.proeng.2010.03.082 ↗
10. 10.1016/j.proeng.2010.03.13610.1016/j.proeng.2010.03.136 ↗
11. Shirazabad M. M. · J. Engine Res. · 2011 · 24 · 29
12. 10.1016/j.proeng.2013.03.32910.1016/j.proeng.2013.03.329 ↗
13. 10.1016/j.msea.2009.04.03710.1016/j.msea.2009.04.037 ↗
14. 10.1016/j.matchar.2011.01.01510.1016/j.matchar.2011.01.015 ↗
15. 10.1115/1.164587510.1115/1.1645875 ↗
16. 10.1016/S0921-5093(01)01105-410.1016/S0921-5093(01)01105-4 ↗
17. 10.1016/j.msea.2010.09.01610.1016/j.msea.2010.09.016 ↗
18. 10.1016/j.ijfatigue.2012.10.01010.1016/j.ijfatigue.2012.10.010 ↗
19. 10.1016/S0921-5093(00)02022-010.1016/S0921-5093(00)02022-0 ↗
20. Luft J., Beck T. and Loehe D. ‘Lifetime and damage behavior of a cast aluminum alloy under TMF and superimposed TMF/HCF loading’, Proc. 11th Int. Conf. Fract., Politecnico di Torino, Turin, Italy, March 2005.
21. 10.1016/j.msea.2006.05.17710.1016/j.msea.2006.05.177 ↗
22. Thomas J. J., Verger L., Bignonnet A. and Borret S. M. ‘Thermo-mechanical design in the automotive industry’, SAE Int. Tech. Pap. Ser., Paper No. 2002-01-0659, USA, 2002.
23. 10.1111/j.1460-2695.2004.00746.x10.1111/j.1460-2695.2004.00746.x ↗
24. 10.1016/j.ijfatigue.2007.01.00610.1016/j.ijfatigue.2007.01.006 ↗
25. Riedler M., Czettl C., Minichmayr R., Winter G. and Eichlseder W. ‘Thermo-mechanical fatigue lifetime assessment with damage-parameters, energy-criteria and cyclic-J-integral concepts’, Proc. 16th Eur. Conf. Fract., European Structural Integrity Society (ESIS), Alexandroupolis, Greece, July 2006.
26. 10.1007/s11012-006-9020-z10.1007/s11012-006-9020-z ↗
27. 10.1016/j.proeng.2010.03.08310.1016/j.proeng.2010.03.083 ↗
28. 10.1016/j.proeng.2010.03.12410.1016/j.proeng.2010.03.124 ↗
29. 10.1016/j.proeng.2010.03.19010.1016/j.proeng.2010.03.190 ↗
30. Liu A. F. ‘Mechanics and mechanisms of fracture: an introduction’, ASM Int., USA, 2005.10.31399/asm.tb.mmfi.9781627083096 ↗
31. Manson S. S. and Halford G. R. ‘Fatigue and durability of structural materials’, ASM Int., USA, 2006.10.31399/asm.tb.fdsm.9781627083447 ↗