CCCs off-axial orientation sensitivity analysis in hole pin-bearing failure via hierarchical multiscale simulation framework
Source abstract
Abstract
In current investigation, a sequential multiscale modelling strategy together with corresponding experimental validation aimed to evaluate the influence of off-axial orientation on three-dimensional orthogonal woven carbon/carbon composites (3DOWCCCs) pin-bearing failure behavior. A hierarchical numerical simulation methodology at micro−/ meso −/macroscales was developed to obtain the predictions. With the intention of acquiring precise mechanical responses of unnotched 3DOWCCCs, fiber and void stochastic arrangements in micro-level representative volume elements (RVEs) were generated using Random Sequential Adsorption (RSA) algorithm, meanwhile the geometrical reconstruction of meso-level RVE was accomplished via X-ray computed tomography (X-CT). Moreover, off-axial angle sensitivity analysis was presented through the comparison between macroscale modelling and testing results. The stress interaction and coupling impacts were embedded in material constitutive laws, which combined Murakami-Ohno theory for yarn based on continuum damage mechanics, and exponential damage rule for carbon matrix, incorporating trilinear cohesive zone model (CZM) for interface, and the achieved predictions agreed reasonably well with the experimental results. It is concluded that, for on-axial specimen, the warp yarns fracture and material out-of-plane swelling were the primary damage mechanism, while the material out-of-plane swelling in conjunction with yarns in-plane rotation dominated the structural failure under off-axial cases.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Textile materials and evaluations · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Design, preparation and properties of carbon fiber reinforced ultra-high temperature ceramic composites for aerospace applications: a review10.1016/j.jmst.2016.08.004 ↗
2. Internal three-dimensional strain evolution of the failure process for short carbon fiber composite through in situ synchrotron radiation X-ray computed tomography10.1016/j.carbon.2019.10.026 ↗
3. A review of the structural factors which control compression in carbon fibres and their composites10.1016/j.compstruct.2022.116293 ↗
4. Damage analysis of shear pre-deformed 3D angle-interlock woven composites using experiment and non-orthogonal finite element model10.1016/j.coco.2021.100978 ↗
5. Recent advances in carbon-fiber-reinforced thermoplastic composites: a review10.1016/j.compositesb.2017.12.007 ↗
6. Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites10.1177/1045389X17705210 ↗
7. Thermo-mechanical modeling of C/C 3D orthogonal and angle interlock woven fabric composites in high temperature environment10.1016/j.mechmat.2020.103525 ↗
8. Application of a high thermal conductivity C/C composite in a heat-redistribution thermal protection system
9. A review of the catalytic oxidation of carbon-carbon composite aircraft brakes10.1016/j.carbon.2015.08.100 ↗
10. Three-dimensional pore-scale study of the directional heat transfer in a high thermal conductivity carbon/carbon composite protection system10.1016/j.ast.2021.106609 ↗
11. Mechanics of mechanically fastened joints in polymer–matrix composite structures-a review10.1016/j.compscitech.2008.09.037 ↗
12. Progressive failure analysis of three-dimensional woven carbon composites in single-bolt, double-shear bearing10.1016/j.compositesb.2015.08.082 ↗
13. Mesoscale modelling of damage in half-hole pin bearing composite laminate specimens10.1016/j.compstruct.2019.01.062 ↗
14. Uncertainty evaluation for bearing fatigue property of CFRP double-lap, single-bolt joints10.1016/j.cja.2021.07.005 ↗
15. Study on bearing strength and failure mode of a carbon-epoxy composite laminate for designing bolted joint structures10.1016/j.compstruct.2020.112023 ↗
16. Experimental characterization of the bearing behavior of 3D woven composites10.1016/j.compositesb.2016.10.077 ↗
