The addition of Si to Fe-based alloys as a means of enhancing sulphidation resistance in complex mixed atmospheres
Source abstract
Abstract
Of the three principal oxide-forming elements present in most high temperature engineering alloys (Cr, Al and Si), silicon has been the poor relation, largely as a result of its potentially adverse effect upon fabricability and weldability. However, several advanced heat resistant alloys containing between 2 and 3.5% Si have come onto the market in recent years with reported good resistance to corrosive atmospheres [1–8]. However, these alloys contain high levels of Cr, Ni and/or Co and are therefore relatively expensive.The present study explores the “Si-effect” using a cheaper 12%Cr ferritic, Type 410 class of steel. A commercial alloy, HCM 12, containing 0.2% Si has been selected as a base composition to which Si has been added in amounts ranging from nominally 1 to 4%. Samples of this commercial alloy have been exposed alongside similar specimens machined from specially cast higher-Si model alloys in highly reducing, non-equilibrated CO-based gas mixtures containing 4% CO2, 0–3% H2O and 0.1 and 0.8% H2S, balance H2. These atmospheres simulate those found in a dry-feed entrained slagging coal gasifier where corrosive degradation in the form of sulphidation attack limits operating temperature and therefore plant efficiency. Constructional costs remain an important issue, however, and comparisons are made with the performance of higher alloyed materials, HR 3C and Alloy 800H, exposed at the same time.Initially, experiments were carried out for up to 2,000 hours at 450°C in a 0.8%H2S containing atmosphere. Based upon the findings of these tests, a second series was carried out at a higher temperature, i.e. 550°C, for 1,000 hours in a 0.1%H2S gas mixture. Specimens were subjected to periodic interruptions for weight change measurements and visual inspection with selected samples also being discontinued for more in-depth surface and cross-sectional microstructural studies as well as metal loss measurements. The influence of Si upon corrosion kinetics and in modifying the nature and extent of attack has been established.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · High-Temperature Coating Behaviors · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Heat Resistant Alloys. Tech. Bull. 150, pp. 1-18. Rolled Alloys Inc. (1990).
2. High-performance alloys. The key to innovative solutions, Publication No. N565, Krupp VDM GmbH, 1-30 (1999).
3. Norton, J.F., Hodge, G.F. and Lai, G.Y. A study of the corrosion behaviour of some Fe-Cr-Ni and advanced Ni-based alloys exposed to a sulphidising/oxidising/ carburising atmosphere at 700°C, Proc. Int. Conf. High Temperature Materials for Power Engineering, Part I, 167-176, Kluwer Academic Publishers, (1990)
4. Lai G.Y · 1991 · 1
5. Ernst, S.C. and Lai, G.Y. A new high strength Fe-Ni-Cr-Nb-N alloy for elevated temperature applications, Proc. 1st Int.Conf. Heat Resistant Materials, ASM-International (1991)
6. Lai, G.Y, Hodge, G.F. and Norton, J.F. The corrosion behaviour of a new sulfidation-resistant alloy in a sulfidizing/oxidizing/carburizing atmosphere, Proc.lst Int. Conf. Heat Resistant Materials, pp. 211-217. ASM-International, (1991)
7. Norton J.F · 1994 · pp. 1617
8. Norton, J.F., Levi, T.P. and Bakker, W.T. The corrosion behaviour of several Fe and Ni-base alloys exposed to a reducing-sulphidising atmosphere at 600°C, Proc.2nd Int. Conf. Heat Resistant Materials II, pp. 111-120. ASM-International, (1995)
9. Norton J.F. · 1997 · pp. 607
10. Norton, J.F., Maier, M., and Bakker, W.T. Corrosion of heat exchanger alloys exposed to a non-equilibrated CO-based sulfidising environment at 550°C, Corrosion/99, NACE, Paper 69, 1-18 (1999)