journal article·2018-02

Effects of recovery and side flow on surface generation in nano-cutting of single crystal silicon

Feifei Xu, Fengzhou Fang, Xiaodong Zhang

Publisher page

Abstract

Abstract The effects of the recovery and side flow on the surface generation, as well as the stagnation region, phase transformation in nano-cutting of single crystal silicon are investigated by means of molecular dynamics. In this study, the workpiece material would experience two cutting processes in the conditions where the recovery and subsurface damage of the former cutting trace could be and not be taken into consideration. Therefore, the combined effects of the side flow and recovery on the surface generation are decoupled and investigated respectively. The results show that the side flow of the material increases the generated surface roughness making it deviate from the theoretical value. The recovery left on the former cutting trace enlarges the size of side flow and further increases the surface roughness indirectly. But the overall surface roughness is decreased by the effect of recovery. Comparing the effects of the side flow and the recovery on the generated surface roughness, the side flow plays a more important role in surface generation of nano-cutting process. Therefore, the suppression of the side flow is an effective way to improve the generated surface roughness in nano-cutting. The phase of single crystal silicon in machined subsurface is transformed to amorphous and bct5-Si phases. A larger stagnation height would make more materials phase transformed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Hard particle effect on surface generation in nano-cutting10.1016/j.apsusc.2017.07.089 ↗
2. Nano-turning of single crystal silicon10.1016/S0924-0136(98)00024-7 ↗
3. Modelling and experimental investigation on nanometric cutting of monocrystalline silicon10.1016/j.ijmachtools.2005.03.010 ↗
4. Shaw · 2005
5. Finite element simulation of diamond tool geometries affecting the 3D surface topography in fly cutting of KDP crystals10.1007/s00170-013-4804-5 ↗
6. Effect of cutting edge radius on surface roughness and tool wear in hard turning of AISI 52100 steel
7. The upper bound of tool edge radius for nanoscale ductile mode cutting of silicon wafer10.1007/s00170-005-0245-0 ↗
8. Effect of cutting edge radius on surface roughness in diamond tool turning of transparent MgAl2O4 spinel ceramic
9. Effects of process parameters on material side flow during hard turning10.1016/S0890-6955(98)00084-4 ↗
10. Effect of material microstructure and tool geometry on surface generation in single point diamond turning10.1016/j.precisioneng.2014.01.002 ↗
11. Anisotropy of single-crystal 3C–SiC during nanometric cutting10.1088/0965-0393/21/6/065004 ↗
12. A multi-spectrum analysis of surface roughness formation in ultra-precision machining10.1016/S0141-6359(99)00033-1 ↗
13. Analysis of surface roughness generation in turning operation and its applications10.1016/S0007-8506(07)61814-9 ↗
14. A study of materials swelling and recovery in single-point diamond turning of ductile materials10.1016/j.jmatprotec.2006.06.006 ↗
15. Springback in metal cutting with high cutting speeds10.1016/j.procir.2015.03.065 ↗
16. Conservation law of surface roughness in single point diamond turning10.1016/j.ijmachtools.2014.04.006 ↗
17. A revised model for predicting surface roughness in turning10.1016/0043-1648(95)06825-2 ↗
18. Origins for the size effect of surface roughness in diamond turning10.1016/j.ijmachtools.2016.04.004 ↗
19. Material side flow in finish turning
20. Effect of plastic side flow on surface roughness in micro-turning process10.1016/j.ijmachtools.2005.11.014 ↗
21. Diamond tools wear and their applicability when ultra-precision turning of SiCp/2009Al matrix composite10.1016/j.wear.2009.09.002 ↗
22. Theoretical and empirical coupled modeling on the surface roughness in diamond turning10.1016/j.matdes.2015.05.058 ↗
23. Modelling of material side flow in hard turning10.1016/S0007-8506(07)60372-2 ↗
24. Fundamental investigation on partially overlapped nano-cutting of monocrystalline germanium10.1016/j.precisioneng.2017.02.004 ↗
25. Side flow effect on surface generation in nano cutting10.1186/s11671-017-2136-3 ↗
26. Structure of micromachined surface simulated by molecular dynamics analysis10.1016/S0007-8506(07)62162-3 ↗
27. Feasibility study on ultimate accuracy in microcutting using molecular dynamics simulation10.1016/S0007-8506(07)62399-3 ↗
28. Nano-scale machining of polycrystalline coppers – effects of grain size and machining parameters10.1186/1556-276X-8-500 ↗
29. Study on crystallographic orientation effect on surface generation of aluminum in nano-cutting10.1186/s11671-017-1990-3 ↗
30. Modeling solid-state chemistry: interatomic potentials for multicomponent systems10.1103/PhysRevB.39.5566 ↗
31. A study on the tool edge geometry effect on nano-cutting
32. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
33. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
34. Atomistic simulation of structural phase transformations in monocrystalline silicon induced by nanoindentation10.1088/0957-4484/17/9/031 ↗
35. Study on nanometric cutting of germanium by molecular dynamics simulation10.1186/1556-276X-8-13 ↗
36. Crystal orientation effect on the subsurface deformation of monocrystalline germanium in nanometric cutting10.1186/s11671-017-2047-3 ↗
37. Nanometric cutting of silicon with an amorphous-crystalline layered structure: a molecular dynamics study10.1186/s11671-017-1829-y ↗
38. Effect of temperature and stress on plastic deformation in monocrystalline silicon induced by scratching10.1063/1.1847692 ↗
39. Fundamental investigation of subsurface damage in single crystalline silicon caused by diamond machining10.1016/j.precisioneng.2008.10.008 ↗
40. In situ observation of the indentation-induced phase transformation of silicon thin films10.1103/PhysRevB.85.104102 ↗
41. Interaction between phase transformations and dislocations at incipient plasticity of monocrystalline silicon under nanoindentation10.1016/j.commatsci.2017.01.043 ↗