17. Behavior of three-dimensional woven carbon composites in single-bolt bearing10.1016/j.compstruct.2015.03.022 ↗
18. Bearing damage characteristics of fibre-reinforced countersunk composite bolted joints subjected to quasi-static shear loading10.1016/j.compstruct.2017.01.029 ↗
19. Failure load prediction of composite bolted joint with clamping force10.1016/j.compstruct.2018.01.037 ↗
20. Bearing strength and failure behavior of bolted composite joints (part I: experimental investigation)10.1016/j.compscitech.2005.02.011 ↗
21. Static and dynamic failure behaviour of bolted joints in carbon fibre composites10.1016/j.compositesa.2012.12.003 ↗
22. An experimental investigation on interfacial behavior and preload response of composite bolted interference-fit joints under assembly and thermal conditions
23. Effects of temperature on the bearing strength of CF/epoxy pinned joints10.1177/0021998306063374 ↗
24. Bearing strength of carbon fibre/epoxy laminates: effects of bolt-hole clearance10.1016/j.compositesb.2003.11.001 ↗
25. Analysis of bolted joints in composite laminates: strains and bearing stiffness predictions10.1016/j.compstruct.2006.02.024 ↗
26. Bearing strength and failure behavior of bolted composite joints (part II: modeling and simulation)10.1016/j.compscitech.2004.12.049 ↗
27. Nonlinear numerical analysis of the V-notched rail shear test specimen10.1016/j.polymertesting.2017.11.008 ↗
28. Phenomenological constitutive modeling of the non-linear loading-unloading response of UD fiber-reinforced polymers10.1016/j.compstruct.2022.115671 ↗
29. Stress fracture criteria for laminated composites containing stress concentrations10.1177/002199837400800303 ↗
30. Characteristic length determination of notched woven composites10.1080/09243046.2016.1232007 ↗
31. A nonlinear FE analysis to model progressive fatigue damage of cross-ply laminates under pin-loaded conditions10.1016/j.ijfatigue.2018.10.010 ↗
32. A 3D RVE model with periodic boundary conditions to estimate mechanical properties of composites
33. A new constitutive model to predict effective elastic properties of plain weave fabric composites
34. Strength prediction of woven composite rings using progressive damage modeling10.1177/1056789519901294 ↗
35. Periodic homogenization for fully coupled thermomechanical modeling of dissipative generalized standard materials10.1016/j.ijplas.2016.01.013 ↗
36. Fully coupled thermo-viscoplastic analysis of composite structures by means of multi-scale three-dimensional finite element computations10.1016/j.ijsolstr.2019.01.018 ↗
37. Three-dimensional progressive damage and failure analysis of double-lap composite bolted joints under quasi-static tensile loading10.1016/j.compstruct.2022.115227 ↗
38. The effect of off-axis angles on the mesoscale deformation response and failure behavior of an orthotropic textile carbon-epoxy composite10.1016/j.compstruct.2018.08.010 ↗
39. Off-axial angle sensitivity of 3D orthogonal woven composite failure behavior subjected to in-plane compressive loading10.1016/j.tws.2020.107149 ↗
40. Multi-scale structure modeling of damage behaviors of 3D orthogonal woven composite materials subject to quasi-static and high strain rate compressions10.1016/j.mechmat.2015.11.012 ↗
41. ASTM International · 2010
42. The effect of electrical discharge machining parameters on the surface quality of 3D woven carbon/carbon composite10.1016/j.matpr.2021.11.138 ↗
43. Predicting the overall response of an orthogonal 3D woven composite using simulated and tomography-derived geometry10.1016/j.compstruct.2020.112169 ↗
44. Reconstruction of mesostructural material twin models of engineering textiles based on micro-CT aided geometric modeling10.1016/j.compositesa.2019.105481 ↗
45. Multiscale modeling and failure analysis of an 8-harness satin woven composite10.1016/j.compstruct.2020.112186 ↗
46. A numerical approximation to the elastic properties of sphere-reinforced composites10.1016/S0022-5096(02)00021-2 ↗
