Finite Element Analysis and Computational Fluid Dynamics Verification of Molten Pool Characteristics During Selective Laser Melting of Ti-6Al-4V Plates
Source abstract
Abstract
The finite element (FE) method is used to characterize the thermal gradient, solidification rate, and molten pool sizes of Ti-6Al-4V plates in the process of selective laser melting (SLM). The results are verified by using the computational fluid dynamics (CFD) simulation. The proposed FE model contains a series of toolpath information that is directly converted from a G-code file, including hatch spacing, laser power, layer thickness, dwell time, and scanning speed generated by using Slic3r software from a CAD file. A proposed multi-layer, multi-track FE model is used to investigate the influence of the laser power, scanning speed, and scanning path on the microstructure in the Ti-6Al-4V plate built via SLM. The processing window is also determined based on the proposed FE model. The FE results indicate that, with a decrease in the laser power and an increase in the scanning speed, the morphology of the crystal grains, showing fully columnar crystals, gradually deviates from the fully equiaxed region. The formed grains are dependent on the laser power, scanning speed, and deposition position, but they are not sensitive to the scanning path, and with the deposition from the bottom layer to the top layer, the size of the formed grains is gradually increasing, which shows a good agreement with the experimental results.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Aeronautical Manufacturing Engineering, Nanchang Hangkong University, Nanchang, China.
Department of Engineering, Shenzhen MSU-BIT University, Shenzhen, China.
School of Material Science and Engineering, Nanchang Hangkong University, Nanchang, China.
References (44)
Show source-provided references
1. 10.31399/asm.tb.ttg2.t6112000510.31399/asm.tb.ttg2.t61120005 ↗
2. Welsch G, , Boyer R, , Collings EW, et al. Materials Properties Handbook: Titanium Alloys. ASM International, 1993; pp. 3–31.
3. 10.1007/s11665-010-9670-910.1007/s11665-010-9670-9 ↗
4. 10.3390/met701000210.3390/met7010002 ↗
5. 10.3184/003685012X1342098446304710.3184/003685012X13420984463047 ↗
6. 10.1007/s00170-012-4558-510.1007/s00170-012-4558-5 ↗
7. 10.1002/adma.20190385510.1002/adma.201903855 ↗
8. 10.1016/j.ijmachtools.2018.01.00310.1016/j.ijmachtools.2018.01.003 ↗
9. 10.1016/j.ijleo.2019.16384210.1016/j.ijleo.2019.163842 ↗
10. Turner RP Panwisawas C Sovani Y et al. Linking a CFD and FE analysis for welding simulations in Ti-6Al-4V. 10th International Conference on Trends in Welding Research and 9th International Welding Symposium of Japan Welding Society (9WS). Tokyo Japan 2016; pp. 11–14.
11. 10.1016/j.apm.2020.11.02710.1016/j.apm.2020.11.027 ↗
12. 10.1016/j.phpro.2016.08.15010.1016/j.phpro.2016.08.150 ↗
13. 10.1007/s00466-018-1614-510.1007/s00466-018-1614-5 ↗
14. 10.1016/j.ijmecsci.2017.12.00110.1016/j.ijmecsci.2017.12.001 ↗
15. 10.1142/S242491301750013810.1142/S2424913017500138 ↗
16. 10.1016/j.jmapro.2019.04.01910.1016/j.jmapro.2019.04.019 ↗
17. Li YL, , Gu DD. Thermal behavior during selective laser melting of commercially pure titanium powder: Numerical simulation and experimental study. Addit Manuf, 2014; 1:99–109.
18. 10.1115/1.402324010.1115/1.4023240 ↗
19. 10.1016/j.phpro.2013.03.16210.1016/j.phpro.2013.03.162 ↗
20. 10.1016/j.jmatprotec.2014.06.00110.1016/j.jmatprotec.2014.06.001 ↗
21. 10.1016/j.rinp.2020.10300510.1016/j.rinp.2020.103005 ↗
22. 10.1109/LRA.2016.259860110.1109/LRA.2016.2598601 ↗
23. 10.1016/j.ijheatmasstransfer.2017.01.09310.1016/j.ijheatmasstransfer.2017.01.093 ↗
24. 10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
25. 10.1016/j.commatsci.2009.05.00710.1016/j.commatsci.2009.05.007 ↗
26. 10.1016/j.addma.2016.06.01110.1016/j.addma.2016.06.011 ↗
27. 10.1088/1361-6463/abcc9010.1088/1361-6463/abcc90 ↗
28. Denlinger ER, , Irwin J, , Michaleris P. Thermomechanical modeling of additive manufacturing large parts. J Eng Ind, 2014; 136:061007.
29. Cheng B, , Shrestha S, , Chou K. Stress and deformation evaluations of scanning path effect in selective laser melting. Addit Manuf, 2016; 12:240–251.
30. 10.1016/j.jmatprotec.2016.06.03210.1016/j.jmatprotec.2016.06.032 ↗
31. 10.1115/1.402574610.1115/1.4025746 ↗
32. 10.1016/j.optlastec.2018.09.05410.1016/j.optlastec.2018.09.054 ↗
33. 10.1016/j.heliyon.2020.e0585210.1016/j.heliyon.2020.e05852 ↗
34. 10.1007/s00231-011-0866-910.1007/s00231-011-0866-9 ↗
35. Jasak H, , Jemcov A, , Tukovic Z. OpenFOAM: A C++ library for complex physics simulations. International Workshop on Coupled Methods in Numerical Dynamics. IUC Dubrovnik Croatia 1000, 2007; pp. 1–20.
36. 10.1016/j.msea.2009.02.01910.1016/j.msea.2009.02.019 ↗
37. 10.1016/j.jcrysgro.2019.05.02710.1016/j.jcrysgro.2019.05.027 ↗
38. Saunders M. X marks the spot-find ideal process parameters for your metal AM parts. White papers collection–Renishaw plc, 2017.
39. 10.1038/srep1971710.1038/srep19717 ↗
40. Diegel O Nordin A Motte D. A Practical Guide to Design for Additive Manufacturing. Springer Singapore 2019.10.1007/978-981-13-8281-9 ↗
41. 10.1016/j.jmatprotec.2006.03.15510.1016/j.jmatprotec.2006.03.155 ↗
42. 10.1016/j.matdes.2003.09.00910.1016/j.matdes.2003.09.009 ↗
43. 10.1016/S0924-0136(02)00865-810.1016/S0924-0136(02)00865-8 ↗
44. 10.1016/j.matdes.2015.12.13510.1016/j.matdes.2015.12.135 ↗