Artificial neural network (ANN) prediction of compressive strength of VARTM processed polymer composites
Source abstract
Abstract
Abstract A three layer feed forward artificial neural network (ANN) model having three input neurons, one output neuron and two hidden neurons was developed to predict the ply-lay up compressive strength of VARTM processed E-glass/polyester composites. The composites were manufactured using fabric preforms consolidated with 0, 3 and 6 wt.% of thermoplastic binder. The learning of ANN was accomplished by a backpropagation algorithm. A good agreement between the measured and the predicted values was obtained. Testing of the model was done within low average error levels of 3.28%. Furthermore, the predictions of ANN model were compared with those obtained from a multi-linear regression (MLR) model. It was found that ANN model has better predictions than MLR model for the experimental data. Also, the ANN model was subjected to a sensitivity analysis to obtain its response. As a result, the ANN model was found to have an ability to yield a desired level of ply-lay up compressive strength values for the composites processed with the addition of the thermoplastic binder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Industrial Vision Systems and Defect Detection · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Investigating the effect of a preforming binder on the mechanical properties and ballistic performance of the E-glass reinforced polyester composites10.1016/S0143-7496(02)00061-1 ↗
2. Compression in the processing of polymer composites 1. A mechanical and microstructural study for different glass fabrics and resins10.1016/S0266-3538(98)00137-7 ↗
3. Compaction of woven fabric preforms in liquid composite molding processes: single layer deformation10.1016/S0266-3538(99)00002-0 ↗
4. The implications of fiber compaction and saturation on fully coupled VARTM simulation10.1016/j.compositesa.2003.02.001 ↗
5. Compressive properties of the E-glass reinforced polyester composites tailored with a thermoplastic preforming binder10.1016/j.msea.2003.08.005 ↗
6. Artificial neural network predictions on erosive wear of polymers10.1016/S0043-1648(03)00149-2 ↗
7. Experimental and artificial neural network modeling study on soot formation in premixed hydrocarbon flames10.1016/S0016-2361(03)00060-7 ↗
8. Dynamic mechanical properties of PTFE based short carbon fiber reinforced composites: experiment and artificial neural network prediction10.1016/S0266-3538(02)00036-2 ↗
9. The use of GA-ANNs in the modeling of compressive strength of cement mortar10.1016/S0008-8846(03)00006-1 ↗