47. A multiscale modeling for predicting the thermal expansion behaviors of 3D C/SiC composites considering porosity and fiber volume fraction10.1016/j.ceramint.2020.11.142 ↗
48. Coefficient of friction of composite delamination surfaces10.1016/S0043-1648(99)00315-4 ↗
49. On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites10.1016/j.ijsolstr.2005.03.055 ↗
50. A unified periodical boundary conditions for representative volume elements of composites and applications10.1016/S0020-7683(03)00024-6 ↗
51. Accelerated testing for long-term durability of FRP laminates for marine use10.1177/0021998305046430 ↗
52. Experimental and numerical investigation on mechanical behaviors of woven fabric composites under off-axial loading10.1016/j.ijmecsci.2018.03.030 ↗
53. Chamis · 2022
54. Intralayer hybridization of triaxially braided composite lamina using carbon and basalt fibers: experimental and numerical study10.1016/j.compstruct.2021.113896 ↗
55. Failure criteria for unidirectional fiber composites10.1115/1.3153664 ↗
56. Finite element analysis of damaged woven fabric composite materials10.1016/S0266-3538(02)00211-7 ↗
57. Progressive damage modeling in fiber-reinforced materials10.1016/j.compositesa.2007.01.017 ↗
58. Crack band theory for fracture of concrete
59. A new anisotropic elasto-plastic-damage model for quasi-brittle materials using strain energy equivalence10.1016/j.mechmat.2021.104163 ↗
60. Micromechanical analysis of polymer composites reinforced by unidirectional fibres: part I - constitutive modelling10.1016/j.ijsolstr.2013.02.009 ↗
61. A progressive damage model for three-dimensional woven composites under ballistic impact loading10.1088/2631-8695/ab3ba6 ↗
62. On the influence of the shape of the interface law on the application of cohesive-zone models10.1016/j.compscitech.2004.12.024 ↗
63. Cohesive zone length in numerical simulations of composite delamination10.1016/j.engfracmech.2008.06.004 ↗
64. Application of the effective crack method to mode I and mode II interlaminar fracture of carbon/epoxy unidirectional laminates10.1016/j.compositesa.2006.09.001 ↗
65. Experimental and numerical investigation of mode II fracture in fibrous reinforced composites10.1177/0731684410397682 ↗
66. Modeling of the non-linear mechanical and thermomechanical behavior of 3D carbon/carbon composites based on internal interfaces10.1016/j.carbon.2019.07.101 ↗
67. Identification of material parameters for modelling delamination in the presence of fibre bridging10.1016/j.compstruct.2012.05.014 ↗
68. Appropriate shape of cohesive zone model for delamination propagation in ENF specimens with R-curve effects10.1016/j.tafmec.2017.04.009 ↗
69. Finite element modeling of mode I delamination growth in laminated DCB specimens with R-curve effects10.1016/j.compositesb.2012.09.051 ↗
70. Duvant · 1976 · 219 · 278
71. A multi-scale stochastic model for damage analysis and performance dispersion study of a 2.5D fiber-reinforced ceramic matrix composites10.1016/j.compstruct.2020.112549 ↗
72. Multiscale damage modelling of 3D woven composites under static and impact loads10.1016/j.compositesa.2021.106659 ↗
73. A progressive damage model for mechanically fastened joints in composite laminates10.1177/002199839903302402 ↗
74. An energy based damage mechanics approach to modelling impact onto woven composite materials-part I: numerical models10.1016/j.compositesa.2005.12.013 ↗
75. An insight into the mechanical behavior of adhesively bonded plain-woven-composite joints using multiscale modeling10.1016/j.ijmecsci.2022.107063 ↗
76. Effect of weaving processes on compressive behavior of 3D woven composites10.1016/j.compositesa.2006.02.025 ↗
77. Numerical investigation on the effect of tow tension on the geometry of three-dimensional orthogonally woven fabric10.1177/0040517518821912 ↗
78. Investigation of the Z-binder role in progressive damage of 3D woven composites10.1016/j.compositesa.2016.11.022 ↗